Patrick van der Velde
2009-May-08 23:00 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
Hi All I was wondering if it was possible to run rake (or irake) on the latest binary release of IronRuby. I''ve searched the mailing list but all posts relating to rake are several months old and are not related to the binary releases :( I''ve tried to run irake but I''m getting NotImplementedExceptions when I run it. If anybody has suggestions that would be greatly appreciated. Thanks Patrick
Jimmy Schementi
2009-May-09 01:35 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
It definitely works for me, as I can do things like irake db:migrate, but this is out of my fork''s railsconf branch; I''ll be making sure the main repo has all the necessary fixed to run rake and rails without any major workarounds. ~Jimmy Sent from my phone On May 8, 2009, at 4:00 PM, "Patrick van der Velde" <petrikvandervelde at gmail.com > wrote:> Hi All > > I was wondering if it was possible to run rake (or irake) on the > latest binary release of IronRuby. I''ve searched the mailing list but > all posts relating to rake are several months old and are not related > to the binary releases :( I''ve tried to run irake but I''m getting > NotImplementedExceptions when I run it. If anybody has suggestions > that would be greatly appreciated. > > Thanks > > Patrick > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core >
Patrick van der Velde
2009-May-10 00:11 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
Hiya Mmm ok I''m a little confused here. So irake does work but possibly not on the latest binary release? Also does irake need rake under the covers or should it just be able to run rake files without any link to Ruby. I haven''t got Ruby installed on my machine (but I do have ironruby). Also do I need to set any paths etc? Sorry about all the stupid questions but I''m very new to ironruby (and ruby actually) so I''m not sure where to search for the solution to my problem. Thanks Patrick On Sat, May 9, 2009 at 13:35, Jimmy Schementi <Jimmy.Schementi at microsoft.com> wrote:> It definitely works for me, as I can do things like irake db:migrate, > but this is out of my fork''s railsconf branch; I''ll be making sure the > main repo has all the necessary fixed to run rake and rails without > any major workarounds. > > ~Jimmy > Sent from my phone > > On May 8, 2009, at 4:00 PM, "Patrick van der Velde" <petrikvandervelde at gmail.com > ?> wrote: > >> Hi All >> >> I was wondering if it was possible to run rake (or irake) on the >> latest binary release of IronRuby. I''ve searched the mailing list but >> all posts relating to rake are several months old and are not related >> to the binary releases :( I''ve tried to run irake but I''m getting >> NotImplementedExceptions when I run it. If anybody has suggestions >> that would be greatly appreciated. >> >> Thanks >> >> Patrick >> _______________________________________________ >> Ironruby-core mailing list >> Ironruby-core at rubyforge.org >> http://rubyforge.org/mailman/listinfo/ironruby-core >> > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core >
Ivan Porto Carrero
2009-May-10 06:34 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
Hi Patrick You will need the rake gem to be installed in IronRuby for the irake command to work. You can do that with the igem command igem install rake I assume you''re using windows because the igem command is broken again on mono. --- Met vriendelijke groeten - Best regards - Salutations Ivan Porto Carrero Blog: http://flanders.co.nz Twitter: http://twitter.com/casualjim Author of IronRuby in Action (http://manning.com/carrero) Charles Kuralt<http://www.brainyquote.com/quotes/authors/c/charles_kuralt.html> - "You can find your way across this country using burger joints the way a navigator uses stars." On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde < petrikvandervelde at gmail.com> wrote:> Hiya > > Mmm ok I''m a little confused here. So irake does work but possibly not > on the latest binary release? Also does irake need rake under the > covers or should it just be able to run rake files without any link to > Ruby. I haven''t got Ruby installed on my machine (but I do have > ironruby). Also do I need to set any paths etc? > Sorry about all the stupid questions but I''m very new to ironruby (and > ruby actually) so I''m not sure where to search for the solution to my > problem. > > Thanks > > Patrick > > On Sat, May 9, 2009 at 13:35, Jimmy Schementi > <Jimmy.Schementi at microsoft.com> wrote: > > It definitely works for me, as I can do things like irake db:migrate, > > but this is out of my fork''s railsconf branch; I''ll be making sure the > > main repo has all the necessary fixed to run rake and rails without > > any major workarounds. > > > > ~Jimmy > > Sent from my phone > > > > On May 8, 2009, at 4:00 PM, "Patrick van der Velde" < > petrikvandervelde at gmail.com > > > wrote: > > > >> Hi All > >> > >> I was wondering if it was possible to run rake (or irake) on the > >> latest binary release of IronRuby. I''ve searched the mailing list but > >> all posts relating to rake are several months old and are not related > >> to the binary releases :( I''ve tried to run irake but I''m getting > >> NotImplementedExceptions when I run it. If anybody has suggestions > >> that would be greatly appreciated. > >> > >> Thanks > >> > >> Patrick > >> _______________________________________________ > >> Ironruby-core mailing list > >> Ironruby-core at rubyforge.org > >> http://rubyforge.org/mailman/listinfo/ironruby-core > >> > > _______________________________________________ > > Ironruby-core mailing list > > Ironruby-core at rubyforge.org > > http://rubyforge.org/mailman/listinfo/ironruby-core > > > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://rubyforge.org/pipermail/ironruby-core/attachments/20090510/57417c80/attachment.html>
Patrick van der Velde
2009-May-10 06:53 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
Hiya
Ok so I installed rake and got:
C:\languages\ironruby\bin>igem install rake
Successfully installed rake-0.8.5
1 gem installed
Installing ri documentation for rake-0.8.5...
Invalid output formatter
For help on options, try ''rdoc --help''
Then I assume that not having the documentation is not a problem so I
try to run irake but get:
C:\languages\ironruby\bin>irake
:0:in `to_proc'': The method or operation is not implemented.
(System::NotImplementedException)
from alt_system.rb:0
from :0:in `require''
from custom_require.rb:26:in `require''
from win32.rb:0
from :0:in `require''
from custom_require.rb:26:in `require''
from rake.rb:0
from :0:in `require''
from custom_require.rb:26:in `require''
from rake:0
from :0:in `load''
from irake:0
Any ideas on this one? Am I missing more gems?
Oh and yes I''m on a Windows machine :)
Thanks
Patrick
On Sun, May 10, 2009 at 18:34, Ivan Porto Carrero <ivan at flanders.co.nz>
wrote:> Hi Patrick
> You will need the rake gem to be installed in IronRuby for the irake
command
> to work.
> You can do that with the igem command
> igem install rake
> I assume you''re using windows because the igem command is broken
again on
> mono.
> ---
> Met vriendelijke groeten - Best regards - Salutations
> Ivan Porto Carrero
> Blog: http://flanders.co.nz
> Twitter: http://twitter.com/casualjim
> Author of IronRuby in Action (http://manning.com/carrero)
>
> Charles Kuralt ?- "You can find your way across this country using
burger
> joints the way a navigator uses stars."
>
> On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde
> <petrikvandervelde at gmail.com> wrote:
>>
>> Hiya
>>
>> Mmm ok I''m a little confused here. So irake does work but
possibly not
>> on the latest binary release? Also does irake need rake under the
>> covers or should it just be able to run rake files without any link to
>> Ruby. I haven''t got Ruby installed on my machine (but I do
have
>> ironruby). Also do I need to set any paths etc?
>> Sorry about all the stupid questions but I''m very new to
ironruby (and
>> ruby actually) so I''m not sure where to search for the
solution to my
>> problem.
>>
>> Thanks
>>
>> Patrick
>>
>> On Sat, May 9, 2009 at 13:35, Jimmy Schementi
>> <Jimmy.Schementi at microsoft.com> wrote:
>> > It definitely works for me, as I can do things like irake
db:migrate,
>> > but this is out of my fork''s railsconf branch;
I''ll be making sure the
>> > main repo has all the necessary fixed to run rake and rails
without
>> > any major workarounds.
>> >
>> > ~Jimmy
>> > Sent from my phone
>> >
>> > On May 8, 2009, at 4:00 PM, "Patrick van der Velde"
>> > <petrikvandervelde at gmail.com
>> > ?> wrote:
>> >
>> >> Hi All
>> >>
>> >> I was wondering if it was possible to run rake (or irake) on
the
>> >> latest binary release of IronRuby. I''ve searched the
mailing list but
>> >> all posts relating to rake are several months old and are not
related
>> >> to the binary releases :( I''ve tried to run irake but
I''m getting
>> >> NotImplementedExceptions when I run it. If anybody has
suggestions
>> >> that would be greatly appreciated.
>> >>
>> >> Thanks
>> >>
>> >> Patrick
>> >> _______________________________________________
>> >> Ironruby-core mailing list
>> >> Ironruby-core at rubyforge.org
>> >> http://rubyforge.org/mailman/listinfo/ironruby-core
>> >>
>> > _______________________________________________
>> > Ironruby-core mailing list
>> > Ironruby-core at rubyforge.org
>> > http://rubyforge.org/mailman/listinfo/ironruby-core
>> >
>> _______________________________________________
>> Ironruby-core mailing list
>> Ironruby-core at rubyforge.org
>> http://rubyforge.org/mailman/listinfo/ironruby-core
>
>
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org
> http://rubyforge.org/mailman/listinfo/ironruby-core
>
>
Jim Deville
2009-May-10 08:10 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
The next time I push, that should be fixed. Tomas just implemented
Method#to_proc last week.
JD
....there is no try
Sent from my phone. Please excuse typos and txtspk.
-----Original Message-----
From: Patrick van der Velde <petrikvandervelde at gmail.com>
Sent: May 09, 2009 11:54 PM
To: ironruby-core at rubyforge.org <ironruby-core at rubyforge.org>
Subject: Re: [Ironruby-core] Is it possible to run rake on the latest binary
release of IronRuby?
Hiya
Ok so I installed rake and got:
C:\languages\ironruby\bin>igem install rake
Successfully installed rake-0.8.5
1 gem installed
Installing ri documentation for rake-0.8.5...
Invalid output formatter
For help on options, try ''rdoc --help''
Then I assume that not having the documentation is not a problem so I
try to run irake but get:
C:\languages\ironruby\bin>irake
:0:in `to_proc'': The method or operation is not implemented.
(System::NotImplementedException)
from alt_system.rb:0
from :0:in `require''
from custom_require.rb:26:in `require''
from win32.rb:0
from :0:in `require''
from custom_require.rb:26:in `require''
from rake.rb:0
from :0:in `require''
from custom_require.rb:26:in `require''
from rake:0
from :0:in `load''
from irake:0
Any ideas on this one? Am I missing more gems?
Oh and yes I''m on a Windows machine :)
Thanks
Patrick
On Sun, May 10, 2009 at 18:34, Ivan Porto Carrero <ivan at flanders.co.nz>
wrote:> Hi Patrick
> You will need the rake gem to be installed in IronRuby for the irake
command
> to work.
> You can do that with the igem command
> igem install rake
> I assume you''re using windows because the igem command is broken
again on
> mono.
> ---
> Met vriendelijke groeten - Best regards - Salutations
> Ivan Porto Carrero
> Blog: http://flanders.co.nz
> Twitter: http://twitter.com/casualjim
> Author of IronRuby in Action (http://manning.com/carrero)
>
> Charles Kuralt - "You can find your way across this country using
burger
> joints the way a navigator uses stars."
>
> On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde
> <petrikvandervelde at gmail.com> wrote:
>>
>> Hiya
>>
>> Mmm ok I''m a little confused here. So irake does work but
possibly not
>> on the latest binary release? Also does irake need rake under the
>> covers or should it just be able to run rake files without any link to
>> Ruby. I haven''t got Ruby installed on my machine (but I do
have
>> ironruby). Also do I need to set any paths etc?
>> Sorry about all the stupid questions but I''m very new to
ironruby (and
>> ruby actually) so I''m not sure where to search for the
solution to my
>> problem.
>>
>> Thanks
>>
>> Patrick
>>
>> On Sat, May 9, 2009 at 13:35, Jimmy Schementi
>> <Jimmy.Schementi at microsoft.com> wrote:
>> > It definitely works for me, as I can do things like irake
db:migrate,
>> > but this is out of my fork''s railsconf branch;
I''ll be making sure the
>> > main repo has all the necessary fixed to run rake and rails
without
>> > any major workarounds.
>> >
>> > ~Jimmy
>> > Sent from my phone
>> >
>> > On May 8, 2009, at 4:00 PM, "Patrick van der Velde"
>> > <petrikvandervelde at gmail.com
>> > > wrote:
>> >
>> >> Hi All
>> >>
>> >> I was wondering if it was possible to run rake (or irake) on
the
>> >> latest binary release of IronRuby. I''ve searched the
mailing list but
>> >> all posts relating to rake are several months old and are not
related
>> >> to the binary releases :( I''ve tried to run irake but
I''m getting
>> >> NotImplementedExceptions when I run it. If anybody has
suggestions
>> >> that would be greatly appreciated.
>> >>
>> >> Thanks
>> >>
>> >> Patrick
>> >> _______________________________________________
>> >> Ironruby-core mailing list
>> >> Ironruby-core at rubyforge.org
>> >> http://rubyforge.org/mailman/listinfo/ironruby-core
>> >>
>> > _______________________________________________
>> > Ironruby-core mailing list
>> > Ironruby-core at rubyforge.org
>> > http://rubyforge.org/mailman/listinfo/ironruby-core
>> >
>> _______________________________________________
>> Ironruby-core mailing list
>> Ironruby-core at rubyforge.org
>> http://rubyforge.org/mailman/listinfo/ironruby-core
>
>
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org
> http://rubyforge.org/mailman/listinfo/ironruby-core
>
>
_______________________________________________
Ironruby-core mailing list
Ironruby-core at rubyforge.org
http://rubyforge.org/mailman/listinfo/ironruby-core
Patrick van der Velde
2009-May-10 21:13 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
Hi Jim Cool! I''ll be waiting for that one then :) Any idea when you''ll push it into the trunk? Also do you know if there is a guide for building IronRuby from scratch so that I can build it and get the fix? Thanks Patrick On Sun, May 10, 2009 at 20:10, Jim Deville <jdeville at microsoft.com> wrote:> The next time I push, that should be fixed. Tomas just implemented Method#to_proc last week. > > JD > > ....there is no try > Sent from my phone. Please excuse typos and txtspk. > > -----Original Message----- > From: Patrick van der Velde <petrikvandervelde at gmail.com> > Sent: May 09, 2009 11:54 PM > To: ironruby-core at rubyforge.org <ironruby-core at rubyforge.org> > Subject: Re: [Ironruby-core] Is it possible to run rake on the latest binary ? ?release of IronRuby? > > > Hiya > > Ok so I installed rake and got: > > C:\languages\ironruby\bin>igem install rake > Successfully installed rake-0.8.5 > 1 gem installed > Installing ri documentation for rake-0.8.5... > > Invalid output formatter > > For help on options, try ''rdoc --help'' > > Then I assume that not having the documentation is not a problem so I > try to run irake but get: > > C:\languages\ironruby\bin>irake > :0:in `to_proc'': The method or operation is not implemented. > (System::NotImplementedException) > ? ? ? ?from alt_system.rb:0 > ? ? ? ?from :0:in `require'' > ? ? ? ?from custom_require.rb:26:in `require'' > ? ? ? ?from win32.rb:0 > ? ? ? ?from :0:in `require'' > ? ? ? ?from custom_require.rb:26:in `require'' > ? ? ? ?from rake.rb:0 > ? ? ? ?from :0:in `require'' > ? ? ? ?from custom_require.rb:26:in `require'' > ? ? ? ?from rake:0 > ? ? ? ?from :0:in `load'' > ? ? ? ?from irake:0 > > Any ideas on this one? Am I missing more gems? > > Oh and yes I''m on a Windows machine :) > > Thanks > > Patrick > > > On Sun, May 10, 2009 at 18:34, Ivan Porto Carrero <ivan at flanders.co.nz> wrote: >> Hi Patrick >> You will need the rake gem to be installed in IronRuby for the irake command >> to work. >> You can do that with the igem command >> igem install rake >> I assume you''re using windows because the igem command is broken again on >> mono. >> --- >> Met vriendelijke groeten - Best regards - Salutations >> Ivan Porto Carrero >> Blog: http://flanders.co.nz >> Twitter: http://twitter.com/casualjim >> Author of IronRuby in Action (http://manning.com/carrero) >> >> Charles Kuralt ?- "You can find your way across this country using burger >> joints the way a navigator uses stars." >> >> On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde >> <petrikvandervelde at gmail.com> wrote: >>> >>> Hiya >>> >>> Mmm ok I''m a little confused here. So irake does work but possibly not >>> on the latest binary release? Also does irake need rake under the >>> covers or should it just be able to run rake files without any link to >>> Ruby. I haven''t got Ruby installed on my machine (but I do have >>> ironruby). Also do I need to set any paths etc? >>> Sorry about all the stupid questions but I''m very new to ironruby (and >>> ruby actually) so I''m not sure where to search for the solution to my >>> problem. >>> >>> Thanks >>> >>> Patrick >>> >>> On Sat, May 9, 2009 at 13:35, Jimmy Schementi >>> <Jimmy.Schementi at microsoft.com> wrote: >>> > It definitely works for me, as I can do things like irake db:migrate, >>> > but this is out of my fork''s railsconf branch; I''ll be making sure the >>> > main repo has all the necessary fixed to run rake and rails without >>> > any major workarounds. >>> > >>> > ~Jimmy >>> > Sent from my phone >>> > >>> > On May 8, 2009, at 4:00 PM, "Patrick van der Velde" >>> > <petrikvandervelde at gmail.com >>> > ?> wrote: >>> > >>> >> Hi All >>> >> >>> >> I was wondering if it was possible to run rake (or irake) on the >>> >> latest binary release of IronRuby. I''ve searched the mailing list but >>> >> all posts relating to rake are several months old and are not related >>> >> to the binary releases :( I''ve tried to run irake but I''m getting >>> >> NotImplementedExceptions when I run it. If anybody has suggestions >>> >> that would be greatly appreciated. >>> >> >>> >> Thanks >>> >> >>> >> Patrick >>> >> _______________________________________________ >>> >> Ironruby-core mailing list >>> >> Ironruby-core at rubyforge.org >>> >> http://rubyforge.org/mailman/listinfo/ironruby-core >>> >> >>> > _______________________________________________ >>> > Ironruby-core mailing list >>> > Ironruby-core at rubyforge.org >>> > http://rubyforge.org/mailman/listinfo/ironruby-core >>> > >>> _______________________________________________ >>> Ironruby-core mailing list >>> Ironruby-core at rubyforge.org >>> http://rubyforge.org/mailman/listinfo/ironruby-core >> >> >> _______________________________________________ >> Ironruby-core mailing list >> Ironruby-core at rubyforge.org >> http://rubyforge.org/mailman/listinfo/ironruby-core >> >> > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core > > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core >
Jim Deville
2009-May-10 21:20 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
Pushed it a little while ago. To build, follow the instructions here: http://wiki.github.com/ironruby/ironruby/getting-the-sources to get sources, then here: http://wiki.github.com/ironruby/ironruby/building to build. If you want to contribute back to the project, you can follow the instructions here: http://wiki.github.com/ironruby/ironruby/contributing Hope that helps, feel free to ask if you need help. JD ...there is no try> -----Original Message----- > From: ironruby-core-bounces at rubyforge.org [mailto:ironruby-core- > bounces at rubyforge.org] On Behalf Of Patrick van der Velde > Sent: Sunday, May 10, 2009 2:13 PM > To: ironruby-core at rubyforge.org > Subject: Re: [Ironruby-core] Is it possible to run rake on the latest binary > release of IronRuby? > > Hi Jim > > Cool! I''ll be waiting for that one then :) Any idea when you''ll push it into the > trunk? Also do you know if there is a guide for building IronRuby from scratch > so that I can build it and get the fix? > > Thanks > > Patrick > > On Sun, May 10, 2009 at 20:10, Jim Deville <jdeville at microsoft.com> wrote: > > The next time I push, that should be fixed. Tomas just implemented > Method#to_proc last week. > > > > JD > > > > ....there is no try > > Sent from my phone. Please excuse typos and txtspk. > > > > -----Original Message----- > > From: Patrick van der Velde <petrikvandervelde at gmail.com> > > Sent: May 09, 2009 11:54 PM > > To: ironruby-core at rubyforge.org <ironruby-core at rubyforge.org> > > Subject: Re: [Ironruby-core] Is it possible to run rake on the latest binary > release of IronRuby? > > > > > > Hiya > > > > Ok so I installed rake and got: > > > > C:\languages\ironruby\bin>igem install rake Successfully installed > > rake-0.8.5 > > 1 gem installed > > Installing ri documentation for rake-0.8.5... > > > > Invalid output formatter > > > > For help on options, try ''rdoc --help'' > > > > Then I assume that not having the documentation is not a problem so I > > try to run irake but get: > > > > C:\languages\ironruby\bin>irake > > :0:in `to_proc'': The method or operation is not implemented. > > (System::NotImplementedException) > > from alt_system.rb:0 > > from :0:in `require'' > > from custom_require.rb:26:in `require'' > > from win32.rb:0 > > from :0:in `require'' > > from custom_require.rb:26:in `require'' > > from rake.rb:0 > > from :0:in `require'' > > from custom_require.rb:26:in `require'' > > from rake:0 > > from :0:in `load'' > > from irake:0 > > > > Any ideas on this one? Am I missing more gems? > > > > Oh and yes I''m on a Windows machine :) > > > > Thanks > > > > Patrick > > > > > > On Sun, May 10, 2009 at 18:34, Ivan Porto Carrero <ivan at flanders.co.nz> > wrote: > >> Hi Patrick > >> You will need the rake gem to be installed in IronRuby for the irake > >> command to work. > >> You can do that with the igem command igem install rake I assume > >> you''re using windows because the igem command is broken again on > >> mono. > >> --- > >> Met vriendelijke groeten - Best regards - Salutations Ivan Porto > >> Carrero > >> Blog: http://flanders.co.nz > >> Twitter: http://twitter.com/casualjim Author of IronRuby in Action > >> (http://manning.com/carrero) > >> > >> Charles Kuralt - "You can find your way across this country using > >> burger joints the way a navigator uses stars." > >> > >> On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde > >> <petrikvandervelde at gmail.com> wrote: > >>> > >>> Hiya > >>> > >>> Mmm ok I''m a little confused here. So irake does work but possibly > >>> not on the latest binary release? Also does irake need rake under > >>> the covers or should it just be able to run rake files without any > >>> link to Ruby. I haven''t got Ruby installed on my machine (but I do > >>> have ironruby). Also do I need to set any paths etc? > >>> Sorry about all the stupid questions but I''m very new to ironruby > >>> (and ruby actually) so I''m not sure where to search for the solution > >>> to my problem. > >>> > >>> Thanks > >>> > >>> Patrick > >>> > >>> On Sat, May 9, 2009 at 13:35, Jimmy Schementi > >>> <Jimmy.Schementi at microsoft.com> wrote: > >>> > It definitely works for me, as I can do things like irake > >>> > db:migrate, but this is out of my fork''s railsconf branch; I''ll be > >>> > making sure the main repo has all the necessary fixed to run rake > >>> > and rails without any major workarounds. > >>> > > >>> > ~Jimmy > >>> > Sent from my phone > >>> > > >>> > On May 8, 2009, at 4:00 PM, "Patrick van der Velde" > >>> > <petrikvandervelde at gmail.com > >>> > > wrote: > >>> > > >>> >> Hi All > >>> >> > >>> >> I was wondering if it was possible to run rake (or irake) on the > >>> >> latest binary release of IronRuby. I''ve searched the mailing list > >>> >> but all posts relating to rake are several months old and are not > >>> >> related to the binary releases :( I''ve tried to run irake but I''m > >>> >> getting NotImplementedExceptions when I run it. If anybody has > >>> >> suggestions that would be greatly appreciated. > >>> >> > >>> >> Thanks > >>> >> > >>> >> Patrick > >>> >> _______________________________________________ > >>> >> Ironruby-core mailing list > >>> >> Ironruby-core at rubyforge.org > >>> >> http://rubyforge.org/mailman/listinfo/ironruby-core > >>> >> > >>> > _______________________________________________ > >>> > Ironruby-core mailing list > >>> > Ironruby-core at rubyforge.org > >>> > http://rubyforge.org/mailman/listinfo/ironruby-core > >>> > > >>> _______________________________________________ > >>> Ironruby-core mailing list > >>> Ironruby-core at rubyforge.org > >>> http://rubyforge.org/mailman/listinfo/ironruby-core > >> > >> > >> _______________________________________________ > >> Ironruby-core mailing list > >> Ironruby-core at rubyforge.org > >> http://rubyforge.org/mailman/listinfo/ironruby-core > >> > >> > > _______________________________________________ > > Ironruby-core mailing list > > Ironruby-core at rubyforge.org > > http://rubyforge.org/mailman/listinfo/ironruby-core > > > > _______________________________________________ > > Ironruby-core mailing list > > Ironruby-core at rubyforge.org > > http://rubyforge.org/mailman/listinfo/ironruby-core > > > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core
Patrick van der Velde
2009-May-10 22:03 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
Hi Jim
Thanks for that. I grabbed the sources from GitHub. For now I just
grabbed a zip file as I just want to play around with IronRuby.
I followed the instructions on the website and managed to build the
solution (using VS2008) just fine. No errors / warnings etc. I then
copied all the binaries into another folder. I also copied the cmd
files from the 0.3 release into that folder. I then tried to run irake
but got another error:
C:\languages\ironruby\bin>irake
:0:in `require'': no such file to load -- rubygems (LoadError)
from C:/languages/ironruby/bin/irake:9
And when I try to run igem to install rake I get:
C:\languages\ironruby\bin>igem install rake
:0:in `require'': no such file to load -- rubygems (LoadError)
from C:/languages/ironruby/bin/igem:8
So any idea where I went wrong? I think I did all the steps in the
right order but given that it''s not working I guess I didn''t
entirely
get it right :(
Thanks heaps for all your help
Patrick
On Mon, May 11, 2009 at 09:20, Jim Deville <jdeville at microsoft.com>
wrote:> Pushed it a little while ago. ?To build, follow the instructions here:
http://wiki.github.com/ironruby/ironruby/getting-the-sources to get sources,
then here: http://wiki.github.com/ironruby/ironruby/building to build. If you
want to contribute back to the project, you can follow the instructions here:
http://wiki.github.com/ironruby/ironruby/contributing
>
> Hope that helps, feel free to ask if you need help.
>
> JD
>
> ...there is no try
>
>
>> -----Original Message-----
>> From: ironruby-core-bounces at rubyforge.org [mailto:ironruby-core-
>> bounces at rubyforge.org] On Behalf Of Patrick van der Velde
>> Sent: Sunday, May 10, 2009 2:13 PM
>> To: ironruby-core at rubyforge.org
>> Subject: Re: [Ironruby-core] Is it possible to run rake on the latest
binary
>> release of IronRuby?
>>
>> Hi Jim
>>
>> Cool! I''ll be waiting for that one then :) Any idea when
you''ll push it into the
>> trunk? Also do you know if there is a guide for building IronRuby from
scratch
>> so that I can build it and get the fix?
>>
>> Thanks
>>
>> Patrick
>>
>> On Sun, May 10, 2009 at 20:10, Jim Deville <jdeville at
microsoft.com> wrote:
>> > The next time I push, that should be fixed. Tomas just implemented
>> Method#to_proc last week.
>> >
>> > JD
>> >
>> > ....there is no try
>> > Sent from my phone. Please excuse typos and txtspk.
>> >
>> > -----Original Message-----
>> > From: Patrick van der Velde <petrikvandervelde at gmail.com>
>> > Sent: May 09, 2009 11:54 PM
>> > To: ironruby-core at rubyforge.org <ironruby-core at
rubyforge.org>
>> > Subject: Re: [Ironruby-core] Is it possible to run rake on the
latest binary
>> release of IronRuby?
>> >
>> >
>> > Hiya
>> >
>> > Ok so I installed rake and got:
>> >
>> > C:\languages\ironruby\bin>igem install rake Successfully
installed
>> > rake-0.8.5
>> > 1 gem installed
>> > Installing ri documentation for rake-0.8.5...
>> >
>> > Invalid output formatter
>> >
>> > For help on options, try ''rdoc --help''
>> >
>> > Then I assume that not having the documentation is not a problem
so I
>> > try to run irake but get:
>> >
>> > C:\languages\ironruby\bin>irake
>> > :0:in `to_proc'': The method or operation is not
implemented.
>> > (System::NotImplementedException)
>> > ? ? ? ?from alt_system.rb:0
>> > ? ? ? ?from :0:in `require''
>> > ? ? ? ?from custom_require.rb:26:in `require''
>> > ? ? ? ?from win32.rb:0
>> > ? ? ? ?from :0:in `require''
>> > ? ? ? ?from custom_require.rb:26:in `require''
>> > ? ? ? ?from rake.rb:0
>> > ? ? ? ?from :0:in `require''
>> > ? ? ? ?from custom_require.rb:26:in `require''
>> > ? ? ? ?from rake:0
>> > ? ? ? ?from :0:in `load''
>> > ? ? ? ?from irake:0
>> >
>> > Any ideas on this one? Am I missing more gems?
>> >
>> > Oh and yes I''m on a Windows machine :)
>> >
>> > Thanks
>> >
>> > Patrick
>> >
>> >
>> > On Sun, May 10, 2009 at 18:34, Ivan Porto Carrero <ivan at
flanders.co.nz>
>> wrote:
>> >> Hi Patrick
>> >> You will need the rake gem to be installed in IronRuby for the
irake
>> >> command to work.
>> >> You can do that with the igem command igem install rake I
assume
>> >> you''re using windows because the igem command is
broken again on
>> >> mono.
>> >> ---
>> >> Met vriendelijke groeten - Best regards - Salutations Ivan
Porto
>> >> Carrero
>> >> Blog: http://flanders.co.nz
>> >> Twitter: http://twitter.com/casualjim Author of IronRuby in
Action
>> >> (http://manning.com/carrero)
>> >>
>> >> Charles Kuralt ?- "You can find your way across this
country using
>> >> burger joints the way a navigator uses stars."
>> >>
>> >> On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde
>> >> <petrikvandervelde at gmail.com> wrote:
>> >>>
>> >>> Hiya
>> >>>
>> >>> Mmm ok I''m a little confused here. So irake does
work but possibly
>> >>> not on the latest binary release? Also does irake need
rake under
>> >>> the covers or should it just be able to run rake files
without any
>> >>> link to Ruby. I haven''t got Ruby installed on my
machine (but I do
>> >>> have ironruby). Also do I need to set any paths etc?
>> >>> Sorry about all the stupid questions but I''m very
new to ironruby
>> >>> (and ruby actually) so I''m not sure where to
search for the solution
>> >>> to my problem.
>> >>>
>> >>> Thanks
>> >>>
>> >>> Patrick
>> >>>
>> >>> On Sat, May 9, 2009 at 13:35, Jimmy Schementi
>> >>> <Jimmy.Schementi at microsoft.com> wrote:
>> >>> > It definitely works for me, as I can do things like
irake
>> >>> > db:migrate, but this is out of my fork''s
railsconf branch; I''ll be
>> >>> > making sure the main repo has all the necessary fixed
to run rake
>> >>> > and rails without any major workarounds.
>> >>> >
>> >>> > ~Jimmy
>> >>> > Sent from my phone
>> >>> >
>> >>> > On May 8, 2009, at 4:00 PM, "Patrick van der
Velde"
>> >>> > <petrikvandervelde at gmail.com
>> >>> > ?> wrote:
>> >>> >
>> >>> >> Hi All
>> >>> >>
>> >>> >> I was wondering if it was possible to run rake
(or irake) on the
>> >>> >> latest binary release of IronRuby. I''ve
searched the mailing list
>> >>> >> but all posts relating to rake are several months
old and are not
>> >>> >> related to the binary releases :( I''ve
tried to run irake but I''m
>> >>> >> getting NotImplementedExceptions when I run it.
If anybody has
>> >>> >> suggestions that would be greatly appreciated.
>> >>> >>
>> >>> >> Thanks
>> >>> >>
>> >>> >> Patrick
>> >>> >> _______________________________________________
>> >>> >> Ironruby-core mailing list
>> >>> >> Ironruby-core at rubyforge.org
>> >>> >>
http://rubyforge.org/mailman/listinfo/ironruby-core
>> >>> >>
>> >>> > _______________________________________________
>> >>> > Ironruby-core mailing list
>> >>> > Ironruby-core at rubyforge.org
>> >>> > http://rubyforge.org/mailman/listinfo/ironruby-core
>> >>> >
>> >>> _______________________________________________
>> >>> Ironruby-core mailing list
>> >>> Ironruby-core at rubyforge.org
>> >>> http://rubyforge.org/mailman/listinfo/ironruby-core
>> >>
>> >>
>> >> _______________________________________________
>> >> Ironruby-core mailing list
>> >> Ironruby-core at rubyforge.org
>> >> http://rubyforge.org/mailman/listinfo/ironruby-core
>> >>
>> >>
>> > _______________________________________________
>> > Ironruby-core mailing list
>> > Ironruby-core at rubyforge.org
>> > http://rubyforge.org/mailman/listinfo/ironruby-core
>> >
>> > _______________________________________________
>> > Ironruby-core mailing list
>> > Ironruby-core at rubyforge.org
>> > http://rubyforge.org/mailman/listinfo/ironruby-core
>> >
>> _______________________________________________
>> Ironruby-core mailing list
>> Ironruby-core at rubyforge.org
>> http://rubyforge.org/mailman/listinfo/ironruby-core
>
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org
> http://rubyforge.org/mailman/listinfo/ironruby-core
>
Ivan Porto Carrero
2009-May-10 22:16 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
if you extract the 0.3 release and copy the compiled binaries without the config file over it should be fine. Alternatively you can change the content of ir.exe.config to match your config. IronRuby needs to know the paths in which it can find stuff like rubygems.rb --- Met vriendelijke groeten - Best regards - Salutations Ivan Porto Carrero GSM: +32.486.787.582 Blog: http://flanders.co.nz Twitter: http://twitter.com/casualjim Author of IronRuby in Action (http://manning.com/carrero) Bernard Baruch<http://www.brainyquote.com/quotes/authors/b/bernard_baruch.html> - "Vote for the man who promises least; he''ll be the least disappointing." On Mon, May 11, 2009 at 12:03 AM, Patrick van der Velde < petrikvandervelde at gmail.com> wrote:> Hi Jim > > Thanks for that. I grabbed the sources from GitHub. For now I just > grabbed a zip file as I just want to play around with IronRuby. > > I followed the instructions on the website and managed to build the > solution (using VS2008) just fine. No errors / warnings etc. I then > copied all the binaries into another folder. I also copied the cmd > files from the 0.3 release into that folder. I then tried to run irake > but got another error: > > C:\languages\ironruby\bin>irake > :0:in `require'': no such file to load -- rubygems (LoadError) > from C:/languages/ironruby/bin/irake:9 > > And when I try to run igem to install rake I get: > > C:\languages\ironruby\bin>igem install rake > :0:in `require'': no such file to load -- rubygems (LoadError) > from C:/languages/ironruby/bin/igem:8 > > So any idea where I went wrong? I think I did all the steps in the > right order but given that it''s not working I guess I didn''t entirely > get it right :( > > Thanks heaps for all your help > > Patrick > > > On Mon, May 11, 2009 at 09:20, Jim Deville <jdeville at microsoft.com> wrote: > > Pushed it a little while ago. To build, follow the instructions here: > http://wiki.github.com/ironruby/ironruby/getting-the-sources to get > sources, then here: http://wiki.github.com/ironruby/ironruby/building to > build. If you want to contribute back to the project, you can follow the > instructions here: http://wiki.github.com/ironruby/ironruby/contributing > > > > Hope that helps, feel free to ask if you need help. > > > > JD > > > > ...there is no try > > > > > >> -----Original Message----- > >> From: ironruby-core-bounces at rubyforge.org [mailto:ironruby-core- > >> bounces at rubyforge.org] On Behalf Of Patrick van der Velde > >> Sent: Sunday, May 10, 2009 2:13 PM > >> To: ironruby-core at rubyforge.org > >> Subject: Re: [Ironruby-core] Is it possible to run rake on the latest > binary > >> release of IronRuby? > >> > >> Hi Jim > >> > >> Cool! I''ll be waiting for that one then :) Any idea when you''ll push it > into the > >> trunk? Also do you know if there is a guide for building IronRuby from > scratch > >> so that I can build it and get the fix? > >> > >> Thanks > >> > >> Patrick > >> > >> On Sun, May 10, 2009 at 20:10, Jim Deville <jdeville at microsoft.com> > wrote: > >> > The next time I push, that should be fixed. Tomas just implemented > >> Method#to_proc last week. > >> > > >> > JD > >> > > >> > ....there is no try > >> > Sent from my phone. Please excuse typos and txtspk. > >> > > >> > -----Original Message----- > >> > From: Patrick van der Velde <petrikvandervelde at gmail.com> > >> > Sent: May 09, 2009 11:54 PM > >> > To: ironruby-core at rubyforge.org <ironruby-core at rubyforge.org> > >> > Subject: Re: [Ironruby-core] Is it possible to run rake on the latest > binary > >> release of IronRuby? > >> > > >> > > >> > Hiya > >> > > >> > Ok so I installed rake and got: > >> > > >> > C:\languages\ironruby\bin>igem install rake Successfully installed > >> > rake-0.8.5 > >> > 1 gem installed > >> > Installing ri documentation for rake-0.8.5... > >> > > >> > Invalid output formatter > >> > > >> > For help on options, try ''rdoc --help'' > >> > > >> > Then I assume that not having the documentation is not a problem so I > >> > try to run irake but get: > >> > > >> > C:\languages\ironruby\bin>irake > >> > :0:in `to_proc'': The method or operation is not implemented. > >> > (System::NotImplementedException) > >> > from alt_system.rb:0 > >> > from :0:in `require'' > >> > from custom_require.rb:26:in `require'' > >> > from win32.rb:0 > >> > from :0:in `require'' > >> > from custom_require.rb:26:in `require'' > >> > from rake.rb:0 > >> > from :0:in `require'' > >> > from custom_require.rb:26:in `require'' > >> > from rake:0 > >> > from :0:in `load'' > >> > from irake:0 > >> > > >> > Any ideas on this one? Am I missing more gems? > >> > > >> > Oh and yes I''m on a Windows machine :) > >> > > >> > Thanks > >> > > >> > Patrick > >> > > >> > > >> > On Sun, May 10, 2009 at 18:34, Ivan Porto Carrero < > ivan at flanders.co.nz> > >> wrote: > >> >> Hi Patrick > >> >> You will need the rake gem to be installed in IronRuby for the irake > >> >> command to work. > >> >> You can do that with the igem command igem install rake I assume > >> >> you''re using windows because the igem command is broken again on > >> >> mono. > >> >> --- > >> >> Met vriendelijke groeten - Best regards - Salutations Ivan Porto > >> >> Carrero > >> >> Blog: http://flanders.co.nz > >> >> Twitter: http://twitter.com/casualjim Author of IronRuby in Action > >> >> (http://manning.com/carrero) > >> >> > >> >> Charles Kuralt - "You can find your way across this country using > >> >> burger joints the way a navigator uses stars." > >> >> > >> >> On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde > >> >> <petrikvandervelde at gmail.com> wrote: > >> >>> > >> >>> Hiya > >> >>> > >> >>> Mmm ok I''m a little confused here. So irake does work but possibly > >> >>> not on the latest binary release? Also does irake need rake under > >> >>> the covers or should it just be able to run rake files without any > >> >>> link to Ruby. I haven''t got Ruby installed on my machine (but I do > >> >>> have ironruby). Also do I need to set any paths etc? > >> >>> Sorry about all the stupid questions but I''m very new to ironruby > >> >>> (and ruby actually) so I''m not sure where to search for the solution > >> >>> to my problem. > >> >>> > >> >>> Thanks > >> >>> > >> >>> Patrick > >> >>> > >> >>> On Sat, May 9, 2009 at 13:35, Jimmy Schementi > >> >>> <Jimmy.Schementi at microsoft.com> wrote: > >> >>> > It definitely works for me, as I can do things like irake > >> >>> > db:migrate, but this is out of my fork''s railsconf branch; I''ll be > >> >>> > making sure the main repo has all the necessary fixed to run rake > >> >>> > and rails without any major workarounds. > >> >>> > > >> >>> > ~Jimmy > >> >>> > Sent from my phone > >> >>> > > >> >>> > On May 8, 2009, at 4:00 PM, "Patrick van der Velde" > >> >>> > <petrikvandervelde at gmail.com > >> >>> > > wrote: > >> >>> > > >> >>> >> Hi All > >> >>> >> > >> >>> >> I was wondering if it was possible to run rake (or irake) on the > >> >>> >> latest binary release of IronRuby. I''ve searched the mailing list > >> >>> >> but all posts relating to rake are several months old and are not > >> >>> >> related to the binary releases :( I''ve tried to run irake but I''m > >> >>> >> getting NotImplementedExceptions when I run it. If anybody has > >> >>> >> suggestions that would be greatly appreciated. > >> >>> >> > >> >>> >> Thanks > >> >>> >> > >> >>> >> Patrick > >> >>> >> _______________________________________________ > >> >>> >> Ironruby-core mailing list > >> >>> >> Ironruby-core at rubyforge.org > >> >>> >> http://rubyforge.org/mailman/listinfo/ironruby-core > >> >>> >> > >> >>> > _______________________________________________ > >> >>> > Ironruby-core mailing list > >> >>> > Ironruby-core at rubyforge.org > >> >>> > http://rubyforge.org/mailman/listinfo/ironruby-core > >> >>> > > >> >>> _______________________________________________ > >> >>> Ironruby-core mailing list > >> >>> Ironruby-core at rubyforge.org > >> >>> http://rubyforge.org/mailman/listinfo/ironruby-core > >> >> > >> >> > >> >> _______________________________________________ > >> >> Ironruby-core mailing list > >> >> Ironruby-core at rubyforge.org > >> >> http://rubyforge.org/mailman/listinfo/ironruby-core > >> >> > >> >> > >> > _______________________________________________ > >> > Ironruby-core mailing list > >> > Ironruby-core at rubyforge.org > >> > http://rubyforge.org/mailman/listinfo/ironruby-core > >> > > >> > _______________________________________________ > >> > Ironruby-core mailing list > >> > Ironruby-core at rubyforge.org > >> > http://rubyforge.org/mailman/listinfo/ironruby-core > >> > > >> _______________________________________________ > >> Ironruby-core mailing list > >> Ironruby-core at rubyforge.org > >> http://rubyforge.org/mailman/listinfo/ironruby-core > > > > _______________________________________________ > > Ironruby-core mailing list > > Ironruby-core at rubyforge.org > > http://rubyforge.org/mailman/listinfo/ironruby-core > > > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://rubyforge.org/pipermail/ironruby-core/attachments/20090511/84b670c2/attachment.html>
Patrick van der Velde
2009-May-10 23:35 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
Hi Ivan Obviously that worked :) Thanks heaps! Patrick On Mon, May 11, 2009 at 10:16, Ivan Porto Carrero <ivan at flanders.co.nz> wrote:> if you extract the 0.3 release and copy the compiled binaries without the > config file over it should be fine. > Alternatively you can change the content of ir.exe.config to match your > config. > IronRuby needs to know the paths in which it can find stuff like rubygems.rb > --- > Met vriendelijke groeten - Best regards - Salutations > Ivan Porto Carrero > GSM: +32.486.787.582 > Blog: http://flanders.co.nz > Twitter: http://twitter.com/casualjim > Author of IronRuby in Action (http://manning.com/carrero) > > Bernard Baruch ?- "Vote for the man who promises least; he''ll be the least > disappointing." > > On Mon, May 11, 2009 at 12:03 AM, Patrick van der Velde > <petrikvandervelde at gmail.com> wrote: >> >> Hi Jim >> >> Thanks for that. I grabbed the sources from GitHub. For now I just >> grabbed a zip file as I just want to play around with IronRuby. >> >> I followed the instructions on the website and managed to build the >> solution (using VS2008) just fine. No errors / warnings etc. I then >> copied all the binaries into another folder. I also copied the cmd >> files from the 0.3 release into that folder. I then tried to run irake >> but got another error: >> >> C:\languages\ironruby\bin>irake >> :0:in `require'': no such file to load -- rubygems (LoadError) >> ? ? ? ?from C:/languages/ironruby/bin/irake:9 >> >> And when I try to run igem to install rake I get: >> >> C:\languages\ironruby\bin>igem install rake >> :0:in `require'': no such file to load -- rubygems (LoadError) >> ? ? ? ?from C:/languages/ironruby/bin/igem:8 >> >> So any idea where I went wrong? I think I did all the steps in the >> right order but given that it''s not working I guess I didn''t entirely >> get it right :( >> >> Thanks heaps for all your help >> >> Patrick >> >> >> On Mon, May 11, 2009 at 09:20, Jim Deville <jdeville at microsoft.com> wrote: >> > Pushed it a little while ago. ?To build, follow the instructions here: >> > http://wiki.github.com/ironruby/ironruby/getting-the-sources to get sources, >> > then here: http://wiki.github.com/ironruby/ironruby/building to build. If >> > you want to contribute back to the project, you can follow the instructions >> > here: http://wiki.github.com/ironruby/ironruby/contributing >> > >> > Hope that helps, feel free to ask if you need help. >> > >> > JD >> > >> > ...there is no try >> > >> > >> >> -----Original Message----- >> >> From: ironruby-core-bounces at rubyforge.org [mailto:ironruby-core- >> >> bounces at rubyforge.org] On Behalf Of Patrick van der Velde >> >> Sent: Sunday, May 10, 2009 2:13 PM >> >> To: ironruby-core at rubyforge.org >> >> Subject: Re: [Ironruby-core] Is it possible to run rake on the latest >> >> binary >> >> release of IronRuby? >> >> >> >> Hi Jim >> >> >> >> Cool! I''ll be waiting for that one then :) Any idea when you''ll push it >> >> into the >> >> trunk? Also do you know if there is a guide for building IronRuby from >> >> scratch >> >> so that I can build it and get the fix? >> >> >> >> Thanks >> >> >> >> Patrick >> >> >> >> On Sun, May 10, 2009 at 20:10, Jim Deville <jdeville at microsoft.com> >> >> wrote: >> >> > The next time I push, that should be fixed. Tomas just implemented >> >> Method#to_proc last week. >> >> > >> >> > JD >> >> > >> >> > ....there is no try >> >> > Sent from my phone. Please excuse typos and txtspk. >> >> > >> >> > -----Original Message----- >> >> > From: Patrick van der Velde <petrikvandervelde at gmail.com> >> >> > Sent: May 09, 2009 11:54 PM >> >> > To: ironruby-core at rubyforge.org <ironruby-core at rubyforge.org> >> >> > Subject: Re: [Ironruby-core] Is it possible to run rake on the latest >> >> > binary >> >> release of IronRuby? >> >> > >> >> > >> >> > Hiya >> >> > >> >> > Ok so I installed rake and got: >> >> > >> >> > C:\languages\ironruby\bin>igem install rake Successfully installed >> >> > rake-0.8.5 >> >> > 1 gem installed >> >> > Installing ri documentation for rake-0.8.5... >> >> > >> >> > Invalid output formatter >> >> > >> >> > For help on options, try ''rdoc --help'' >> >> > >> >> > Then I assume that not having the documentation is not a problem so I >> >> > try to run irake but get: >> >> > >> >> > C:\languages\ironruby\bin>irake >> >> > :0:in `to_proc'': The method or operation is not implemented. >> >> > (System::NotImplementedException) >> >> > ? ? ? ?from alt_system.rb:0 >> >> > ? ? ? ?from :0:in `require'' >> >> > ? ? ? ?from custom_require.rb:26:in `require'' >> >> > ? ? ? ?from win32.rb:0 >> >> > ? ? ? ?from :0:in `require'' >> >> > ? ? ? ?from custom_require.rb:26:in `require'' >> >> > ? ? ? ?from rake.rb:0 >> >> > ? ? ? ?from :0:in `require'' >> >> > ? ? ? ?from custom_require.rb:26:in `require'' >> >> > ? ? ? ?from rake:0 >> >> > ? ? ? ?from :0:in `load'' >> >> > ? ? ? ?from irake:0 >> >> > >> >> > Any ideas on this one? Am I missing more gems? >> >> > >> >> > Oh and yes I''m on a Windows machine :) >> >> > >> >> > Thanks >> >> > >> >> > Patrick >> >> > >> >> > >> >> > On Sun, May 10, 2009 at 18:34, Ivan Porto Carrero >> >> > <ivan at flanders.co.nz> >> >> wrote: >> >> >> Hi Patrick >> >> >> You will need the rake gem to be installed in IronRuby for the irake >> >> >> command to work. >> >> >> You can do that with the igem command igem install rake I assume >> >> >> you''re using windows because the igem command is broken again on >> >> >> mono. >> >> >> --- >> >> >> Met vriendelijke groeten - Best regards - Salutations Ivan Porto >> >> >> Carrero >> >> >> Blog: http://flanders.co.nz >> >> >> Twitter: http://twitter.com/casualjim Author of IronRuby in Action >> >> >> (http://manning.com/carrero) >> >> >> >> >> >> Charles Kuralt ?- "You can find your way across this country using >> >> >> burger joints the way a navigator uses stars." >> >> >> >> >> >> On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde >> >> >> <petrikvandervelde at gmail.com> wrote: >> >> >>> >> >> >>> Hiya >> >> >>> >> >> >>> Mmm ok I''m a little confused here. So irake does work but possibly >> >> >>> not on the latest binary release? Also does irake need rake under >> >> >>> the covers or should it just be able to run rake files without any >> >> >>> link to Ruby. I haven''t got Ruby installed on my machine (but I do >> >> >>> have ironruby). Also do I need to set any paths etc? >> >> >>> Sorry about all the stupid questions but I''m very new to ironruby >> >> >>> (and ruby actually) so I''m not sure where to search for the >> >> >>> solution >> >> >>> to my problem. >> >> >>> >> >> >>> Thanks >> >> >>> >> >> >>> Patrick >> >> >>> >> >> >>> On Sat, May 9, 2009 at 13:35, Jimmy Schementi >> >> >>> <Jimmy.Schementi at microsoft.com> wrote: >> >> >>> > It definitely works for me, as I can do things like irake >> >> >>> > db:migrate, but this is out of my fork''s railsconf branch; I''ll >> >> >>> > be >> >> >>> > making sure the main repo has all the necessary fixed to run rake >> >> >>> > and rails without any major workarounds. >> >> >>> > >> >> >>> > ~Jimmy >> >> >>> > Sent from my phone >> >> >>> > >> >> >>> > On May 8, 2009, at 4:00 PM, "Patrick van der Velde" >> >> >>> > <petrikvandervelde at gmail.com >> >> >>> > ?> wrote: >> >> >>> > >> >> >>> >> Hi All >> >> >>> >> >> >> >>> >> I was wondering if it was possible to run rake (or irake) on the >> >> >>> >> latest binary release of IronRuby. I''ve searched the mailing >> >> >>> >> list >> >> >>> >> but all posts relating to rake are several months old and are >> >> >>> >> not >> >> >>> >> related to the binary releases :( I''ve tried to run irake but >> >> >>> >> I''m >> >> >>> >> getting NotImplementedExceptions when I run it. If anybody has >> >> >>> >> suggestions that would be greatly appreciated. >> >> >>> >> >> >> >>> >> Thanks >> >> >>> >> >> >> >>> >> Patrick >> >> >>> >> _______________________________________________ >> >> >>> >> Ironruby-core mailing list >> >> >>> >> Ironruby-core at rubyforge.org >> >> >>> >> http://rubyforge.org/mailman/listinfo/ironruby-core >> >> >>> >> >> >> >>> > _______________________________________________ >> >> >>> > Ironruby-core mailing list >> >> >>> > Ironruby-core at rubyforge.org >> >> >>> > http://rubyforge.org/mailman/listinfo/ironruby-core >> >> >>> > >> >> >>> _______________________________________________ >> >> >>> Ironruby-core mailing list >> >> >>> Ironruby-core at rubyforge.org >> >> >>> http://rubyforge.org/mailman/listinfo/ironruby-core >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> Ironruby-core mailing list >> >> >> Ironruby-core at rubyforge.org >> >> >> http://rubyforge.org/mailman/listinfo/ironruby-core >> >> >> >> >> >> >> >> > _______________________________________________ >> >> > Ironruby-core mailing list >> >> > Ironruby-core at rubyforge.org >> >> > http://rubyforge.org/mailman/listinfo/ironruby-core >> >> > >> >> > _______________________________________________ >> >> > Ironruby-core mailing list >> >> > Ironruby-core at rubyforge.org >> >> > http://rubyforge.org/mailman/listinfo/ironruby-core >> >> > >> >> _______________________________________________ >> >> Ironruby-core mailing list >> >> Ironruby-core at rubyforge.org >> >> http://rubyforge.org/mailman/listinfo/ironruby-core >> > >> > _______________________________________________ >> > Ironruby-core mailing list >> > Ironruby-core at rubyforge.org >> > http://rubyforge.org/mailman/listinfo/ironruby-core >> > >> _______________________________________________ >> Ironruby-core mailing list >> Ironruby-core at rubyforge.org >> http://rubyforge.org/mailman/listinfo/ironruby-core > > > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core > >
Jimmy Schementi
2009-May-11 06:05 UTC
[Ironruby-core] Is it possible to run rake on the latest binary release of IronRuby?
An implementation of Method#to_proc already exists in Merlin/Main/Languages/Ruby/Libs/hacks.rb, so if Libs is on your path you can just "require ''hacks''" to make rake work.> -----Original Message----- > From: ironruby-core-bounces at rubyforge.org [mailto:ironruby-core- > bounces at rubyforge.org] On Behalf Of Patrick van der Velde > Sent: Sunday, May 10, 2009 2:13 PM > To: ironruby-core at rubyforge.org > Subject: Re: [Ironruby-core] Is it possible to run rake on the latest > binary release of IronRuby? > > Hi Jim > > Cool! I''ll be waiting for that one then :) Any idea when you''ll push > it into the trunk? Also do you know if there is a guide for building > IronRuby from scratch so that I can build it and get the fix? > > Thanks > > Patrick > > On Sun, May 10, 2009 at 20:10, Jim Deville <jdeville at microsoft.com> > wrote: > > The next time I push, that should be fixed. Tomas just implemented > Method#to_proc last week. > > > > JD > > > > ....there is no try > > Sent from my phone. Please excuse typos and txtspk. > > > > -----Original Message----- > > From: Patrick van der Velde <petrikvandervelde at gmail.com> > > Sent: May 09, 2009 11:54 PM > > To: ironruby-core at rubyforge.org <ironruby-core at rubyforge.org> > > Subject: Re: [Ironruby-core] Is it possible to run rake on the latest > binary release of IronRuby? > > > > > > Hiya > > > > Ok so I installed rake and got: > > > > C:\languages\ironruby\bin>igem install rake > > Successfully installed rake-0.8.5 > > 1 gem installed > > Installing ri documentation for rake-0.8.5... > > > > Invalid output formatter > > > > For help on options, try ''rdoc --help'' > > > > Then I assume that not having the documentation is not a problem so I > > try to run irake but get: > > > > C:\languages\ironruby\bin>irake > > :0:in `to_proc'': The method or operation is not implemented. > > (System::NotImplementedException) > > from alt_system.rb:0 > > from :0:in `require'' > > from custom_require.rb:26:in `require'' > > from win32.rb:0 > > from :0:in `require'' > > from custom_require.rb:26:in `require'' > > from rake.rb:0 > > from :0:in `require'' > > from custom_require.rb:26:in `require'' > > from rake:0 > > from :0:in `load'' > > from irake:0 > > > > Any ideas on this one? Am I missing more gems? > > > > Oh and yes I''m on a Windows machine :) > > > > Thanks > > > > Patrick > > > > > > On Sun, May 10, 2009 at 18:34, Ivan Porto Carrero > <ivan at flanders.co.nz> wrote: > >> Hi Patrick > >> You will need the rake gem to be installed in IronRuby for the irake > command > >> to work. > >> You can do that with the igem command > >> igem install rake > >> I assume you''re using windows because the igem command is broken > again on > >> mono. > >> --- > >> Met vriendelijke groeten - Best regards - Salutations > >> Ivan Porto Carrero > >> Blog: http://flanders.co.nz > >> Twitter: http://twitter.com/casualjim > >> Author of IronRuby in Action (http://manning.com/carrero) > >> > >> Charles Kuralt - "You can find your way across this country using > burger > >> joints the way a navigator uses stars." > >> > >> On Sun, May 10, 2009 at 2:11 AM, Patrick van der Velde > >> <petrikvandervelde at gmail.com> wrote: > >>> > >>> Hiya > >>> > >>> Mmm ok I''m a little confused here. So irake does work but possibly > not > >>> on the latest binary release? Also does irake need rake under the > >>> covers or should it just be able to run rake files without any link > to > >>> Ruby. I haven''t got Ruby installed on my machine (but I do have > >>> ironruby). Also do I need to set any paths etc? > >>> Sorry about all the stupid questions but I''m very new to ironruby > (and > >>> ruby actually) so I''m not sure where to search for the solution to > my > >>> problem. > >>> > >>> Thanks > >>> > >>> Patrick > >>> > >>> On Sat, May 9, 2009 at 13:35, Jimmy Schementi > >>> <Jimmy.Schementi at microsoft.com> wrote: > >>> > It definitely works for me, as I can do things like irake > db:migrate, > >>> > but this is out of my fork''s railsconf branch; I''ll be making > sure the > >>> > main repo has all the necessary fixed to run rake and rails > without > >>> > any major workarounds. > >>> > > >>> > ~Jimmy > >>> > Sent from my phone > >>> > > >>> > On May 8, 2009, at 4:00 PM, "Patrick van der Velde" > >>> > <petrikvandervelde at gmail.com > >>> > > wrote: > >>> > > >>> >> Hi All > >>> >> > >>> >> I was wondering if it was possible to run rake (or irake) on the > >>> >> latest binary release of IronRuby. I''ve searched the mailing > list but > >>> >> all posts relating to rake are several months old and are not > related > >>> >> to the binary releases :( I''ve tried to run irake but I''m > getting > >>> >> NotImplementedExceptions when I run it. If anybody has > suggestions > >>> >> that would be greatly appreciated. > >>> >> > >>> >> Thanks > >>> >> > >>> >> Patrick > >>> >> _______________________________________________ > >>> >> Ironruby-core mailing list > >>> >> Ironruby-core at rubyforge.org > >>> >> http://rubyforge.org/mailman/listinfo/ironruby-core > >>> >> > >>> > _______________________________________________ > >>> > Ironruby-core mailing list > >>> > Ironruby-core at rubyforge.org > >>> > http://rubyforge.org/mailman/listinfo/ironruby-core > >>> > > >>> _______________________________________________ > >>> Ironruby-core mailing list > >>> Ironruby-core at rubyforge.org > >>> http://rubyforge.org/mailman/listinfo/ironruby-core > >> > >> > >> _______________________________________________ > >> Ironruby-core mailing list > >> Ironruby-core at rubyforge.org > >> http://rubyforge.org/mailman/listinfo/ironruby-core > >> > >> > > _______________________________________________ > > Ironruby-core mailing list > > Ironruby-core at rubyforge.org > > http://rubyforge.org/mailman/listinfo/ironruby-core > > > > _______________________________________________ > > Ironruby-core mailing list > > Ironruby-core at rubyforge.org > > http://rubyforge.org/mailman/listinfo/ironruby-core > > > _______________________________________________ > Ironruby-core mailing list > Ironruby-core at rubyforge.org > http://rubyforge.org/mailman/listinfo/ironruby-core