Hi again I am making all the test and probes i cann´t imagine but i begin to think it´s imposible to limit bandwidth by port. Anybody could put me a code example that makes this please? Thanks and regards David Coello _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
DOWNLINK=220
UPLINK=125
DEV=ppp0
tc qdisc add dev $DEV root handle 1: htb default 10
tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit burst 6
tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit \
ceil $[UPLINK}kbit burst 6k prio 1
tc class add dev $DEV parent 1:1 classid 1:20 htb rate $[3*$UPLINK/10]kbit\
ceil $[9*$UPLINK/10]kbit burst 6k prio 2
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10
tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \
match ip dport 8080 0xffff flowid 1:20
traffic to dport 80 will get 3/10 of bandwith (with possibility to
borrow up to 9/10)
andrea
David Coello wrote:> Hi again
>
> I am making all the test and probes i cann´t imagine but i begin to
> think it´s imposible to limit bandwidth by port. Anybody could put me a
> code example that makes this please?
>
> Thanks and regards
> David Coello
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
On Sat, 2002-12-14 at 03:57, Andrea Rossato wrote:> DOWNLINK=220 > UPLINK=125 > DEV=ppp0 > > tc qdisc add dev $DEV root handle 1: htb default 10 > > tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit burst 6 > > tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit \ > ceil $[UPLINK}kbit burst 6k prio 1 > > tc class add dev $DEV parent 1:1 classid 1:20 htb rate $[3*$UPLINK/10]kbit\ > ceil $[9*$UPLINK/10]kbit burst 6k prio 2 > > tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10 > tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10 > > tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \ > match ip dport 8080 0xffff flowid 1:20 > > > traffic to dport 80 will get 3/10 of bandwith (with possibility to > borrow up to 9/10) > andreaAndrea, I have another script (attached) Im just wondering how i could implement the above script into it. Im not the most knowledgable on shaping in general :) thanks -mdew (resent-again)