Hi, My workstation is connected to a LAN with two different gateways. GW1 is rate-limited to 2Mbps while GW2 is unlimited. Routing through GW1 is cheaper, thus I don''t want to be using only GW2. At any given time, I would like to be able to use GW1 while keeping it uncongestioned and to use GW2 for the remaining traffic. I know I can create a weighted multipath route but I believe the weight doesn''t allow me to specify the rate-limitation of GW1. Do you think I can come to a solution using iproute2, netfilter and tc? Regards, Benjamin _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/