LARTC - Apr 2003 - What''s wrong with this loadbalancing ?

Hello

I have 4 nic eth 1,2,3,4 connecting to DSL lines and 1 NIC is eth5
xxx.xxx.xxx.xxx to a ISDN 24/7 dailin line.
eth0 192.168.1.0 is the LAN network

I like to balance these

Why is it still dead if I ad a default gw then traffic is running over that
gw.

ip route show output :

192.168.1.0/24 dev eth0  scope link
10.0.1.0/24 dev eth1  scope link
10.0.2.0/24 dev eth2  scope link
10.0.3.0/24 dev eth3  scope link
10.0.4.0/24 dev eth4  scope link
xxx.xxx.xxx.0/25 dev eth5  scope link
127.0.0.0/8 dev lo  scope link
default
 nexthop dev eth1 weight 1
 nexthop dev eth2 weight 1
 nexthop dev eth3 weight 1
 nexthop dev eth4 weight 1
 nexthop dev eth5 weight 4

Kernel version 2.4.20
compiled with julian''s patch
Equal cost multipath is on.

iproute2 version ss001007 is running a newer version gives deadlink on
pervasive (whatever it means) !!!


Thanks

Sjaak

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello,

On Thu, 3 Apr 2003, Sjaak Nabuurs wrote:
> iproute2 version ss001007 is running a newer version gives deadlink on
> pervasive (whatever it means) !!!
	This version fixes the problem:

ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.4.7-now-ss020116-try.tar.gz

Regards

--
Julian Anastasov <ja@ssi.bg>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/