You''re missing queue disciplines for leaf classes. You should add:
tc qdisc add dev eth0 parent 10:100 tbf rate 1100Kbit \
   buffer 10Kb/8 limit 15Kb
tc qdisc add dev eth0 parent 10:10 tbf rate 900Kbit \
   buffer 10Kb/8 limit 15Kb
And you should set weight values to rate/10 approx. on all classes.
Maybe you should try cbq.init script from Pavel Golubev (you''ll find
the
ftp site address in the HOWTO).
-- 
                José Carlos Ramírez Pérez
                Área de Internet y Telecomunicaciones
                mailto:JoseCarlos.Ramirez@isotrol.com
                ___________________________________________________
                ISOTROL S.A.
                Avda. de la innovación nº 1, 3ª plta, 41020 Sevilla
                Tel.: 955 036 800 - Fax: 955 036 849
                web: http://www.isotrol.com/
Antonio Paulo Salgado Forster wrote:> 
> Hello,
> 
>      Could someone help me on this? I have the following configuration on
> on gateway:
> 
> 900Kbit/s for fw mark 2 (all traffic, except...) bounded
> 1100Kbit/s for fw mark 1 (mail and dns) bounded
> 
>      But I can see the I have almost no traffic on fw mark 2, even though
> the traffic on the output wan link is getting almost to 2Mbit/s.
> 
>      This is the configuration:
> 
> /usr/local/sbin/tc qdisc add dev eth0 root handle 10: cbq bandwidth 2Mbit
> avpkt 1000
> /usr/local/sbin/tc class add dev eth0 parent 10:0 classid 10:1 cbq
> bandwidth 2Mbit rate 2Mbit allot 1518 weight 50Kbit prio 8 maxburst 20
> avpkt 1000
> /usr/local/sbin/tc class add dev eth0 parent 10:1 classid 10:100 cbq
> bandwidth 2Mbit rate 1100Kbit allot 1518 weight 50Kbit prio 5 maxburst 20
> avpkt 1000 bounded
> /usr/local/sbin/tc class add dev eth0 parent 10:1 classid 10:10 cbq
> bandwidth 2Mbit rate 900Kbit allot 1518 weight 50Kbit prio 5 maxburst 20
> avpkt 1000  bounded
> /usr/local/sbin/tc filter add dev eth0 protocol ip parent 10:0 prio 100
> handle 1 fw flowid 10:100
> /usr/local/sbin/tc filter add dev eth0 protocol ip parent 10:0 prio 10
> handle 2 fw flowid 10:10
> 
> Am I missing something here?
> 
> I would appreciate any help. Thanks!
> 
> Forster
> 
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/