Solution :
- add CBQ root qdisc with bandwidth 100mbps
- add BOUNDED class with bandwidth 100mbps, rate 320kbps
- add CBQ qdisc with bandwidth 320kbps, rate 320Kbps
- add al the other classes to second qdisc
For LAN : I suggest to do the same.
Stef
Jaco van der Schyff wrote:>
> Greetings,
>
> I have a quick question as how to specify bandwith on my eth0 device.
>
> I have a cisco router connected to eth0, and the cisco router is
> connected to our ISP via a 320Kbps link.
>
> When I specify the bandwith in tc, do I specify it as 320Kbps (the
> bandwidth of the internet link) or as 100Mbps (the bandwidth
> available on eth0)
>
> And the same question as to the bandwidth on eth1 (link to lan).
> Should that also be 320kbps or 100mbps?
>
> Any help would be greatly appreciated.
>
>
> - Jaco van der Schyff
> jvds@netgroup.co.za
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/
--
Stef
More QOS info : http://users.belgacom.net/staf/