I implemented a new network protocol(called QRoute), the Eth protocol code
is 0x8000(for unicast) and 0x8001(for multicast), and there are 2 kind of
QRoute packets: data packet( the first 2 bytes is 0x40), and control
packet(the fist 2 bytes is 0x00, 0x10,0x20 or 0x30). There are 3 kinds of
packets in the network: IP packets, Qroute(including unicast and
multicast) data packets, and Qroute control packet. I want to classify
these 3 kinds of packets, how can I do it? I tried to use: "tc filter add
dev eth0 parent 1:0 protocol ip prio 1 u32 match u16 0x8000 0xffff at -2
flowid 1:10" to classfiy the Qroute unicast packet, but it doesn''t
work.
There is a protocol called "802.1Q" whose Eth protocol code is
0x8001(It
can be found in "iproute2/lib/lI_proto.c"), so I tried to use "tc
filter
add dev eth0 parent 1:0 protocol 802.1Q prio 1 u32 match u16 0x8000 0xffff
at -2 flowid 1:10", and it works. but it can''t further classify
the
packets according to the first 2 bytes! And I tried to add protocol
{0x8000, "QRoute"} in "iproute2/lib/lI_proto.c and compiled the
iproute2
packet again, then tried " tc filter add dev eth0 parent 1:0 protocol
QRoute prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", it still
doesn''t work! anyone can help me ? Thanks very much
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have successfully classified QRoute packet from IP packet by adding
{0x8000, "qroute"} to /iproute2/lib/ll_protocol.c, and make iproute2
again,then use: "tc filter add dev eth0 parent 1: prio 5 protocol qroute
u32
match u8 0x00 0x00 at 0 flowid 1:10". It will classify the all the qroute
packet to flow 1:10. Now I want to further classify QRoute packet according
to the first 2 bytes of the packet, I have tried to use tc filter add dev
eth0 parent 1: prio 6 protocol qroute u32 match u8 0x40 0xff at 0 flowid
1:20", but it doesn''t work! anyone know how to do it?
----- Original Message -----
From: "Liu Zhiyong" <liuzhiyo@comp.nus.edu.sg>
To: <lartc@mailman.ds9a.nl>
Sent: Wednesday, February 05, 2003 11:24 AM
Subject: [LARTC] to classify non-IP packet???
> I implemented a new network protocol(called QRoute), the Eth protocol code
> is 0x8000(for unicast) and 0x8001(for multicast), and there are 2 kind of
> QRoute packets: data packet( the first 2 bytes is 0x40), and control
> packet(the fist 2 bytes is 0x00, 0x10,0x20 or 0x30). There are 3 kinds of
> packets in the network: IP packets, Qroute(including unicast and
> multicast) data packets, and Qroute control packet. I want to classify
> these 3 kinds of packets, how can I do it? I tried to use: "tc filter
add
> dev eth0 parent 1:0 protocol ip prio 1 u32 match u16 0x8000 0xffff at -2
> flowid 1:10" to classfiy the Qroute unicast packet, but it
doesn''t work.
> There is a protocol called "802.1Q" whose Eth protocol code is
0x8001(It
> can be found in "iproute2/lib/lI_proto.c"), so I tried to use
"tc filter
> add dev eth0 parent 1:0 protocol 802.1Q prio 1 u32 match u16 0x8000 0xffff
> at -2 flowid 1:10", and it works. but it can''t further
classify the
> packets according to the first 2 bytes! And I tried to add protocol
> {0x8000, "QRoute"} in "iproute2/lib/lI_proto.c and compiled
the iproute2
> packet again, then tried " tc filter add dev eth0 parent 1:0 protocol
> QRoute prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", it still
> doesn''t work! anyone can help me ? Thanks very much
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have successfully classified QRoute packet from IP packet by adding
{0x8000, "qroute"} to /iproute2/lib/ll_protocol.c, and make iproute2
again,then use: "tc filter add dev eth0 parent 1: prio 5 protocol qroute
u32
match u8 0x00 0x00 at 0 flowid 1:10". It will classify the all the qroute
packet to flow 1:10. Now I want to further classify QRoute packet according
to the first 2 bytes of the packet, I have tried to use tc filter add dev
eth0 parent 1: prio 6 protocol qroute u32 match u8 0x40 0xff at 0 flowid
1:20", but it doesn''t work! anyone know how to do it?
----- Original Message -----
From: "Liu Zhiyong" <liuzhiyo@comp.nus.edu.sg>
To: <lartc@mailman.ds9a.nl>
Sent: Wednesday, February 05, 2003 11:24 AM
Subject: [LARTC] to classify non-IP packet???
> I implemented a new network protocol(called QRoute), the Eth protocol code
> is 0x8000(for unicast) and 0x8001(for multicast), and there are 2 kind of
> QRoute packets: data packet( the first 2 bytes is 0x40), and control
> packet(the fist 2 bytes is 0x00, 0x10,0x20 or 0x30). There are 3 kinds of
> packets in the network: IP packets, Qroute(including unicast and
> multicast) data packets, and Qroute control packet. I want to classify
> these 3 kinds of packets, how can I do it? I tried to use: "tc filter
add
> dev eth0 parent 1:0 protocol ip prio 1 u32 match u16 0x8000 0xffff at -2
> flowid 1:10" to classfiy the Qroute unicast packet, but it
doesn''t work.
> There is a protocol called "802.1Q" whose Eth protocol code is
0x8001(It
> can be found in "iproute2/lib/lI_proto.c"), so I tried to use
"tc filter
> add dev eth0 parent 1:0 protocol 802.1Q prio 1 u32 match u16 0x8000 0xffff
> at -2 flowid 1:10", and it works. but it can''t further
classify the
> packets according to the first 2 bytes! And I tried to add protocol
> {0x8000, "QRoute"} in "iproute2/lib/lI_proto.c and compiled
the iproute2
> packet again, then tried " tc filter add dev eth0 parent 1:0 protocol
> QRoute prio 1 u32 match u16 0x8000 0xffff at -2 flowid 1:10", it still
> doesn''t work! anyone can help me ? Thanks very much
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have successfully classified QRoute packet from IP packet by adding
{0x8000, "qroute"} to /iproute2/lib/ll_protocol.c, and make iproute2
again,then use: "tc filter add dev eth0 parent 1: prio 5 protocol qroute
u32
match u8 0x00 0x00 at 0 flowid 1:10". It will classify the all the qroute
packet to flow 1:10. Now I want to further classify QRoute packet according
to the first 2 bytes of the packet, I have tried to use tc filter add dev
eth0 parent 1: prio 6 protocol qroute u32 match u8 0x40 0xff at 0 flowid
1:20", but it doesn''t work! anyone know how to do it?
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/