On Tue, 29 Jan 2002, Julian Anastasov wrote:> You can try to recreate the route. The routes remember the
How do i recreate the route ? i re-run this script everytime the connection goes
up but it
only works the first time, when it redials it doesnt work anymore
ip rule add prio 201 from $eth0_network/24 table 201
ip route add default via $eth0gw dev eth0 src $ethoSRC proto static table 201
ip route append prohibit default table 201 metric 1 proto static
ip rule add prio 202 from $pppgw/32 table 202
ip route add default via $pppgw dev ppp0 src $pppSRC proto static table 202
ip route append prohibit default table 202 metric 1 proto static
ip rule add prio 222 table 222
ip route add default table 222 proto static nexthop via $eth0gw dev eth0 weight
1 nexthop via $pppgw dev ppp0 weight 11
On Tue, 29 Jan 2002, Julian Anastasov wrote:
>
> Hello,
>
> On Tue, 29 Jan 2002, mok2 wrote:
>
> > default proto static
> > nexthop via 260.74.283.1 dev eth0 weight 1
> > nexthop via 5.4.48.10 dev ppp0 weight 11
> >
> > it works fine but when the connection drops it puts the ppp0 gw as a
deadlink and when it redials it
> > still sees it as a dead link the only way i can make it work again is
to reboot..
> > how can i flush this dead link ?
>
> You can try to recreate the route. The routes remember the
> device by index, not by name and can not detect that the new
> device is a replacement for the previous one. The ifXXX name means
> the device is unregistered which is bad. Routes containing
> unregistered devices should be recreated.
>
> > When ppp0 drops
> > default proto static
> > nexthop via 250.74.283.1 dev eth0 weight 1
> > nexthop via 5.4.48.10 dev if40 weight 11 dead
> >
> > When it redials again
> > default proto static
> > nexthop via 260.74.283.1 dev eth0 weight 1
> > nexthop via 5.4.48.10 dev if40 weight 11 dead
> >
> > -regards mok2
>
> Regards
>
> --
> Julian Anastasov <ja@ssi.bg>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
>