LARTC - Oct 2001 - Multiple Internet Interfaces

Here is the setup I have. I have 3 network cards in my linux machine. 1
network card (eth0) goes to my internet network (192.168.0.0). Network Card
2 (eth1) and Network Card 3(eth2) go to the internet via 2 cable modems
whose address is determined by dhcp. I can get either cable modem to work
alone but I can''t get them to work together. I would really like to be
able
to combine the 2 into 1 and have it detect a bad link as well in case i have
to unplug 1 cable modem.

Thanks!
David
maniacdavid@cableone.net

As far as I know, the cable modems each share the same bandwidth.  They 
would also share the same subnet, so if one link goes down, wouldn''t 
they both be down?  I can''t see using more than 1 modem for each
coaxial
line.

Chris.

David wrote:
> Here is the setup I have. I have 3 network cards in my linux machine. 
> 1 network card (eth0) goes to my internet network (192.168.0.0). 
> Network Card 2 (eth1) and Network Card 3(eth2) go to the internet via 
> 2 cable modems whose address is determined by dhcp. I can get either 
> cable modem to work alone but I can''t get them to work together. I
> would really like to be able to combine the 2 into 1 and have it 
> detect a bad link as well in case i have to unplug 1 cable modem.
>
>  
>
> Thanks!
>
> David
> maniacdavid@cableone.net
>
>  
>