Corey Rogers
2003-Jan-09 14:45 UTC
Shaping on multiple interfaces results in losing the box
Hi, I''m using the latest HTB patch on a custom 2.4.18 kernel. The kernels either include freeswan 1.98b or super-freeswan 1.99. When i attempt to shape on 1 interface .... no problem. I can do this to any interface on the linux box including. The minute I add the second set of shaping commands to another ethernet interface I lose the box. I normally set the box to reboot in a certain time when i''m running these scripts however the box does not reboot and is rendered unaccessible unless I''m on site. I also as a precaution allow the script to sleep for a period of time after which it clears the shaping from the interfaces ... it doesn''t take. I recently tried this in house on 2 test systems. However using kernel 2.4.20 with HTB etc enabled and installed super-freeswan 1.99 as packaged by Ken Bantoft. As with the machines I lost ... freeswan is not active. I atempted to shape 2 of the 4 interfaces on the machines ... IT WORKED. Problem is the machines in the field are currently live. I can''t bring them down until after hours or late on weekends. And I would have no one there to reset the systems. Any ideas as to why this is happening and or how to stop this? -- Corey Rogers <jrog@sunbeach.net> _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/