LARTC - Nov 2002 - tcng 9b tests error

I was trying out tcng and got the following error.  Any suggestions?

Additive headers at external interface (C): FAILED
  Standard error:
  | input in flex scanner failed
File:      tests/additive
Command:   LD_LIBRARY_PATH=.   tcsim -v -Xc,-tif:c
tests/lib/additive.tcsim |   sed ''/.* c .*returns /{s///;s/
(.*//;p;};d''
Input:     _in.15864
Output:    _out.15864
Reference: _ref.15864
scripts/runtests.sh: line 549: 15888 Broken pipe             cat
scripts/run-all-tests: line 14: 17625 Broken pipe             cat $n
make: *** [tests] Error 1

I also get an error with the following simple example:

[bauer@26-2-122 tcng]$ tcsim -ddd example.tcsim
0.000000: adding timer 360000.000000 (0x805f7f2)
--- TCC input ----------

# 1 "example.tc"
dev eth0 {
egress {
drop if tcp_sport != 80;
}
}


----------
--- TCC output ----------

# ================================ Device eth0
# ===============================
tc qdisc add dev eth0 handle 1:0 root dsmark indices 1 default_index 0
tc filter add dev eth0 parent 1:0 protocol all prio 1 handle 1:0:0 u32
divisor 1
tc filter add dev eth0 parent 1:0 protocol all prio 1 u32 match u8 0x6
0xff at 9 offset at 0 mask 0f00 shift 6 eat link 1:0:0
tc filter add dev eth0 parent 1:0 protocol all prio 1 handle 1:0:1 u32
ht 1:0:0 match u16 0x50 0xffff at 0 classid 1:0
tc filter add dev eth0 parent 1:0 protocol all prio 1 u32 match u8 0x6
0xff at 9 classid 1:0 police index 1 rate 1bps burst 1 action drop/drop
tc filter add dev eth0 parent 1:0 protocol all prio 1 u32 match u32 0 0
at 0 classid 1:0
----------
| dsmark_init(sch 0x80b8c80,[qdisc 0x80b8cdc],opt 0x80b8c68)
| dsmark_init: qdisc 0x80b8cdc
| dsmark_get(sch 0x80b8c80,[qdisc 0x80b8cdc],classid 10000)
| dsmark_get(sch 0x80b8c80,[qdisc 0x80b8cdc],classid 10000)
| dsmark_get(sch 0x80b8c80,[qdisc 0x80b8cdc],classid 10000)
0.000000 E : 0x80c0bc0 40 : eth0: 45000028 00000000 40060000 0a000001
0a000002 00500000 00000000 00000000 50000000 00000000
0.000000 D : 0x80c0bc0 40 : eth0: 45000028 00000000 40060000 0a000001
0a000002 00500000 00000000 00000000 50000000 00000000
0.000000: adding timer 0.000320 (0x805405a)
0.000000 E : 0x80c0ef8 40 : eth0: 45000028 00000000 40060000 0a000001
0a000002 00160000 00000000 00000000 50000000 00000000
0.000000 * : 0x80c0ef8 40 : eth0: enqueue returns POLICED (3)
input in flex scanner failed
[bauer@26-2-122 tcng]$

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

I want to see performance all qdisc in lartc howto,
beside using mrtg, there is another tool ? so just only
see "bytes" but another parameter.


      Best regards,    
>--<Kristiadi Himawan>--<
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

bauer@mit.edu wrote:
> I was trying out tcng and got the following error.  Any suggestions?
Yech, found it at last. I missed rtnl_close, which closen an
undefined file descriptor, which just happens to be zero on RH 7.3,
which in turn upsets flex. Will be fixed in version 9d.

Thanks,
- Werner

-- 
  _________________________________________________________________________
 / Werner Almesberger, Buenos Aires, Argentina         wa@almesberger.net /
/_http://www.almesberger.net/____________________________________________/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/