Hi,
if I known there is no problem with QoS on Synchronnous card. The devices
are hdlc0, hdlc1...
BUT frame-relay use own tools for QoS on provider side, it''s known as
signaling. You will have problem e.g. with latency because frame-relay have
own strategy with prioritization of traffic.
For more read www.frforum.com
On Fri, 9 Aug 2002 raptor@unacs.bg wrote:
> hi,
>
> I''m just evaluating to use Cyclades PC300 card instead of a Cisco
router...
> and ''cause I have never used such boards so I wanted to know will
I be
> able to do egress shaping on this board ?
> (It should be connected to the ISP with FrameRelay protocol (V35)) ...
> and as far as I can understand it will be seen in linux as hdslN device
> !! (not sure).
>
> So will I be able to work with it as a normal ethernet device ?!
>
> Sorry for the stupid question, but I have to be sure it will work
>
> thanx alot
> raptor
--
`)_|_('' PSIkappa
I k psi _at_ atlantis.sk
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/