Hello,
I have a setup that looks like this:
|--------- |-----------------------|
| ADSL1 |----| Linux 2.4.20 |
|________| | + static routes patch | |-------|
| + Masquerading |-----| LAN |
|--------- | + HTB on LAN egress | |_______|
| ADSL1 |----|_______________________|
|________| /
/
}-------| /
| ADSL3 |/
|_______|
I followed the "Nano-howto" to set up the load balancing and that
seems to work just fine.
I have worked out some classes with HTB that would look nice for one external
interface. I want to allow any lowpriority traffic to use all the bandwidth,
from all three interfaces when nothing else is coming through.
Setting the shaping rate to the sum of ADSL1,ADSL2 and ADSL3 will (of course)
not give satisfying results.
I would like to have some sort of shared rate between the external interfaces
while still shaping on LAN egress (does this make sense). Preferably this would
be combined with dead gateway detection, so that the $RATE cuts to half when one
external interface is down.
Sending too much traffic out on one ADSL fills it''s buffer and destroys
latency, so I really do not wish for this to happen at all.
What would be the best way to determine the rate to shape at?
TIA,
Jussi Norlund
--
"To do is to be." - Socrates. "To be is to do." - Plato.
"Skoo be do be do." - Sinatra.
1024D/805498C0
AC06 7251 B58B 7A3F 0168 758F 3252 F725 8054 98C0
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/