thr3ads.net - Ironruby core - [Ironruby-core] problems with new rakefile require ''pathname2'' [Sep 2007]

If this information is useful, please help other people find it:
Share via:

Eric Nicholson

2007-Sep-26 00:23 UTC

[Ironruby-core] problems with new rakefile require ''pathname2''

When I run the updated rakefile I get "no such file to load --
pathname2".
Is it possible that this file wasn''t added to SVN in the last update?

-Eric
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070925/f02aeb49/attachment.html

John Lam (DLR)

2007-Sep-26 00:24 UTC

head link

[Ironruby-core] problems with new rakefile require ''pathname2''

It''s a gem - just gem install pathname2.

Thanks,
-John


From: ironruby-core-bounces at rubyforge.org [mailto:ironruby-core-bounces at
rubyforge.org] On Behalf Of Eric Nicholson
Sent: Tuesday, September 25, 2007 5:24 PM
To: ironruby-core at rubyforge.org
Subject: [Ironruby-core] problems with new rakefile require
''pathname2''

When I run the updated rakefile I get "no such file to load --
pathname2".  Is it possible that this file wasn''t added to SVN in
the last update?

-Eric
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070925/0f7a0175/attachment.html

Eric Nicholson

2007-Sep-26 00:44 UTC

head link

[Ironruby-core] problems with new rakefile require ''pathname2''

The build works much better now.  Thanks!

Any chance we could get that as a "require_gem" in a future release?

On 9/25/07, John Lam (DLR) <jflam at microsoft.com>
wrote:>
>  It''s a gem ? just gem install pathname2.
>
>
>
> Thanks,
>
> -John
>
>
>
>
>
> *From:* ironruby-core-bounces at rubyforge.org [mailto:
> ironruby-core-bounces at rubyforge.org] *On Behalf Of *Eric Nicholson
> *Sent:* Tuesday, September 25, 2007 5:24 PM
> *To:* ironruby-core at rubyforge.org
> *Subject:* [Ironruby-core] problems with new rakefile require
''pathname2''
>
>
>
> When I run the updated rakefile I get "no such file to load --
> pathname2".  Is it possible that this file wasn''t added to
SVN in the last
> update?
>
> -Eric
>
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org
> http://rubyforge.org/mailman/listinfo/ironruby-core
>
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070925/f31b751f/attachment-0001.html

Eric Nicholson

2007-Sep-26 01:05 UTC

head link

[Ironruby-core] problems with new rakefile require ''pathname2''

What value do we need to have for "MERLIN_ROOT"?  I''m getting
errors in
common.rb when running the test suite:

c:/source/ironruby/trunk/tests/ironruby/common.rb:25: undefined method
`+''
for nil:NilClass (NoMethodError)
        from c:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in
`gem_original_require''
        from c:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in
`require''
        from run.rb:5

-Eric

On 9/25/07, Eric Nicholson <enicholson at gmail.com>
wrote:>
> The build works much better now.  Thanks!
>
> Any chance we could get that as a "require_gem" in a future
release?
>
> On 9/25/07, John Lam (DLR) <jflam at microsoft.com> wrote:
>
> >  It''s a gem ? just gem install pathname2.
> >
> >
> >
> > Thanks,
> >
> > -John
> >
> >
> >
> >
> >
> > *From:* ironruby-core-bounces at rubyforge.org [mailto:
> > ironruby-core-bounces at rubyforge.org] *On Behalf Of *Eric Nicholson
> > *Sent:* Tuesday, September 25, 2007 5:24 PM
> > *To:* ironruby-core at rubyforge.org
> > *Subject:* [Ironruby-core] problems with new rakefile require
> > ''pathname2''
> >
> >
> >
> > When I run the updated rakefile I get "no such file to load --
> > pathname2".  Is it possible that this file wasn''t added
to SVN in the last
> > update?
> >
> > -Eric
> >
> > _______________________________________________
> > Ironruby-core mailing list
> > Ironruby-core at rubyforge.org
> > http://rubyforge.org/mailman/listinfo/ironruby-core
> >
> >
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070925/7ebcaf38/attachment.html

John Lam (DLR)

2007-Sep-26 15:47 UTC

head link

[Ironruby-core] problems with new rakefile require ''pathname2''

Hi Eric,

Those are our internal tests, which don''t use the same logic that the
Rakefile uses to determine where they''re being run from. For the time
being I''m going to disable those tests and open a bug against Haibo who
owns that test suite.

Thanks!
-John


From: ironruby-core-bounces at rubyforge.org [mailto:ironruby-core-bounces at
rubyforge.org] On Behalf Of Eric Nicholson
Sent: Tuesday, September 25, 2007 6:05 PM
To: ironruby-core at rubyforge.org
Subject: Re: [Ironruby-core] problems with new rakefile require
''pathname2''

What value do we need to have for "MERLIN_ROOT"?  I''m getting
errors in common.rb when running the test suite:

c:/source/ironruby/trunk/tests/ironruby/common.rb:25: undefined method
`+'' for nil:NilClass (NoMethodError)
        from c:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in
`gem_original_require''
        from c:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in
`require''
        from run.rb :5

-Eric
On 9/25/07, Eric Nicholson <enicholson at gmail.com<mailto:enicholson at
gmail.com>> wrote:
The build works much better now.  Thanks!

Any chance we could get that as a "require_gem" in a future release?
On 9/25/07, John Lam (DLR) <jflam at microsoft.com<mailto:jflam at
microsoft.com>> wrote:

It''s a gem - just gem install pathname2.



Thanks,

-John





From: ironruby-core-bounces at rubyforge.org <mailto:ironruby-core-bounces at
rubyforge.org> [mailto:ironruby-core-bounces at
rubyforge.org<mailto:ironruby-core-bounces at rubyforge.org>] On Behalf Of
Eric Nicholson
Sent: Tuesday, September 25, 2007 5:24 PM
To: ironruby-core at rubyforge.org<mailto:ironruby-core at rubyforge.org>
Subject: [Ironruby-core] problems with new rakefile require
''pathname2''



When I run the updated rakefile I get "no such file to load --
pathname2".  Is it possible that this file wasn''t added to SVN in
the last update?

-Eric

_______________________________________________
Ironruby-core mailing list
Ironruby-core at rubyforge.org <mailto:Ironruby-core at rubyforge.org>
http://rubyforge.org/mailman/listinfo/ironruby-core


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070926/55440d7a/attachment.html

Stefan Hüttenrauch

2007-Sep-26 16:29 UTC

head link

[Ironruby-core] problems with strongly named assemblies

Hi together,

I tried to assign a strong name to the IronRuby DLLs to be used with
Sharepoint.
Therefore I opened the IronRuby.sln in VS2005 and changed the properties of
every reference project to use src/microsoft.scripting/DebugKey.snk as a
keyfile to sign the assembly, b/c it was the only key file I found.
Doing so I got an error message building the solution (Referenced Assembly Ruby
does not have a strong name). So it seems that signing the Ruby
project/assembly doesn''t work.

My second attempt was to generate a new keypair with sn.exe referencing it in
the ruby project properties and treating it isolated from the IronRuby
solution. No success.

I then tried ildasm followed by ilasm using a self-generated keypair file for
the Microsoft.Scripting.dll first and after another build the Ruby.dll. It
worked, at least I could copy the dlls to my global assembly cache. But!!
Referencing both dlls in a VS2005 project threw the following exception right
after starting the application:
Could not load file or assembly ''Microsoft.Scripting,
Version=1.0.0.400,
Culture=neutral, PublicKeyToken=null'' or one of its dependencies. A
strongly-named assembly is required.

Now I am wondering why something is still asking for an assembly with
PublicKeyToken=null, since both Ruby.dll and Microsoft.Scripting.dll are signed
with a strong name.

Do you have any advice?
Did I take the wrong way somewhere?

Looking forward to an answer...
Stefan

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070926/dae4549a/attachment-0001.html

Stefan Hüttenrauch

2007-Sep-26 16:29 UTC

head link

[Ironruby-core] problems with new rakefile require ''pathname2''

I did the gem install for pathname2 and now get
rake aborted!
no such file to load -- windows/path

which goes down to the following code snipped in
c:/ruby/lib/ruby/gems/1.8/gems/pathname2-1.5.2/lib/pathname2.rb:54
53 if RUBY_PLATFORM.match(''mswin'')
54      require ''windows/path''
55      require ''windows/file''
56      include Windows::Path
57      include Windows::File
58 end


Does anybody have any ideas?
Thanks
Stefan

 

 

From: ironruby-core-bounces at rubyforge.org
[mailto:ironruby-core-bounces at rubyforge.org] On Behalf Of Eric Nicholson
Sent: Mittwoch, 26. September 2007 02:45
To: ironruby-core at rubyforge.org
Subject: Re: [Ironruby-core] problems with new rakefile require
''pathname2''

 

The build works much better now.  Thanks!

Any chance we could get that as a "require_gem" in a future release?

On 9/25/07, John Lam (DLR) <jflam at microsoft.com> wrote:

It''s a gem ? just gem install pathname2.

 

Thanks,

-John

 

 

From: ironruby-core-bounces at rubyforge.org
[mailto:ironruby-core-bounces at rubyforge.org] On Behalf Of Eric Nicholson
Sent: Tuesday, September 25, 2007 5:24 PM
To: ironruby-core at rubyforge.org
Subject: [Ironruby-core] problems with new rakefile require
''pathname2''

 

When I run the updated rakefile I get "no such file to load --
pathname2".  Is
it possible that this file wasn''t added to SVN in the last update?

-Eric


_______________________________________________
Ironruby-core mailing list
Ironruby-core at rubyforge.org
http://rubyforge.org/mailman/listinfo/ironruby-core

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070926/5e72c5bc/attachment.html

John Lam (DLR)

2007-Sep-26 16:40 UTC

head link

[Ironruby-core] problems with strongly named assemblies

Here''s an answer from Dino on my team:

Thanks,
-John


He needs to define SIGNED when building (Microsoft.Scripting) and update the
public key in ScriptEnvironmentSetup.cs which currently looks like:

#if SIGNED
                    new
LanguageProviderSetup("IronPython.Hosting.PythonLanguageProvider",
"IronPython, Version=2.0.0.400, Culture=neutral,
PublicKeyToken=31bf3856ad364e35", ".py", "py",
"python", "ironpython"),
                    new
LanguageProviderSetup("Microsoft.JScript.Compiler.Hosting.LanguageProvider",
"Microsoft.JScript.Compiler, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35", ".jsx", ".js",
"managedjscript", "js", "jscript"),
                    new
LanguageProviderSetup("Ruby.Hosting.RubyLanguageProvider", "Ruby,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35",
".rb", "rb", "ruby", "ironruby"),
                    new
LanguageProviderSetup("Microsoft.VisualBasic.Scripting.Hosting.VisualBasicLanguageProvider",
"Microsoft.VisualBasic.Scripting, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35", ".vbx", "vbx"),
#else
                    new
LanguageProviderSetup("IronPython.Hosting.PythonLanguageProvider",
"IronPython", ".py", "py", "python",
"ironpython"),
                    new
LanguageProviderSetup("Microsoft.JScript.Compiler.Hosting.LanguageProvider",
"Microsoft.JScript.Compiler", ".jsx", ".js",
"managedjscript", "js", "jscript"),
                    new
LanguageProviderSetup("Microsoft.VisualBasic.Scripting.Hosting.VisualBasicLanguageProvider",
"Microsoft.VisualBasic.Scripting", ".vbx", "vbx"),
                    new
LanguageProviderSetup("Ruby.Hosting.RubyLanguageProvider",
"Ruby", ".rb", "rb", "ruby",
"ironruby")
#endif




From: ironruby-core-bounces at rubyforge.org [mailto:ironruby-core-bounces at
rubyforge.org] On Behalf Of Stefan H?ttenrauch
Sent: Wednesday, September 26, 2007 9:29 AM
To: ironruby-core at rubyforge.org
Subject: [Ironruby-core] problems with strongly named assemblies

Hi together,


I tried to assign a strong name to the IronRuby DLLs to be used with Sharepoint.
Therefore I opened the IronRuby.sln in VS2005 and changed the properties of
every reference project to use src/microsoft.scripting/DebugKey.snk as a keyfile
to sign the assembly, b/c it was the only key file I found.
Doing so I got an error message building the solution (Referenced Assembly Ruby
does not have a strong name). So it seems that signing the Ruby project/assembly
doesn''t work.

My second attempt was to generate a new keypair with sn.exe referencing it in
the ruby project properties and treating it isolated from the IronRuby solution.
No success.

I then tried ildasm followed by ilasm using a self-generated keypair file for
the Microsoft.Scripting.dll first and after another build the Ruby.dll. It
worked, at least I could copy the dlls to my global assembly cache. But!!
Referencing both dlls in a VS2005 project threw the following exception right
after starting the application:
Could not load file or assembly ''Microsoft.Scripting,
Version=1.0.0.400, Culture=neutral, PublicKeyToken=null'' or one of its
dependencies. A strongly-named assembly is required.

Now I am wondering why something is still asking for an assembly with
PublicKeyToken=null, since both Ruby.dll and Microsoft.Scripting.dll are signed
with a strong name.

Do you have any advice?
Did I take the wrong way somewhere?

Looking forward to an answer...
Stefan

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070926/f6fc22c4/attachment-0001.html

Tony Djordjevski

2007-Sep-26 16:45 UTC

head link

[Ironruby-core] problems with new rakefile require ''pathname2''

I had the same problem.  Ultimately, I fixed it by uninstalling my Ruby 
One-Click installer and installing the most recent version:

http://rubyforge.org/frs/download.php/18566/ruby186-25.exe

After the installation, I did a "gem install -y pathname2" and then I 
was able to compile.

Tony

Stefan H?ttenrauch wrote:> I did the gem install for pathname2 and now get
> rake aborted!
> no such file to load -- windows/path
> 
> which goes down to the following code snipped in 
> c:/ruby/lib/ruby/gems/1.8/gems/pathname2-1.5.2/lib/pathname2.rb:54
> 53 if RUBY_PLATFORM.match(''mswin'')
> 54      require ''windows/path''
> 55      require ''windows/file''
> 56      include Windows::Path
> 57      include Windows::File
> 58 end
> 
> 
> Does anybody have any ideas?
> Thanks
> Stefan
> 
>  
> 
>  
> 
> *From:* ironruby-core-bounces at rubyforge.org 
> [mailto:ironruby-core-bounces at rubyforge.org] *On Behalf Of *Eric
Nicholson
> *Sent:* Mittwoch, 26. September 2007 02:45
> *To:* ironruby-core at rubyforge.org
> *Subject:* Re: [Ironruby-core] problems with new rakefile require 
> ''pathname2''
> 
>  
> 
> The build works much better now.  Thanks!
> 
> Any chance we could get that as a "require_gem" in a future
release?
> 
> On 9/25/07, *John Lam (DLR)* <jflam at microsoft.com 
> <mailto:jflam at microsoft.com>> wrote:
> 
> It''s a gem ? just gem install pathname2.
> 
>  
> 
> Thanks,
> 
> -John
> 
>  
> 
>  
> 
> *From:* ironruby-core-bounces at rubyforge.org 
> <mailto:ironruby-core-bounces at
rubyforge.org>[mailto:ironruby-core-bounces at rubyforge.org
> <mailto:ironruby-core-bounces at rubyforge.org>] *On Behalf Of *Eric
Nicholson
> *Sent:* Tuesday, September 25, 2007 5:24 PM
> *To:* ironruby-core at rubyforge.org <mailto:ironruby-core at
rubyforge.org>
> *Subject:* [Ironruby-core] problems with new rakefile require
''pathname2''
> 
>  
> 
> When I run the updated rakefile I get "no such file to load -- 
> pathname2".  Is it possible that this file wasn''t added to
SVN in the
> last update?
> 
> -Eric
> 
> 
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org <mailto:Ironruby-core at
rubyforge.org>
> http://rubyforge.org/mailman/listinfo/ironruby-core
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org
> http://rubyforge.org/mailman/listinfo/ironruby-core

Eric Nicholson

2007-Sep-26 17:25 UTC

head link

[Ironruby-core] problems with new rakefile require ''pathname2''

The tests run now, but a lot of the tests are being skipped.   Is there some
easy way I can get those going?

The reason I ask is that I''m trying to get a DSL built on IronRuby, and
I
needed to make some tweaks to Kernel & RubyOps to get all the scoping
resolved right.  I just want to make sure I haven''t broken anything too
important :)

Thanks!
Eric

On 9/26/07, John Lam (DLR) <jflam at microsoft.com>
wrote:>
>  Hi Eric,
>
>
>
> Those are our internal tests, which don''t use the same logic that
the
> Rakefile uses to determine where they''re being run from. For the
time being
> I''m going to disable those tests and open a bug against Haibo who
owns that
> test suite.
>
>
>
> Thanks!
>
> -John
>
>
>
>
>
> *From:* ironruby-core-bounces at rubyforge.org [mailto:
> ironruby-core-bounces at rubyforge.org] *On Behalf Of *Eric Nicholson
> *Sent:* Tuesday, September 25, 2007 6:05 PM
> *To:* ironruby-core at rubyforge.org
> *Subject:* Re: [Ironruby-core] problems with new rakefile require
> ''pathname2''
>
>
>
> What value do we need to have for "MERLIN_ROOT"?  I''m
getting errors in
> common.rb when running the test suite:
>
> c:/source/ironruby/trunk/tests/ironruby/common.rb:25: undefined method
`+''
> for nil:NilClass (NoMethodError)
>         from
> c:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in
> `gem_original_require''
>         from
> c:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in
`require''
>         from run.rb :5
>
> -Eric
>
> On 9/25/07, *Eric Nicholson* <enicholson at gmail.com> wrote:
>
> The build works much better now.  Thanks!
>
> Any chance we could get that as a "require_gem" in a future
release?
>
> On 9/25/07, *John Lam (DLR)* <jflam at microsoft.com> wrote:
>
>   It''s a gem ? just gem install pathname2.
>
>
>
> Thanks,
>
> -John
>
>
>
>
>
> *From:* ironruby-core-bounces at rubyforge.org [mailto:
> ironruby-core-bounces at rubyforge.org] *On Behalf Of *Eric Nicholson
> *Sent:* Tuesday, September 25, 2007 5:24 PM
> *To:* ironruby-core at rubyforge.org
> *Subject:* [Ironruby-core] problems with new rakefile require
''pathname2''
>
>
>
> When I run the updated rakefile I get "no such file to load --
> pathname2".  Is it possible that this file wasn''t added to
SVN in the last
> update?
>
> -Eric
>
>
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org
> http://rubyforge.org/mailman/listinfo/ironruby-core
>
>
>
>
>
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org
> http://rubyforge.org/mailman/listinfo/ironruby-core
>
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070926/58eefc34/attachment.html

Stefan Hüttenrauch

2007-Sep-26 20:34 UTC

head link

[Ironruby-core] problems with strongly named assemblies

It looks like this did the trick,

Thanks

Stefan

 

 

From: ironruby-core-bounces at rubyforge.org
[mailto:ironruby-core-bounces at rubyforge.org] On Behalf Of John Lam (DLR)
Sent: Mittwoch, 26. September 2007 18:41
To: ironruby-core at rubyforge.org
Subject: Re: [Ironruby-core] problems with strongly named assemblies

 

Here?s an answer from Dino on my team:

 

Thanks,

-John

 

 

He needs to define SIGNED when building (Microsoft.Scripting) and update the
public key in ScriptEnvironmentSetup.cs which currently looks like:

 

#if SIGNED

                    new
LanguageProviderSetup("IronPython.Hosting.PythonLanguageProvider",
"IronPython,
Version=2.0.0.400, Culture=neutral, PublicKeyToken=31bf3856ad364e35",
".py",
"py", "python", "ironpython"),

                    new
LanguageProviderSetup("Microsoft.JScript.Compiler.Hosting.LanguageProvider",
"Microsoft.JScript.Compiler, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35", ".jsx", ".js",
"managedjscript", "js",
"jscript"),

                    new
LanguageProviderSetup("Ruby.Hosting.RubyLanguageProvider", "Ruby,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35",
".rb",
"rb", "ruby", "ironruby"),

                    new
LanguageProviderSetup("Microsoft.VisualBasic.Scripting.Hosting.VisualBasicLangu
ageProvider", "Microsoft.VisualBasic.Scripting, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35", ".vbx",
"vbx"),

#else

                    new
LanguageProviderSetup("IronPython.Hosting.PythonLanguageProvider",
"IronPython", ".py", "py", "python",
"ironpython"),

                    new
LanguageProviderSetup("Microsoft.JScript.Compiler.Hosting.LanguageProvider",
"Microsoft.JScript.Compiler", ".jsx", ".js",
"managedjscript", "js",
"jscript"),

                    new
LanguageProviderSetup("Microsoft.VisualBasic.Scripting.Hosting.VisualBasicLangu
ageProvider", "Microsoft.VisualBasic.Scripting",
".vbx", "vbx"),

                    new
LanguageProviderSetup("Ruby.Hosting.RubyLanguageProvider",
"Ruby", ".rb", "rb",
"ruby", "ironruby")

#endif

 

 

 

 

From: ironruby-core-bounces at rubyforge.org
[mailto:ironruby-core-bounces at rubyforge.org] On Behalf Of Stefan H?ttenrauch
Sent: Wednesday, September 26, 2007 9:29 AM
To: ironruby-core at rubyforge.org
Subject: [Ironruby-core] problems with strongly named assemblies

 

Hi together,


I tried to assign a strong name to the IronRuby DLLs to be used with
Sharepoint.
Therefore I opened the IronRuby.sln in VS2005 and changed the properties of
every reference project to use src/microsoft.scripting/DebugKey.snk as a
keyfile to sign the assembly, b/c it was the only key file I found.
Doing so I got an error message building the solution (Referenced Assembly Ruby
does not have a strong name). So it seems that signing the Ruby
project/assembly doesn''t work.

My second attempt was to generate a new keypair with sn.exe referencing it in
the ruby project properties and treating it isolated from the IronRuby
solution. No success.

I then tried ildasm followed by ilasm using a self-generated keypair file for
the Microsoft.Scripting.dll first and after another build the Ruby.dll. It
worked, at least I could copy the dlls to my global assembly cache. But!!
Referencing both dlls in a VS2005 project threw the following exception right
after starting the application:
Could not load file or assembly ''Microsoft.Scripting,
Version=1.0.0.400,
Culture=neutral, PublicKeyToken=null'' or one of its dependencies. A
strongly-named assembly is required.

Now I am wondering why something is still asking for an assembly with
PublicKeyToken=null, since both Ruby.dll and Microsoft.Scripting.dll are signed
with a strong name.

Do you have any advice?
Did I take the wrong way somewhere?

Looking forward to an answer...
Stefan

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070926/829aea21/attachment-0001.html

Stefan Hüttenrauch

2007-Sep-26 21:08 UTC

head link

[Ironruby-core] problems with new rakefile require ''pathname2''

Thanks, Tony for your answer,
with IronRuby revision 35 it worked. Before I had 33 and that wasn''t
even
working with your work-around.
Cheers,
Stefan


-----Original Message-----
From: ironruby-core-bounces at rubyforge.org
[mailto:ironruby-core-bounces at rubyforge.org] On Behalf Of Tony Djordjevski
Sent: Mittwoch, 26. September 2007 18:46
To: ironruby-core at rubyforge.org
Subject: Re: [Ironruby-core] problems with new rakefile require
''pathname2''

I had the same problem.  Ultimately, I fixed it by uninstalling my Ruby 
One-Click installer and installing the most recent version:

http://rubyforge.org/frs/download.php/18566/ruby186-25.exe

After the installation, I did a "gem install -y pathname2" and then I 
was able to compile.

Tony

Stefan H?ttenrauch wrote:> I did the gem install for pathname2 and now get
> rake aborted!
> no such file to load -- windows/path
> 
> which goes down to the following code snipped in 
> c:/ruby/lib/ruby/gems/1.8/gems/pathname2-1.5.2/lib/pathname2.rb:54
> 53 if RUBY_PLATFORM.match(''mswin'')
> 54      require ''windows/path''
> 55      require ''windows/file''
> 56      include Windows::Path
> 57      include Windows::File
> 58 end
> 
> 
> Does anybody have any ideas?
> Thanks
> Stefan
> 
>  
> 
>  
> 
> *From:* ironruby-core-bounces at rubyforge.org 
> [mailto:ironruby-core-bounces at rubyforge.org] *On Behalf Of *Eric
Nicholson
> *Sent:* Mittwoch, 26. September 2007 02:45
> *To:* ironruby-core at rubyforge.org
> *Subject:* Re: [Ironruby-core] problems with new rakefile require 
> ''pathname2''
> 
>  
> 
> The build works much better now.  Thanks!
> 
> Any chance we could get that as a "require_gem" in a future
release?
> 
> On 9/25/07, *John Lam (DLR)* <jflam at microsoft.com 
> <mailto:jflam at microsoft.com>> wrote:
> 
> It''s a gem ? just gem install pathname2.
> 
>  
> 
> Thanks,
> 
> -John
> 
>  
> 
>  
> 
> *From:* ironruby-core-bounces at rubyforge.org 
><mailto:ironruby-core-bounces at
rubyforge.org>[mailto:ironruby-core-bounces at rubyf
orge.org > <mailto:ironruby-core-bounces at rubyforge.org>] *On Behalf Of *Eric
Nicholson
> *Sent:* Tuesday, September 25, 2007 5:24 PM
> *To:* ironruby-core at rubyforge.org <mailto:ironruby-core at
rubyforge.org>
> *Subject:* [Ironruby-core] problems with new rakefile require
''pathname2''
> 
>  
> 
> When I run the updated rakefile I get "no such file to load -- 
> pathname2".  Is it possible that this file wasn''t added to
SVN in the
> last update?
> 
> -Eric
> 
> 
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org <mailto:Ironruby-core at
rubyforge.org>
> http://rubyforge.org/mailman/listinfo/ironruby-core
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Ironruby-core mailing list
> Ironruby-core at rubyforge.org
> http://rubyforge.org/mailman/listinfo/ironruby-core_______________________________________________
Ironruby-core mailing list
Ironruby-core at rubyforge.org
http://rubyforge.org/mailman/listinfo/ironruby-core

Stefan Hüttenrauch

2007-Sep-27 14:14 UTC

head link

[Ironruby-core] problems with strongly named assemblies

Hi again,

I moved forward on my way to include IronRuby within a WebPart for SharePoint
server.
I included some code that calls IronRuby (like
re.ExecuteCommand("something");)
but wasn''t able to prove if it is working.
Trying to create a file or displaying a messageBox on rendering the WebPart did
nothing visible. The MessageBox didn''t appear neither did the file.

Do you have any ideas on what I can use in order to produce a visible output
from within a WebPart for SharePoint.

Thanks
Stefan

 

 

From: ironruby-core-bounces at rubyforge.org
[mailto:ironruby-core-bounces at rubyforge.org] On Behalf Of John Lam (DLR)
Sent: Mittwoch, 26. September 2007 18:41
To: ironruby-core at rubyforge.org
Subject: Re: [Ironruby-core] problems with strongly named assemblies

 

Here?s an answer from Dino on my team:

 

Thanks,

-John

 

 

He needs to define SIGNED when building (Microsoft.Scripting) and update the
public key in ScriptEnvironmentSetup.cs which currently looks like:

 

#if SIGNED

                    new
LanguageProviderSetup("IronPython.Hosting.PythonLanguageProvider",
"IronPython,
Version=2.0.0.400, Culture=neutral, PublicKeyToken=31bf3856ad364e35",
".py",
"py", "python", "ironpython"),

                    new
LanguageProviderSetup("Microsoft.JScript.Compiler.Hosting.LanguageProvider",
"Microsoft.JScript.Compiler, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35", ".jsx", ".js",
"managedjscript", "js",
"jscript"),

                    new
LanguageProviderSetup("Ruby.Hosting.RubyLanguageProvider", "Ruby,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35",
".rb",
"rb", "ruby", "ironruby"),

                    new
LanguageProviderSetup("Microsoft.VisualBasic.Scripting.Hosting.VisualBasicLangu
ageProvider", "Microsoft.VisualBasic.Scripting, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35", ".vbx",
"vbx"),

#else

                    new
LanguageProviderSetup("IronPython.Hosting.PythonLanguageProvider",
"IronPython", ".py", "py", "python",
"ironpython"),

                    new
LanguageProviderSetup("Microsoft.JScript.Compiler.Hosting.LanguageProvider",
"Microsoft.JScript.Compiler", ".jsx", ".js",
"managedjscript", "js",
"jscript"),

                    new
LanguageProviderSetup("Microsoft.VisualBasic.Scripting.Hosting.VisualBasicLangu
ageProvider", "Microsoft.VisualBasic.Scripting",
".vbx", "vbx"),

                    new
LanguageProviderSetup("Ruby.Hosting.RubyLanguageProvider",
"Ruby", ".rb", "rb",
"ruby", "ironruby")

#endif

 

 

 

 

From: ironruby-core-bounces at rubyforge.org
[mailto:ironruby-core-bounces at rubyforge.org] On Behalf Of Stefan H?ttenrauch
Sent: Wednesday, September 26, 2007 9:29 AM
To: ironruby-core at rubyforge.org
Subject: [Ironruby-core] problems with strongly named assemblies

 

Hi together,


I tried to assign a strong name to the IronRuby DLLs to be used with
Sharepoint.
Therefore I opened the IronRuby.sln in VS2005 and changed the properties of
every reference project to use src/microsoft.scripting/DebugKey.snk as a
keyfile to sign the assembly, b/c it was the only key file I found.
Doing so I got an error message building the solution (Referenced Assembly Ruby
does not have a strong name). So it seems that signing the Ruby
project/assembly doesn''t work.

My second attempt was to generate a new keypair with sn.exe referencing it in
the ruby project properties and treating it isolated from the IronRuby
solution. No success.

I then tried ildasm followed by ilasm using a self-generated keypair file for
the Microsoft.Scripting.dll first and after another build the Ruby.dll. It
worked, at least I could copy the dlls to my global assembly cache. But!!
Referencing both dlls in a VS2005 project threw the following exception right
after starting the application:
Could not load file or assembly ''Microsoft.Scripting,
Version=1.0.0.400,
Culture=neutral, PublicKeyToken=null'' or one of its dependencies. A
strongly-named assembly is required.

Now I am wondering why something is still asking for an assembly with
PublicKeyToken=null, since both Ruby.dll and Microsoft.Scripting.dll are signed
with a strong name.

Do you have any advice?
Did I take the wrong way somewhere?

Looking forward to an answer...
Stefan

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://rubyforge.org/pipermail/ironruby-core/attachments/20070927/a442ce05/attachment.html

Ironruby core - Sep 2007 - problems with new rakefile require 'pathname2'

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with strongly named assemblies

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with strongly named assemblies

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with strongly named assemblies

[Ironruby-core] problems with new rakefile require ''pathname2''

[Ironruby-core] problems with strongly named assemblies