El dom, 10-02-2013 a las 10:07 +0200, R?cker Thomas escribi?:> Hi, > > On 10/02/13 06:53, Jos? Luis Artuch wrote: > > > > > I'm understanding why Icecast2 is an audio server, wow !!! > > http://www.icecast.org/docs/icecast-2.0.1/icecast2_config_file.html > > > > > We're not an 'audio server', that's pulse-audio, esd, etc. territory. > We're a multimedia streaming server. Slight difference. :) >Hello Thomas. That is, I agree, I was paying attention to only one part ! :)) A few days ago I was surprised to see how easily the mountpoints are created, even video.> > > > Testing the relay option: > > Two mountpoints from two master servers are relayed to a relay > > server: > > > > Master Servers > > Relay Server > > > > > > http://186.56.96.133:8200/zuzenean.ogg > > > > http://186.148.147.191:8001/zuzenean.ogg ---> > > http://186.56.96.133:8200/zznn1.ogg > > http://ubuntu.hbr1.com:19800/ambient.ogg ---> > > http://186.56.96.133:8200/zznn2.ogg > > > > I guess there is no limit for the number of signals to be relayed. > > > There should be no limit to the number of relays, or at least it will > be much higher than people will usually go... > BUT, did you check the source connection limit? Default is 2 or 3 and > you might be running into that (relays should count as sources too > IIRC). > Generally it helps to read the error.log to see what is happening. >Exactly, the relays are considered as sources and I had to increase the number of sources. If the number of sources is less than needed, the Relay Server sources take precedence over the Master Servers sources (I should try this again).> > > > A mountpoint name with less than three characters does not > > work !! ... uuffff ... ("xx.ogg" does not work, "xxx.ogg" works). > > > hmh? Can you be more specific about how I can reproduce this here? > This sounds like a possible bug. >Now I'm thinking that when "xx.ogg" not work may have been <on_demand> seted in "1" and this may have been the reason that did not occur the mountpoint (I should try this again). During the test I had the Relay Server with a mountpoint due to Ices2 (both running on the same machine) and two Master Servers with relayed mountpoints (two separate machines).> > > > What about <on-demand> 0 </ on-demand> ?. I used "0" and "1" but I > > did not notice changes. > > > If set to 1, this will make Icecast only pull in the relay if there > are also listeners connected to the stream locally. > > HTH > > Thomas >At this time I can but I SHOULD NOT DO tests on the servers :))) I will try tomorrow morning. Thank you very much !! Jos? Luis> > El s?b, 09-02-2013 a las 23:01 -0300, Jos? Luis Artuch escribi?: > > > > > Ah ... thanks Dave, will give light to the subject: > > > <relay> > > > <server>127.0.0.1</server> > > > <port>8001</port> > > > <mount>/example.ogg</mount> > > > <local-mount>/different.ogg</local-mount> > > > <on-demand>0</on-demand> > > > > > > <relay-shoutcast-metadata>0</relay-shoutcast-metadata> > > > </relay> > > > > > > El s?b, 09-02-2013 a las 20:52 -0500, Dave Pascoe escribi?: > > > > > > > You are looking for the <relay> element not <proxy> > > > > > > > > > > > > > > > > > > > > On Sat, Feb 9, 2013 at 8:48 PM, Jos? Luis Artuch > > > > <artuch at speedy.com.ar> wrote: > > > > > > > > Ok Xabier, thank you very much. > > > > I do not find a <proxy> section in the config file, but > > > > I will investigate a bit about this. > > > > > > > > El dom, 10-02-2013 a las 00:17 +0100, Xabier Oneca -- > > > > xOneca escribi?: > > > > > > > > > > > > > I was trying to tell you so. I'm not at home, so I > > > > > can't tell you exactly how it is done, but I remember > > > > > a <proxy> section in Icecast config file where you can > > > > > tell the source stream and where to mount locally. > > > > > > > > > > But as I have said before, see the Icecast > > > > > documentation for more details (or perhaps the > > > > > original config file also has comments for configuring > > > > > it). > > > > > > > > > > El 10/02/2013 00:12, "Jos? Luis Artuch" > > > > > <artuch at speedy.com.ar> escribi?: > > > > > > > > > > Xabier, I mean vlc + Ices2 + Icecast2, I do > > > > > not know because I do not work with Windows. > > > > > Very interesting a proxi with Icecast2, I will > > > > > study. I have saved a lot of work, why do not > > > > > you tell me before ? :)) > > > > > > > > > > El s?b, 09-02-2013 a las 23:28 +0100, Xabier > > > > > Oneca -- xOneca escribi?: > > > > > > > > > > > But you don't need VLC nor Ices2 to build a > > > > > > proxy with Icecast. It can connect to a > > > > > > stream and proxy it. I have tested it with a > > > > > > SHOUTCast server proxied through an Icecast > > > > > > mount point. > > > > > > > > > > > > Why shouldn't work in Windows? > > > > > > > > > > > > El 09/02/2013 22:43, "Jos? Luis Artuch" > > > > > > <artuch at speedy.com.ar> escribi?: > > > > > > > > > > > > Perhaps I've done something similar > > > > > > but on Debian and not know if it > > > > > > will work in Windows. > > > > > > I've used vlc to receive any audio > > > > > > from the Internet and ices2 as a > > > > > > source client. It works perfectly > > > > > > fine as a repeater. > > > > > > > > > > > > El s?b, 09-02-2013 a las 22:23 > > > > > > +0100, Xabier Oneca -- xOneca > > > > > > escribi?: > > > > > > > > > > > > > Is the stream a MP3 stream? If so, > > > > > > > you can use Icecast as a proxy > > > > > > > (see documentation). > > > > > > > > > > > > > > El 09/02/2013 22:05, "Michael > > > > > > > Renner" <michael.renner at gmx.de> > > > > > > > escribi?: > > > > > > > > > > > > > > Moin, > > > > > > > > > > > > > > I compiled icecast under > > > > > > > cygwin (yes, I have to use > > > > > > > Windows 7 togehter with > > > > > > > cygwin). > > > > > > > > > > > > > > The audio stream that I > > > > > > > want to distribute come > > > > > > > from stdin, like I get it > > > > > > > from > > > > > > > > > > > > > > curl > > > > > > > http://streamingserver.foo.bar/stream/stream.php | > > > > > > > > > > > > > > But how to proceed? Should > > > > > > > I just pipe this to | > > > > > > > icecast -c > > > > > > > etc/icecast.xml? > > > > > > > It does not work. > > > > > > > > > > > > > > Thanks for any hint! > > > > > > > -- > > > > > > > |Michael Renner > > > > > > > E-mail: > > > > > > > michael.renner at gmx.de | > > > > > > > |81541 Munich > > > > > > > skype: > > > > > > > michael.renner.gmx.de | > > > > > > > |Germany Don't > > > > > > > drink as root! ESC:wq > > > > > > > _______________________________________________ > > > > > > > Icecast mailing list > > > > > > > Icecast at xiph.org > > > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > _______________________________________________ > > > > > > > Icecast mailing list > > > > > > > Icecast at xiph.org > > > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Icecast mailing list > > > > Icecast at xiph.org > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Icecast mailing list > > > Icecast at xiph.org > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > _______________________________________________ > Icecast mailing list > Icecast at xiph.org > http://lists.xiph.org/mailman/listinfo/icecast-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/icecast/attachments/20130210/9125edef/attachment.htm
El dom, 10-02-2013 a las 17:47 -0300, Jos? Luis Artuch escribi?:> El dom, 10-02-2013 a las 10:07 +0200, R?cker Thomas escribi?: > > > Hi, > > > > On 10/02/13 06:53, Jos? Luis Artuch wrote: > > > > > > > I'm understanding why Icecast2 is an audio server, wow !!! > > > http://www.icecast.org/docs/icecast-2.0.1/icecast2_config_file.html > > > > > > > > > We're not an 'audio server', that's pulse-audio, esd, etc. > > territory. > > We're a multimedia streaming server. Slight difference. :) > > > > > Hello Thomas. > That is, I agree, I was paying attention to only one part ! :)) > A few days ago I was surprised to see how easily the mountpoints are > created, even video. > > > > > > > > > Testing the relay option: > > > Two mountpoints from two master servers are relayed to a relay > > > server: > > > > > > Master Servers > > > Relay Server > > > > > > > > > http://186.56.96.133:8200/zuzenean.ogg > > > > > > http://186.148.147.191:8001/zuzenean.ogg ---> > > > http://186.56.96.133:8200/zznn1.ogg > > > http://ubuntu.hbr1.com:19800/ambient.ogg ---> > > > http://186.56.96.133:8200/zznn2.ogg > > > > > > I guess there is no limit for the number of signals to be relayed. > > > > > > There should be no limit to the number of relays, or at least it > > will be much higher than people will usually go... > > BUT, did you check the source connection limit? Default is 2 or 3 > > and you might be running into that (relays should count as sources > > too IIRC). > > Generally it helps to read the error.log to see what is happening. > > > > > Exactly, the relays are considered as sources and I had to increase > the number of sources. > If the number of sources is less than needed, the Relay Server sources > take precedence over the Master Servers sources (I should try this > again). >It seems so. To gradually reduce the number of sources are deleted relayed mountpoints.> > > > > > > A mountpoint name with less than three characters does not > > > work !! ... uuffff ... ("xx.ogg" does not work, "xxx.ogg" works). > > > > > > hmh? Can you be more specific about how I can reproduce this here? > > This sounds like a possible bug. > > > > > Now I'm thinking that when "xx.ogg" not work may have been <on_demand> > seted in "1" and this may have been the reason that did not occur the > mountpoint (I should try this again). > During the test I had the Relay Server with a mountpoint due to Ices2 > (both running on the same machine) and two Master Servers with relayed > mountpoints (two separate machines). >Again, now four mountpoints. One from the Relay Server and three relayed from two Masters Servers. The names of the mountpoints are very short and everything works ok, even without an extension (http://186.56.96.133:8000). During the previous test <on_demand> must have been set to "1" ... :( ... excuse me !!!! Master Servers Relay Server http://186.56.96.133:8000/zuzenean.ogg http://186.148.147.191:8001/zuzenean.ogg ---> http://186.56.96.133:8000/a.ogg http://ubuntu.hbr1.com:19800/ambient.ogg ---> http://186.56.96.133:8000/b.ogg http://ubuntu.hbr1.com:19800/ambient.ogg ---> http://186.56.96.133:8000/2> > > > > > > What about <on-demand> 0 </ on-demand> ?. I used "0" and "1" but I > > > did not notice changes. > > > > > > If set to 1, this will make Icecast only pull in the relay if there > > are also listeners connected to the stream locally. > > > > HTH > > > > Thomas > > > > > At this time I can but I SHOULD NOT DO tests on the servers :))) I > will try tomorrow morning. > Thank you very much !! > Jos? Luis > > > > > El s?b, 09-02-2013 a las 23:01 -0300, Jos? Luis Artuch escribi?: > > > > > > > Ah ... thanks Dave, will give light to the subject: > > > > <relay> > > > > <server>127.0.0.1</server> > > > > <port>8001</port> > > > > <mount>/example.ogg</mount> > > > > <local-mount>/different.ogg</local-mount> > > > > <on-demand>0</on-demand> > > > > > > > > <relay-shoutcast-metadata>0</relay-shoutcast-metadata> > > > > </relay> > > > > > > > > El s?b, 09-02-2013 a las 20:52 -0500, Dave Pascoe escribi?: > > > > > > > > > You are looking for the <relay> element not <proxy> > > > > > > > > > > > > > > > > > > > > > > > > > On Sat, Feb 9, 2013 at 8:48 PM, Jos? Luis Artuch > > > > > <artuch at speedy.com.ar> wrote: > > > > > > > > > > Ok Xabier, thank you very much. > > > > > I do not find a <proxy> section in the config file, > > > > > but I will investigate a bit about this. > > > > > > > > > > El dom, 10-02-2013 a las 00:17 +0100, Xabier Oneca -- > > > > > xOneca escribi?: > > > > > > > > > > > > > > > > I was trying to tell you so. I'm not at home, so I > > > > > > can't tell you exactly how it is done, but I > > > > > > remember a <proxy> section in Icecast config file > > > > > > where you can tell the source stream and where to > > > > > > mount locally. > > > > > > > > > > > > But as I have said before, see the Icecast > > > > > > documentation for more details (or perhaps the > > > > > > original config file also has comments for > > > > > > configuring it). > > > > > > > > > > > > El 10/02/2013 00:12, "Jos? Luis Artuch" > > > > > > <artuch at speedy.com.ar> escribi?: > > > > > > > > > > > > Xabier, I mean vlc + Ices2 + Icecast2, I do > > > > > > not know because I do not work with Windows. > > > > > > Very interesting a proxi with Icecast2, I > > > > > > will study. I have saved a lot of work, why > > > > > > do not you tell me before ? :)) > > > > > > > > > > > > El s?b, 09-02-2013 a las 23:28 +0100, Xabier > > > > > > Oneca -- xOneca escribi?: > > > > > > > > > > > > > But you don't need VLC nor Ices2 to build > > > > > > > a proxy with Icecast. It can connect to a > > > > > > > stream and proxy it. I have tested it with > > > > > > > a SHOUTCast server proxied through an > > > > > > > Icecast mount point. > > > > > > > > > > > > > > Why shouldn't work in Windows? > > > > > > > > > > > > > > El 09/02/2013 22:43, "Jos? Luis Artuch" > > > > > > > <artuch at speedy.com.ar> escribi?: > > > > > > > > > > > > > > Perhaps I've done something > > > > > > > similar but on Debian and not know > > > > > > > if it will work in Windows. > > > > > > > I've used vlc to receive any audio > > > > > > > from the Internet and ices2 as a > > > > > > > source client. It works perfectly > > > > > > > fine as a repeater. > > > > > > > > > > > > > > El s?b, 09-02-2013 a las 22:23 > > > > > > > +0100, Xabier Oneca -- xOneca > > > > > > > escribi?: > > > > > > > > > > > > > > > Is the stream a MP3 stream? If > > > > > > > > so, you can use Icecast as a > > > > > > > > proxy (see documentation). > > > > > > > > > > > > > > > > El 09/02/2013 22:05, "Michael > > > > > > > > Renner" <michael.renner at gmx.de> > > > > > > > > escribi?: > > > > > > > > > > > > > > > > Moin, > > > > > > > > > > > > > > > > I compiled icecast under > > > > > > > > cygwin (yes, I have to > > > > > > > > use Windows 7 togehter > > > > > > > > with > > > > > > > > cygwin). > > > > > > > > > > > > > > > > The audio stream that I > > > > > > > > want to distribute come > > > > > > > > from stdin, like I get > > > > > > > > it from > > > > > > > > > > > > > > > > curl > > > > > > > > http://streamingserver.foo.bar/stream/stream.php | > > > > > > > > > > > > > > > > But how to proceed? > > > > > > > > Should I just pipe this > > > > > > > > to | icecast -c > > > > > > > > etc/icecast.xml? > > > > > > > > It does not work. > > > > > > > > > > > > > > > > Thanks for any hint! > > > > > > > > -- > > > > > > > > |Michael Renner > > > > > > > > E-mail: > > > > > > > > michael.renner at gmx.de | > > > > > > > > |81541 Munich > > > > > > > > skype: > > > > > > > > michael.renner.gmx.de > > > > > > > > | > > > > > > > > |Germany > > > > > > > > Don't drink as root! > > > > > > > > ESC:wq > > > > > > > > _______________________________________________ > > > > > > > > Icecast mailing list > > > > > > > > Icecast at xiph.org > > > > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > Icecast mailing list > > > > > > > > Icecast at xiph.org > > > > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Icecast mailing list > > > > > Icecast at xiph.org > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Icecast mailing list > > > > Icecast at xiph.org > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > _______________________________________________ > > Icecast mailing list > > Icecast at xiph.org > > http://lists.xiph.org/mailman/listinfo/icecast > > > > _______________________________________________ > Icecast mailing list > Icecast at xiph.org > http://lists.xiph.org/mailman/listinfo/icecast-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/icecast/attachments/20130211/4ee1a6c8/attachment-0001.htm
El lun, 11-02-2013 a las 10:58 -0300, Jos? Luis Artuch escribi?:> El dom, 10-02-2013 a las 17:47 -0300, Jos? Luis Artuch escribi?: > > > El dom, 10-02-2013 a las 10:07 +0200, R?cker Thomas escribi?: > > > > > Hi, > > > > > > On 10/02/13 06:53, Jos? Luis Artuch wrote: > > > > > > > > > > I'm understanding why Icecast2 is an audio server, wow !!! > > > > http://www.icecast.org/docs/icecast-2.0.1/icecast2_config_file.html > > > > > > > > > > > > > We're not an 'audio server', that's pulse-audio, esd, etc. > > > territory. > > > We're a multimedia streaming server. Slight difference. :) > > > > > > > > > Hello Thomas. > > That is, I agree, I was paying attention to only one part ! :)) > > A few days ago I was surprised to see how easily the mountpoints are > > created, even video. > > > > > > > > > > > > > > Testing the relay option: > > > > Two mountpoints from two master servers are relayed to a relay > > > > server: > > > > > > > > Master Servers > > > > Relay Server > > > > > > > > > > > > http://186.56.96.133:8200/zuzenean.ogg > > > > > > > > http://186.148.147.191:8001/zuzenean.ogg ---> > > > > http://186.56.96.133:8200/zznn1.ogg > > > > http://ubuntu.hbr1.com:19800/ambient.ogg ---> > > > > http://186.56.96.133:8200/zznn2.ogg > > > > > > > > I guess there is no limit for the number of signals to be > > > > relayed. > > > > > > > > > There should be no limit to the number of relays, or at least it > > > will be much higher than people will usually go... > > > BUT, did you check the source connection limit? Default is 2 or 3 > > > and you might be running into that (relays should count as sources > > > too IIRC). > > > Generally it helps to read the error.log to see what is happening. > > > > > > > > > Exactly, the relays are considered as sources and I had to increase > > the number of sources. > > If the number of sources is less than needed, the Relay Server > > sources take precedence over the Master Servers sources (I should > > try this again). > > > > > It seems so. To gradually reduce the number of sources are deleted > relayed mountpoints. > > > > > > > > > > > > A mountpoint name with less than three characters does not > > > > work !! ... uuffff ... ("xx.ogg" does not work, "xxx.ogg" > > > > works). > > > > > > > > > hmh? Can you be more specific about how I can reproduce this here? > > > This sounds like a possible bug. > > > > > > > > > Now I'm thinking that when "xx.ogg" not work may have been > > <on_demand> seted in "1" and this may have been the reason that did > > not occur the mountpoint (I should try this again). > > During the test I had the Relay Server with a mountpoint due to > > Ices2 (both running on the same machine) and two Master Servers with > > relayed mountpoints (two separate machines). > > > > > Again, now four mountpoints. One from the Relay Server and three > relayed from two Masters Servers. > The names of the mountpoints are very short and everything works ok, > even without an extension (http://186.56.96.133:8000). > During the previous test <on_demand> must have been set to > "1" ... :( ... excuse me !!!! > > Master Servers > Relay Server > > > http://186.56.96.133:8000/zuzenean.ogg > > http://186.148.147.191:8001/zuzenean.ogg ---> > http://186.56.96.133:8000/a.ogg > http://ubuntu.hbr1.com:19800/ambient.ogg ---> > http://186.56.96.133:8000/b.ogg > http://ubuntu.hbr1.com:19800/ambient.ogg ---> > http://186.56.96.133:8000/2 >Is 8200 !!!!!! :))) ... http://186.56.96.133:8200 Master Servers Relay Server http://186.56.96.133:8200/zuzenean.ogg http://186.148.147.191:8001/zuzenean.ogg ---> http://186.56.96.133:8200/a.ogg http://ubuntu.hbr1.com:19800/ambient.ogg ---> http://186.56.96.133:8200/b.ogg http://ubuntu.hbr1.com:19800/ambient.ogg ---> ttp://186.56.96.133:8200/2> > > > > > > > > > What about <on-demand> 0 </ on-demand> ?. I used "0" and "1" but > > > > I did not notice changes. > > > > > > > > > If set to 1, this will make Icecast only pull in the relay if > > > there are also listeners connected to the stream locally. > > > > > > HTH > > > > > > Thomas > > > > > > > > > At this time I can but I SHOULD NOT DO tests on the servers :))) I > > will try tomorrow morning. > > Thank you very much !! > > Jos? Luis > > > > > > > > El s?b, 09-02-2013 a las 23:01 -0300, Jos? Luis Artuch escribi?: > > > > > > > > > Ah ... thanks Dave, will give light to the subject: > > > > > <relay> > > > > > <server>127.0.0.1</server> > > > > > <port>8001</port> > > > > > <mount>/example.ogg</mount> > > > > > <local-mount>/different.ogg</local-mount> > > > > > <on-demand>0</on-demand> > > > > > > > > > > <relay-shoutcast-metadata>0</relay-shoutcast-metadata> > > > > > </relay> > > > > > > > > > > El s?b, 09-02-2013 a las 20:52 -0500, Dave Pascoe escribi?: > > > > > > > > > > > You are looking for the <relay> element not <proxy> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Sat, Feb 9, 2013 at 8:48 PM, Jos? Luis Artuch > > > > > > <artuch at speedy.com.ar> wrote: > > > > > > > > > > > > Ok Xabier, thank you very much. > > > > > > I do not find a <proxy> section in the config file, > > > > > > but I will investigate a bit about this. > > > > > > > > > > > > El dom, 10-02-2013 a las 00:17 +0100, Xabier Oneca > > > > > > -- xOneca escribi?: > > > > > > > > > > > > > > > > > > > I was trying to tell you so. I'm not at home, so I > > > > > > > can't tell you exactly how it is done, but I > > > > > > > remember a <proxy> section in Icecast config file > > > > > > > where you can tell the source stream and where to > > > > > > > mount locally. > > > > > > > > > > > > > > But as I have said before, see the Icecast > > > > > > > documentation for more details (or perhaps the > > > > > > > original config file also has comments for > > > > > > > configuring it). > > > > > > > > > > > > > > El 10/02/2013 00:12, "Jos? Luis Artuch" > > > > > > > <artuch at speedy.com.ar> escribi?: > > > > > > > > > > > > > > Xabier, I mean vlc + Ices2 + Icecast2, I > > > > > > > do not know because I do not work with > > > > > > > Windows. > > > > > > > Very interesting a proxi with Icecast2, I > > > > > > > will study. I have saved a lot of work, > > > > > > > why do not you tell me before ? :)) > > > > > > > > > > > > > > El s?b, 09-02-2013 a las 23:28 +0100, > > > > > > > Xabier Oneca -- xOneca escribi?: > > > > > > > > > > > > > > > But you don't need VLC nor Ices2 to > > > > > > > > build a proxy with Icecast. It can > > > > > > > > connect to a stream and proxy it. I have > > > > > > > > tested it with a SHOUTCast server > > > > > > > > proxied through an Icecast mount point. > > > > > > > > > > > > > > > > Why shouldn't work in Windows? > > > > > > > > > > > > > > > > El 09/02/2013 22:43, "Jos? Luis Artuch" > > > > > > > > <artuch at speedy.com.ar> escribi?: > > > > > > > > > > > > > > > > Perhaps I've done something > > > > > > > > similar but on Debian and not > > > > > > > > know if it will work in Windows. > > > > > > > > I've used vlc to receive any > > > > > > > > audio from the Internet and > > > > > > > > ices2 as a source client. It > > > > > > > > works perfectly fine as a > > > > > > > > repeater. > > > > > > > > > > > > > > > > El s?b, 09-02-2013 a las 22:23 > > > > > > > > +0100, Xabier Oneca -- xOneca > > > > > > > > escribi?: > > > > > > > > > > > > > > > > > Is the stream a MP3 stream? If > > > > > > > > > so, you can use Icecast as a > > > > > > > > > proxy (see documentation). > > > > > > > > > > > > > > > > > > El 09/02/2013 22:05, "Michael > > > > > > > > > Renner" > > > > > > > > > <michael.renner at gmx.de> > > > > > > > > > escribi?: > > > > > > > > > > > > > > > > > > Moin, > > > > > > > > > > > > > > > > > > I compiled icecast > > > > > > > > > under cygwin (yes, I > > > > > > > > > have to use Windows 7 > > > > > > > > > togehter with > > > > > > > > > cygwin). > > > > > > > > > > > > > > > > > > The audio stream that > > > > > > > > > I want to distribute > > > > > > > > > come from stdin, like > > > > > > > > > I get it from > > > > > > > > > > > > > > > > > > curl > > > > > > > > > http://streamingserver.foo.bar/stream/stream.php | > > > > > > > > > > > > > > > > > > But how to proceed? > > > > > > > > > Should I just pipe > > > > > > > > > this to | icecast -c > > > > > > > > > etc/icecast.xml? > > > > > > > > > It does not work. > > > > > > > > > > > > > > > > > > Thanks for any hint! > > > > > > > > > -- > > > > > > > > > |Michael Renner > > > > > > > > > E-mail: > > > > > > > > > michael.renner at gmx.de > > > > > > > > > | > > > > > > > > > |81541 Munich > > > > > > > > > skype: > > > > > > > > > michael.renner.gmx.de > > > > > > > > > | > > > > > > > > > |Germany > > > > > > > > > Don't drink as root! > > > > > > > > > ESC:wq > > > > > > > > > _______________________________________________ > > > > > > > > > Icecast mailing list > > > > > > > > > Icecast at xiph.org > > > > > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > Icecast mailing list > > > > > > > > > Icecast at xiph.org > > > > > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Icecast mailing list > > > > > > Icecast at xiph.org > > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Icecast mailing list > > > > > Icecast at xiph.org > > > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Icecast mailing list > > > Icecast at xiph.org > > > http://lists.xiph.org/mailman/listinfo/icecast > > > > > > > > _______________________________________________ > > Icecast mailing list > > Icecast at xiph.org > > http://lists.xiph.org/mailman/listinfo/icecast > > > > _______________________________________________ > Icecast mailing list > Icecast at xiph.org > http://lists.xiph.org/mailman/listinfo/icecast-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/icecast/attachments/20130211/65f3e40c/attachment-0001.htm