I''ve attached outputs for eth0 and eth1. I was trying to get this script running. I''ve added one class for my NATed BOX, and it helped. Shaping was stable almost one day but then i added "prio 0" to eth0 filters and prio 0 for eth1 filters it has braken. So i removed every "prio 0" and reboot the box but it didnt helped :(. I''ve noticed that when the traffic is not much (14 hosts from 50 are up) tc/htb works very well. If you want new version of my script say a word. ----- Original Message ----- From: "devik" <devik@cdi.cz> To: <mjoachimiak@poczta.onet.pl> Sent: Thursday, July 22, 2004 3:48 PM Subject: Re: HTB 3.13 please help> I need > tc -s -d class show dev xxx > output during that non-working period. 3.6 is older than 3.13. > > ------------------------------- > Martin Devera aka devik > Linux kernel QoS/HTB maintainer > http://luxik.cdi.cz/~devik/ > > On Wed, 21 Jul 2004 mjoachimiak@poczta.onet.pl wrote: > > > Thanks for your reply. I''ve recent put my problem on lartc list. I''musing> > htb 3.13 in 2-4-25smp. > > I wonder if upgrade to 3.6 will help? Could you be so kind and take alook> > at it. I''ll be grateful. > > If you have no time for me i''ll understand and try to resolve it formyself.> > Thanks. > > > > Hello everybody! > > Since week i dig lists and www and can''t find solution for my problem. > > I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. > > I''ve got situation like this: > > > > LAN------Linux Box(routing only)------- Linux Box > > (HTB)--------------Hardware Router(say:HD)------Internet > > When I start HTB it takes about 5 min. to start working and it works... > > within this 5min starting i can''t ping HD and after about 5min I start > > pinging. It works like this for cuple of hours, then something strangeis> > happening. Ping stops, www doesn''t work but radio (36kbps) (fromclients)> > works. There is no ping at all for about 1min and it starts pinging for > > about 2-3min and it stops for 1-2min and so on..... > > When I stop HTB ping starts. It''s look like HTB is filled to much(sorryfor> > my english :/) > > All my children classes rate doesn''t exceeds root classes. I have 50classes> > on 900kbit-10kbit(for default class) - downstream and 800-10kbit(for > > default) up. > > I shape bandwidth matching ip. r2q is set to 1 . no erros during doingshape> > script. > > I''m attaching this script > > in ip1 is file where are written ip''s for C classes. > > > > I''m including my script. > > ---------------------------------------------------cut > >here -----------------------------------------------------------------------> > ------------ > > #!/bin/bash > > #x=$[100/20] > > #echo "$1" > /skrytpy/status > > rxmax=900 #WAN max transfer -down (physically it is 960kbit/960kbit) > > kbit=kbit > > rxmaxluser=250 > > txmax=800 #WAN max transfer - up > > txmaxluser=100 > > #counting users > > # ip1 file is like this: > > # 11 #Somebody > > # 23 #Somebody II > > #EOF > > licznik=0 > > for x in $(awk ''{ print $1 }'' /skrytpy/ip1); do > > licznik=$[$licznik+1] > > done > > > > > > #Server > > licznik=$[$licznik+1] > > #plus router > > licznik=$[$licznik+1] > > > > echo number of users to $licznik > > #counting rate > > rx1=$[$rxmax-10] > > tx1=$[$txmax-10] # dla klasy domyslnej > > rxmin=$[$rx1/$licznik] > > txmin=$[$tx1/$licznik] > > echo rx $rxmin tx $txmin > > #echo $rxmin > > #root classes > > #rx > > tc qdisc del root dev eth1 > > tc qdisc add dev eth1 root handle 1:0 htb r2q 1 default 2 > > tc class add dev eth1 parent 1:0 classid 1:1 htb rate $rxmax$kbit ceil > > $rxmax$kbit > > #tx > > tc qdisc del root dev eth0 > > tc qdisc add dev eth0 root handle 2:0 htb r2q 1 default 4 > > tc class add dev eth0 parent 2:0 classid 2:1 htb rate $txmax$kbit ceil > > $txmax$kbit > > #r="$rxmax$kbit" > > #default classes > > #rx > > tc class add dev eth1 parent 1:1 classid 1:2 htb rate 10kbit ceil 10kbit > > #tx > > tc class add dev eth0 parent 2:1 classid 2:4 htb rate 10kbit ceil 10kbit> > #siec 1.0 > > siec=1 > > for ip in $(awk ''{ print $1 }'' /skrytpy/ip1); do > > echo -n "$ip " > > #rx > > tc class add dev eth1 parent 1:1 classid 1:$ip htb rate $rxmin$kbit ceil > > $rxmaxluser$kbit > > tc filter add dev eth1 protocol ip parent 1:0 u32 match ip dst > > 192.168.$siec.$ip flowid 1:$ip > > tc qdisc add dev eth1 parent 1:$ip handle $ip:0 sfq perturb 10 > > #tx > > #marking packets > > iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.$siec.$ip -j > > MARK --set-mark $ip > > #tc > > tc class add dev eth0 parent 2:1 classid 2:$ip htb rate $txmin$kbit ceil > > $txmaxluser$kbit > > #filtering by mark > > tc filter add dev eth0 protocol ip preference 1 parent 2:0 handle $ip fw > > flowid 2:$ip > > tc qdisc add dev eth0 parent 2:$ip handle $ip:1 sfq perturb 10 > > done > > echo "" > > > > --------------------------------------------------------------------cut > > here ------------------------------------------------------------------ > > > > > > >
Yes I''m using smp kernel. I thought that i make some error that i canot see so i decided to write my classes using tcng this time. Currently i''m shaping only outgoing traffic to my local network(using tcng) and it seems to work (it work one day without errors). Today i''m going to configure upload too. The difference i could see at once is that there is no connection loss when i''m starting htb. ----- Original Message ----- From: "devik" <devik@cdi.cz> To: <mjoachimiak@poczta.onet.pl> Cc: "lartc" <lartc@mailman.ds9a.nl> Sent: Sunday, July 25, 2004 10:26 AM Subject: Re: [LARTC] Re: HTB 3.13 please help> From the stats is seems that no data are queued - as if nobody > is sending them. You are using smp kernel, is your box SMP ? > I haven''t seen many smp+htb boxes thus there might be possibility > of a bug... > devik > > On Thu, 23 Jan 2003 mjoachimiak@poczta.onet.pl wrote: > > > I''ve attached outputs for eth0 and eth1. > > I was trying to get this script running. I''ve added one class for myNATed> > BOX, and it helped. Shaping was stable almost one day but then i added"prio> > 0" to eth0 filters and prio 0 for eth1 filters it has braken. So iremoved> > every "prio 0" and reboot the box but it didnt helped :(. > > I''ve noticed that when the traffic is not much (14 hosts from 50 are up) > > tc/htb works very well. > > If you want new version of my script say a word. > > ----- Original Message ----- > > From: "devik" <devik@cdi.cz> > > To: <mjoachimiak@poczta.onet.pl> > > Sent: Thursday, July 22, 2004 3:48 PM > > Subject: Re: HTB 3.13 please help > > > > > > > I need > > > tc -s -d class show dev xxx > > > output during that non-working period. 3.6 is older than 3.13. > > > > > > ------------------------------- > > > Martin Devera aka devik > > > Linux kernel QoS/HTB maintainer > > > http://luxik.cdi.cz/~devik/ > > > > > > On Wed, 21 Jul 2004 mjoachimiak@poczta.onet.pl wrote: > > > > > > > Thanks for your reply. I''ve recent put my problem on lartc list. I''m > > using > > > > htb 3.13 in 2-4-25smp. > > > > I wonder if upgrade to 3.6 will help? Could you be so kind and takea> > look > > > > at it. I''ll be grateful. > > > > If you have no time for me i''ll understand and try to resolve it for > > myself. > > > > Thanks. > > > > > > > > Hello everybody! > > > > Since week i dig lists and www and can''t find solution for myproblem.> > > > I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. > > > > I''ve got situation like this: > > > > > > > > LAN------Linux Box(routing only)------- Linux Box > > > > (HTB)--------------Hardware Router(say:HD)------Internet > > > > When I start HTB it takes about 5 min. to start working and itworks...> > > > within this 5min starting i can''t ping HD and after about 5min Istart> > > > pinging. It works like this for cuple of hours, then somethingstrange> > is > > > > happening. Ping stops, www doesn''t work but radio (36kbps) (from > > clients) > > > > works. There is no ping at all for about 1min and it starts pingingfor> > > > about 2-3min and it stops for 1-2min and so on..... > > > > When I stop HTB ping starts. It''s look like HTB is filled tomuch(sorry> > for > > > > my english :/) > > > > All my children classes rate doesn''t exceeds root classes. I have 50 > > classes > > > > on 900kbit-10kbit(for default class) - downstream and 800-10kbit(for > > > > default) up. > > > > I shape bandwidth matching ip. r2q is set to 1 . no erros duringdoing> > shape > > > > script. > > > > I''m attaching this script > > > > in ip1 is file where are written ip''s for C classes. > > > > > > > > I''m including my script. > > > > ---------------------------------------------------cut > > > > > >here -----------------------------------------------------------------------> > > > ------------ > > > > #!/bin/bash > > > > #x=$[100/20] > > > > #echo "$1" > /skrytpy/status > > > > rxmax=900 #WAN max transfer -down (physically it is 960kbit/960kbit) > > > > kbit=kbit > > > > rxmaxluser=250 > > > > txmax=800 #WAN max transfer - up > > > > txmaxluser=100 > > > > #counting users > > > > # ip1 file is like this: > > > > # 11 #Somebody > > > > # 23 #Somebody II > > > > #EOF > > > > licznik=0 > > > > for x in $(awk ''{ print $1 }'' /skrytpy/ip1); do > > > > licznik=$[$licznik+1] > > > > done > > > > > > > > > > > > #Server > > > > licznik=$[$licznik+1] > > > > #plus router > > > > licznik=$[$licznik+1] > > > > > > > > echo number of users to $licznik > > > > #counting rate > > > > rx1=$[$rxmax-10] > > > > tx1=$[$txmax-10] # dla klasy domyslnej > > > > rxmin=$[$rx1/$licznik] > > > > txmin=$[$tx1/$licznik] > > > > echo rx $rxmin tx $txmin > > > > #echo $rxmin > > > > #root classes > > > > #rx > > > > tc qdisc del root dev eth1 > > > > tc qdisc add dev eth1 root handle 1:0 htb r2q 1 default 2 > > > > tc class add dev eth1 parent 1:0 classid 1:1 htb rate $rxmax$kbitceil> > > > $rxmax$kbit > > > > #tx > > > > tc qdisc del root dev eth0 > > > > tc qdisc add dev eth0 root handle 2:0 htb r2q 1 default 4 > > > > tc class add dev eth0 parent 2:0 classid 2:1 htb rate $txmax$kbitceil> > > > $txmax$kbit > > > > #r="$rxmax$kbit" > > > > #default classes > > > > #rx > > > > tc class add dev eth1 parent 1:1 classid 1:2 htb rate 10kbit ceil10kbit> > > > #tx > > > > tc class add dev eth0 parent 2:1 classid 2:4 htb rate 10kbit ceil10kbit> > > > > > #siec 1.0 > > > > siec=1 > > > > for ip in $(awk ''{ print $1 }'' /skrytpy/ip1); do > > > > echo -n "$ip " > > > > #rx > > > > tc class add dev eth1 parent 1:1 classid 1:$ip htb rate $rxmin$kbitceil> > > > $rxmaxluser$kbit > > > > tc filter add dev eth1 protocol ip parent 1:0 u32 match ip dst > > > > 192.168.$siec.$ip flowid 1:$ip > > > > tc qdisc add dev eth1 parent 1:$ip handle $ip:0 sfq perturb 10 > > > > #tx > > > > #marking packets > > > > iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.$siec.$ip -j > > > > MARK --set-mark $ip > > > > #tc > > > > tc class add dev eth0 parent 2:1 classid 2:$ip htb rate $txmin$kbitceil> > > > $txmaxluser$kbit > > > > #filtering by mark > > > > tc filter add dev eth0 protocol ip preference 1 parent 2:0 handle$ip fw> > > > flowid 2:$ip > > > > tc qdisc add dev eth0 parent 2:$ip handle $ip:1 sfq perturb 10 > > > > done > > > > echo "" > > > > > > > > --------------------------------------------------------------------cut > > > >here ------------------------------------------------------------------> > > > > > > > > > > > > > > > > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
From the stats is seems that no data are queued - as if nobody is sending them. You are using smp kernel, is your box SMP ? I haven''t seen many smp+htb boxes thus there might be possibility of a bug... devik On Thu, 23 Jan 2003 mjoachimiak@poczta.onet.pl wrote:> I''ve attached outputs for eth0 and eth1. > I was trying to get this script running. I''ve added one class for my NATed > BOX, and it helped. Shaping was stable almost one day but then i added "prio > 0" to eth0 filters and prio 0 for eth1 filters it has braken. So i removed > every "prio 0" and reboot the box but it didnt helped :(. > I''ve noticed that when the traffic is not much (14 hosts from 50 are up) > tc/htb works very well. > If you want new version of my script say a word. > ----- Original Message ----- > From: "devik" <devik@cdi.cz> > To: <mjoachimiak@poczta.onet.pl> > Sent: Thursday, July 22, 2004 3:48 PM > Subject: Re: HTB 3.13 please help > > > > I need > > tc -s -d class show dev xxx > > output during that non-working period. 3.6 is older than 3.13. > > > > ------------------------------- > > Martin Devera aka devik > > Linux kernel QoS/HTB maintainer > > http://luxik.cdi.cz/~devik/ > > > > On Wed, 21 Jul 2004 mjoachimiak@poczta.onet.pl wrote: > > > > > Thanks for your reply. I''ve recent put my problem on lartc list. I''m > using > > > htb 3.13 in 2-4-25smp. > > > I wonder if upgrade to 3.6 will help? Could you be so kind and take a > look > > > at it. I''ll be grateful. > > > If you have no time for me i''ll understand and try to resolve it for > myself. > > > Thanks. > > > > > > Hello everybody! > > > Since week i dig lists and www and can''t find solution for my problem. > > > I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. > > > I''ve got situation like this: > > > > > > LAN------Linux Box(routing only)------- Linux Box > > > (HTB)--------------Hardware Router(say:HD)------Internet > > > When I start HTB it takes about 5 min. to start working and it works... > > > within this 5min starting i can''t ping HD and after about 5min I start > > > pinging. It works like this for cuple of hours, then something strange > is > > > happening. Ping stops, www doesn''t work but radio (36kbps) (from > clients) > > > works. There is no ping at all for about 1min and it starts pinging for > > > about 2-3min and it stops for 1-2min and so on..... > > > When I stop HTB ping starts. It''s look like HTB is filled to much(sorry > for > > > my english :/) > > > All my children classes rate doesn''t exceeds root classes. I have 50 > classes > > > on 900kbit-10kbit(for default class) - downstream and 800-10kbit(for > > > default) up. > > > I shape bandwidth matching ip. r2q is set to 1 . no erros during doing > shape > > > script. > > > I''m attaching this script > > > in ip1 is file where are written ip''s for C classes. > > > > > > I''m including my script. > > > ---------------------------------------------------cut > > > > here ----------------------------------------------------------------------- > > > ------------ > > > #!/bin/bash > > > #x=$[100/20] > > > #echo "$1" > /skrytpy/status > > > rxmax=900 #WAN max transfer -down (physically it is 960kbit/960kbit) > > > kbit=kbit > > > rxmaxluser=250 > > > txmax=800 #WAN max transfer - up > > > txmaxluser=100 > > > #counting users > > > # ip1 file is like this: > > > # 11 #Somebody > > > # 23 #Somebody II > > > #EOF > > > licznik=0 > > > for x in $(awk ''{ print $1 }'' /skrytpy/ip1); do > > > licznik=$[$licznik+1] > > > done > > > > > > > > > #Server > > > licznik=$[$licznik+1] > > > #plus router > > > licznik=$[$licznik+1] > > > > > > echo number of users to $licznik > > > #counting rate > > > rx1=$[$rxmax-10] > > > tx1=$[$txmax-10] # dla klasy domyslnej > > > rxmin=$[$rx1/$licznik] > > > txmin=$[$tx1/$licznik] > > > echo rx $rxmin tx $txmin > > > #echo $rxmin > > > #root classes > > > #rx > > > tc qdisc del root dev eth1 > > > tc qdisc add dev eth1 root handle 1:0 htb r2q 1 default 2 > > > tc class add dev eth1 parent 1:0 classid 1:1 htb rate $rxmax$kbit ceil > > > $rxmax$kbit > > > #tx > > > tc qdisc del root dev eth0 > > > tc qdisc add dev eth0 root handle 2:0 htb r2q 1 default 4 > > > tc class add dev eth0 parent 2:0 classid 2:1 htb rate $txmax$kbit ceil > > > $txmax$kbit > > > #r="$rxmax$kbit" > > > #default classes > > > #rx > > > tc class add dev eth1 parent 1:1 classid 1:2 htb rate 10kbit ceil 10kbit > > > #tx > > > tc class add dev eth0 parent 2:1 classid 2:4 htb rate 10kbit ceil 10kbit > > > > #siec 1.0 > > > siec=1 > > > for ip in $(awk ''{ print $1 }'' /skrytpy/ip1); do > > > echo -n "$ip " > > > #rx > > > tc class add dev eth1 parent 1:1 classid 1:$ip htb rate $rxmin$kbit ceil > > > $rxmaxluser$kbit > > > tc filter add dev eth1 protocol ip parent 1:0 u32 match ip dst > > > 192.168.$siec.$ip flowid 1:$ip > > > tc qdisc add dev eth1 parent 1:$ip handle $ip:0 sfq perturb 10 > > > #tx > > > #marking packets > > > iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.$siec.$ip -j > > > MARK --set-mark $ip > > > #tc > > > tc class add dev eth0 parent 2:1 classid 2:$ip htb rate $txmin$kbit ceil > > > $txmaxluser$kbit > > > #filtering by mark > > > tc filter add dev eth0 protocol ip preference 1 parent 2:0 handle $ip fw > > > flowid 2:$ip > > > tc qdisc add dev eth0 parent 2:$ip handle $ip:1 sfq perturb 10 > > > done > > > echo "" > > > > > > --------------------------------------------------------------------cut > > > here ------------------------------------------------------------------ > > > > > > > > > > > >_______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/