My previous message was confusing, so i try again..i want manage outgoing traffic with linuxpc/iproute2/HTB, but i am newbie with routing. Below is my "drawing", hope it helps :) So i want to put linuxpc between fw and LAN. internet-------eth0[fw/NAT]eth1-------eth0[linuxpc]eth1-----LAN (10.2.0/20) fw/NAT: eth1 10.2.0.1/20 linuxpc: eth0 10.2.0.2 and eth1 10.2.0.3 Linuxpc has kernel 2.4.20 and new tc, so i should be able to use HTB. How should i route traffic from linuxpc eth1 to eth0, if i want to use qdisc''s? What should i do before creating qdisc? Thank you for helping me. regards, Asko ............................................................ Maksuton sähköposti aina käytössä http://luukku.com Kuukausimaksuton MTV3 Internet-liittymä www.mtv3.fi/liittyma _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/