HI; I am trying to write my own class based queue. But as usual some problems seems not to be resolved. I have achieved to send package through my queue. This can be done if I not attach class or filters. If I do try to attach class or filter, my computer stops. I can not read any message, nor do anything. My only choice is to push power button in order to reboot. I have not written code for procedure "dump", but this procedure is called twice after init. My "qdisc" is compiled as module and if I do "insmod", it is loaded in to kernel. This operation do not report any error. /sbin/lsmod report Module Size Used by Not tainted sch_htb 21088 1 sch_kll 9608 0 (autoclean) (unused) 3c59x 28520 2 When I now configure this module width my patched tc file, it does not change. It still says used by 0 and (unused). So my question is: 1: Is return value from dump procedure responsible for incrementing used value for module?? 2. Is there any, that is implementing class based queue and want some company?? Any suggestion is appreciated, Thanks in advance Lars Student _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/