Hi all,
I''m managing a wireless network with around 70 sites in Ecuador, all
linux
routers and Lucent RG-1000/Aironet bridges.
I have 5 exits (5 diffent ISPs) in my network and I want to change the
static routing for dynamic routing with redundancy.
Because all 5 ISPs have their own clients I want to connect all clients to
their ISP using GRE tunnels (and in the future IPSEC) and internally do
dynamic routing between client and ISP.
But I run in a strange problem: When I use GRE tunnel with static routing
(with and without IP Masq), sending and recieving e-mail, pinging internet
and traceroute works OK, but surfing the web is extreemly slow (NOT
WORKING).
(below more information on setup, without tunnel everything is working OK)
I searched the internet but could not find any similar cases, what''s
happening? Is this a problem with MTU? GRE is 1476 the other interfaces
1500 or something else?
(we observed a strange effect, if we surf the web via a yahoo messenger it
does work!!!, but within IE it doesn''t)
Can I solve the dynamic routing with 5 exits (and for every client it''s
own
exit ) in another way?
(it''s important that very client enters/leaves through their ISP, only
my
internal network should be dynamic)
Ramon
-----------------------
Setup
---------
I''m using RedHat linux 7.3 kernel 2.4.9-31
client network (windows)
192.168.236.0/24
|
|
linux box
eth0 192.168.236.1
eth1 10.9.8.61
eth1 GRE tunnel to 10.8.8.1
|
|
wireless network
10.0.0.0/8 (3 linux hops, min 50 ms avg 150ms max 250ms)
|
|
linux box
eth1 10.8.8.1
eth1 GRE tunnel to 10.9.8.61
eth0 real IP 200.61.x.y using IP Masq for private net 192.168.0.0/16
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/