Theo Cabrerizo Diem
2001-Jun-28 20:52 UTC
RTNETLINK Problems <ip route> don''t work as expected. (I think)
Hi, I have one firewall with 3 ethernet cards, 2 internet links, one cisco 2920 and one problem in RTNETLINK ;o) Let me explain my network : | *** Internet Link 1 *** *** Internet Link 2 *** 10.1.0.1| Serial Serial | 10.2.0.1 |||| +--------------+ +------------+ | | || +------------+ 10.1.0.2| CISCO | 10.2.0.2 +------+-----+ 192.168.1.1 / 192.168.2.1 | eth2 192.168.1.2/ 192.168.2.1 +------------+ FIREWALL +-+--------+-+ 10.20.0.0 eth0| |eth1 10.30.0.0 | | MY DMZ NET MY CORPORATE NET I used reserved IPs for security reasons .. <sorry :o( > What I''m trying to do: I don''t want to use my cisco default route, because I will do some filtering, based on source address, at my firewall to choose wich link to use, so I must add (at my firewall) a default route using my ISP 1 end <10.1.0.1> at one routing table, and other default route using my ISP 2 end <10.2.0.1> at another routing table, and do trafic control using iptables/iproute <as described in Advanced Routing how-to>. the problem is ... RTNETLINK says Unreachable Network when I try to add a route, using a gateway wich isn''t directly connected to my firewall :o( this is the line I''m trying to use : <I know I''m not writing on a specific routing table to do traffic control> ip route add default via 10.1.0.1| RTNETLINK answers: Network is unreachable So .. I''ve tried ip route add default via 10.1.0.1 nexthop via 192.168.1.1 RTNETLINK answers: Invalid argument Can anyone help me ? If someone need more info, ask me ... <please reply me at theoc@spread.com.br but I will check this list every day ;o) > []''s
Ramin Alidousti
2001-Jun-28 23:51 UTC
Re: RTNETLINK Problems <ip route> don''t work as expected. (I think)
Do you have a route (no default) to that destination? It should work if you do. Ramin On Thu, Jun 28, 2001 at 05:52:33PM -0300, Theo Cabrerizo Diem wrote:> Hi, > > I have one firewall with 3 ethernet cards, 2 internet links, one cisco > 2920 and one problem in RTNETLINK ;o) > > Let me explain my network : > > | *** Internet Link 1 *** *** Internet Link > 2 *** > 10.1.0.1| Serial Serial | 10.2.0.1 > |||| +--------------+ +------------+ > > | | > || +------------+ > 10.1.0.2| CISCO | 10.2.0.2 > +------+-----+ > 192.168.1.1 / 192.168.2.1 > | > eth2 192.168.1.2/ 192.168.2.1 > +------------+ > FIREWALL > +-+--------+-+ > 10.20.0.0 eth0| |eth1 10.30.0.0 > | | > MY DMZ NET MY CORPORATE NET > > I used reserved IPs for security reasons .. <sorry :o( > > What I''m trying to do: > I don''t want to use my cisco default route, because I will do some > filtering, based on source address, at my firewall to choose wich link > to use, so I must add (at my firewall) a default route using my ISP 1 > end <10.1.0.1> at one routing table, and other default route using my > ISP 2 end <10.2.0.1> at another routing table, and do trafic control > using iptables/iproute <as described in Advanced Routing how-to>. > > the problem is ... RTNETLINK says Unreachable Network when I try to add > a route, using a gateway wich isn''t directly connected to my firewall > :o( this is the line I''m trying to use : > <I know I''m not writing on a specific routing table to do traffic control> > > ip route add default via 10.1.0.1| > RTNETLINK answers: Network is unreachable > > So .. I''ve tried > ip route add default via 10.1.0.1 nexthop via 192.168.1.1 > RTNETLINK answers: Invalid argument > > Can anyone help me ? If someone need more info, ask me ... <please > reply me at theoc@spread.com.br but I will check this list every day ;o) > > > []''s
Theo Cabrerizo Diem
2001-Jun-29 19:23 UTC
Re: RTNETLINK Problems <ip route> don''t work as expected. (I think)
Yes, I can ping 10.1.0.1. I tried from another box, <one connected to my corporate net> and without using any default route, I can add a route to 10.1.0.1 using my firewall as gateway (and my firewall with a route configured too), but I can''t use it as gateway to my default route ... :o/ <reply me at theoc@spread.com.br> Theo. Ramin Alidousti wrote:>Do you have a route (no default) to that destination? It should work >if you do. > >Ramin > >On Thu, Jun 28, 2001 at 05:52:33PM -0300, Theo Cabrerizo Diem wrote: > >>Hi, >> >>I have one firewall with 3 ethernet cards, 2 internet links, one cisco >>2920 and one problem in RTNETLINK ;o) >> >>Let me explain my network : >> >>| *** Internet Link 1 *** *** Internet Link >>2 *** >> 10.1.0.1| Serial Serial | 10.2.0.1 >>|||| +--------------+ +------------+ >> >> | | >>|| +------------+ >> 10.1.0.2| CISCO | 10.2.0.2 >> +------+-----+ >> 192.168.1.1 / 192.168.2.1 >> | >> eth2 192.168.1.2/ 192.168.2.1 >> +------------+ >> FIREWALL >> +-+--------+-+ >> 10.20.0.0 eth0| |eth1 10.30.0.0 >> | | >> MY DMZ NET MY CORPORATE NET >> >>I used reserved IPs for security reasons .. <sorry :o( > >>What I''m trying to do: >>I don''t want to use my cisco default route, because I will do some >>filtering, based on source address, at my firewall to choose wich link >>to use, so I must add (at my firewall) a default route using my ISP 1 >>end <10.1.0.1> at one routing table, and other default route using my >>ISP 2 end <10.2.0.1> at another routing table, and do trafic control >>using iptables/iproute <as described in Advanced Routing how-to>. >> >>the problem is ... RTNETLINK says Unreachable Network when I try to add >>a route, using a gateway wich isn''t directly connected to my firewall >>:o( this is the line I''m trying to use : >><I know I''m not writing on a specific routing table to do traffic control> >> >>ip route add default via 10.1.0.1| >>RTNETLINK answers: Network is unreachable >> >>So .. I''ve tried >>ip route add default via 10.1.0.1 nexthop via 192.168.1.1 >>RTNETLINK answers: Invalid argument >> >>Can anyone help me ? If someone need more info, ask me ... <please >>reply me at theoc@spread.com.br but I will check this list every day ;o) > >> >>[]''s >>