Hi Mark,
Add extensions to all of your mountpoints for the appropriate audio
codec/format you're using.
For example, <mount-name>/test.opus</mount-name> for an Ogg/Opus
stream.
Don't forget to add extensions in the <fallback-mount> sections, too.
I didn't look too closely at your config otherwise, that error was
standing out.
Cheers,
Jordan
P.S. Please 'reply-all' so list can get your replies as well :}
---
On 11/01/2016 03:12 PM, Mark wrote:> Hi many thanks here is the code
>
>
>
> <limits>
> <clients>100</clients>
> <sources>2</sources>
> <queue-size>524288</queue-size>
> <client-timeout>30</client-timeout>
> <header-timeout>15</header-timeout>
> <source-timeout>10</source-timeout>
> <!-- If enabled, this will provide a burst of data when a client
> first connects, thereby significantly reducing the startup
> time for listeners that do substantial buffering. However,
> it also significantly increases latency between the source
> client and listening client. For low-latency setups, you
> might want to disable this. -->
> <burst-on-connect>1</burst-on-connect>
> <!-- same as burst-on-connect, but this allows for being more
> specific on how much to burst. Most people won't need to
> change from the default 64k. Applies to all mountpoints -->
> <burst-size>65535</burst-size>
> </limits>
>
> <mount>
> <mount-name>/test</mount-name>
> </mount>
> <mount>
> <mount-name>/autodj</mount-name>
> <hidden>0</hidden>
> </mount>
> <mount>
> <mount-name>/live</mount-name>
> <fallback-mount>/autodj</fallback-mount>
> <fallback-override>1</fallback-override>
> <hidden>0</hidden>
> </mount>
> <mount>
> <mount-name>/listen</mount-name>
> <fallback-mount>/live</fallback-mount>
> <fallback-override>1</fallback-override>
> <hidden>0</hidden>
> </mount>
>
> <!-- Uncomment this if you want directory listings -->
> <!--
> <directory>
> <yp-url-timeout>15</yp-url-timeout>
> <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
> </directory>
> -->
>
> <!-- You may have multiple <listener> elements -->
> <listen-socket>
> <port>8000</port>
> <!-- <bind-address>127.0.0.1</bind-address> -->
> <!-- <shoutcast-mount>/stream</shoutcast-mount>
-->
> </listen-socket>
> <!--
> <listen-socket>
> <port>8080</port>
> </listen-socket>
> -->
> <!--
> <listen-socket>
> <port>8443</port>
> <ssl>1</ssl>s
> </listen-socket>
> -->
>
>
> <!-- Global header settings
> Headers defined here will be returned for every HTTP request to
> Icecast.
>
> The ACAO header makes Icecast public content/API by default
> This will make streams easier embeddable (some HTML5
> functionality needs it).
> Also it allows direct access to e.g. /status-json.xsl from other
> sites.
> If you don't want this, comment out the following line or read
> up on CORS.
> -->
> <http-headers>
> <header name="Access-Control-Allow-Origin"
value="*" />
> </http-headers>
>
>
> <!-- Relaying
> You don't need this if you only have one server.
> Please refer to the config for a detailed explanation.
> -->
> <!--<master-server>127.0.0.1</master-server>-->
> <!--<master-server-port>8001</master-server-port>-->
>
<!--<master-update-interval>120</master-update-interval>-->
> <!--<master-password>hackme</master-password>-->
>
> <!-- setting this makes all relays on-demand unless overridden, this
is
> useful for master relays which do not have <relay>
definitions
> here.
> The default is 0 -->
> <!--<relays-on-demand>1</relays-on-demand>-->
>
> <!--
> <relay>
> <server>127.0.0.1</server>
> <port>8080</port>
> <mount>/example.ogg</mount>
> <local-mount>/different.ogg</local-mount>
> <on-demand>0</on-demand>
>
> <relay-shoutcast-metadata>0</relay-shoutcast-metadata>
> </relay>
> -->
>
>
> <!-- Mountpoints
> Only define <mount> sections if you want to use advanced
options,
> like alternative usernames or passwords
> -->
>
> <!-- Default settings for all mounts that don't have a specific
> <mount type="normal">.
> -->
> <!-- <mount type="default">
> <public>0</public>
> <intro>/server-wide-intro.ogg</intro>
> <max-listener-duration>3600</max-listener-duration>
> <authentication type="url">
> <option name="mount_add"
> value="http://auth.example.org/stream_start.php"/>
> </authentication>
> <http-headers>
> <header name="foo" value="bar" />
> </http-headers>
> </mount>
> -->
>
> <!-- Normal mounts -->
> <!--
> <mount type="normal">
> <mount-name>/example-complex.ogg</mount-name>
>
> <username>othersource</username>
> <password>tafnuk2004</password>
>
> <max-listeners>1</max-listeners>
> <dump-file>/tmp/dump-example1.ogg</dump-file>
> <burst-size>65536</burst-size>
> <fallback-mount>/example2.ogg</fallback-mount>
> <fallback-override>1</fallback-override>
> <fallback-when-full>1</fallback-when-full>
> <intro>/example_intro.ogg</intro>
> <hidden>1</hidden>
> <public>1</public>
> <authentication type="htpasswd">
> <option name="filename"
value="myauth"/>
> <option name="allow_duplicate_users"
value="0"/>
> </authentication>
> <http-headers>
> <header name="Access-Control-Allow-Origin"
> value="http://webplayer.example.org" />
> <header name="baz" value="quux" />
> </http-headers>
> <on-connect>/home/icecast/bin/stream-start</on-connect>
>
<on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
> </mount>
> -->
>
> <!--
> <mount type="normal">
> <mount-name>/auth_example.ogg</mount-name>
> <authentication type="url">
> <option name="mount_add"
> value="http://myauthserver.net/notify_mount.php"/>
> <option name="mount_remove"
> value="http://myauthserver.net/notify_mount.php"/>
> <option name="listener_add"
> value="http://myauthserver.net/notify_listener.php"/>
> <option name="listener_remove"
> value="http://myauthserver.net/notify_listener.php"/>
> <option name="headers"
value="x-pragma,x-token"/>
> <option name="header_prefix"
value="ClientHeader."/>
> </authentication>
> </mount>
> -->
>
> <fileserve>1</fileserve>
>
> <paths>
> <!-- basedir is only used if chroot is enabled -->
> <basedir>/usr/share/icecast2</basedir>
>
> <!-- Note that if <chroot> is turned on below, these paths
must both
> be relative to the new root, not the original root -->
> <logdir>/var/log/icecast2</logdir>
> <webroot>/usr/share/icecast2/web</webroot>
> <adminroot>/usr/share/icecast2/admin</adminroot>
> <!--
<pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->
>
> <!-- Aliases: treat requests for 'source' path as being
for
> 'dest' path
> May be made specific to a port or bound address using the
> "port"
> and "bind-address" attributes.
> -->
> <!--
> <alias source="/foo" destination="/bar"/>
> -->
> <!-- Aliases: can also be used for simple redirections as well,
> this example will redirect all requests for
> http://server:port/ to
> the status page
> -->
> <alias source="/"
destination="/status.xsl"/>
> <!-- The certificate file needs to contain both public and
> private part.
> Both should be PEM encoded.
>
<ssl-certificate>/usr/share/icecast2/icecast.pem</ssl-certificate>
> -->
> </paths>
>
> <logging>
> <accesslog>access.log</accesslog>
> <errorlog>error.log</errorlog>
> <!-- <playlistlog>playlist.log</playlistlog> -->
> <loglevel>3</loglevel> <!-- 4 Debug, 3 Info, 2 Warn,
1 Error -->
> <logsize>10000</logsize> <!-- Max size of a logfile
-->
> <!-- If logarchive is enabled (1), then when logsize is reached
> the logfile will be moved to
> [error|access|playlist].log.DATESTAMP,
> otherwise it will be moved to [error|access|playlist].log.old.
> Default is non-archive mode (i.e. overwrite)
> -->
> <!-- <logarchive>1</logarchive> -->
> </logging>
>
> <security>
> <chroot>0</chroot>
> <!--
> <changeowner>
> <user>nobody</user>
> <group>nogroup</group>
> </changeowner>
> -->
> </security>
> </icecast>
>
>
>
> -----Original Message----- From: Jordan Erickson
> Sent: Tuesday, November 1, 2016 7:26 PM
> To: Mark ; Icecast streaming server user discussions
> Subject: Re: [Icecast] Icecast mount points help
>
> Hi Mark, can you please post <mount> configuration (omit sensitive
info
> if needed)? Could be a few different things.
>
>
> Cheers,
> Jordan
>
> On 11/01/2016 12:20 PM, Mark wrote:
>> Hi i have a problem
>> if a DJ is streaming no one can connect to the test mount
>> my setup is as follows
>> i have a pc streaming 24 hours a day 7 days a week with mount point
>> autodj
>> then all the djs are connected using live
>> then i have another mount called test
>> if no one is streaming live then djs can connect to the test mount but
>> if any one is connected live no one can use the test mount
>> can any one tell me where i am going wrong
>> Mark.
>>
>>
>> _______________________________________________
>> Icecast mailing list
>> Icecast at xiph.org
>> http://lists.xiph.org/mailman/listinfo/icecast
>>
>
--
Jordan Erickson (PGP: 0x78DD41CB)
Logical Networking Solutions, 707-636-5678