On Wednesday 04 June 2003 17:51, Lars Goldschlager
wrote:> Greetings all... I write because i''ve been battlign a
> problem with tc for two days and I can''t find a
> solution or a response to the failure... Basically I
> am trying to shape marked packages since I have a NAT
> and I discovered of course that I couldn''t shape based
> on ip with the NAT in place, for the rule didn''t
> apply... so I set a mark to the packages depending on
> the ip they came from, but then when I try to
> implement the filter to match these packages into a
> queue rule I get the following error from tc:
> RTNETLINK answers: Invalid argument
>
> The sytnax I am using is the following:
> /sbin/tc filter add dev eth0 parent 1:0 protocol ip
> prio 1 handle 188 fw flowid 1:3
>
> I''ve tried diferent syntaxes to no avail, I am
> thinking of trying to use an always-matching u32 rule
> instead of fw but I do not know if that is possible or
> if it''ll ever work... also i''ve checked the kernel and
> I seem to have everything I need compiled, anyhow if
> someone sends me the list of options I need for this
> specific type of filter I can recheck... anyhow
> advanced routing is compiled, such as multiple
> tables.. and I have cls_fw as a module which loads
> correctly into kernel...... Any pointers please???
Do you have a class 1:3? If not, that''s why got the error.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/