Hy,
I've just installed the latest release of icecast2 and ices from CVS.
I have a linux Slackware 9.0 with the default packages.
After install of ices and icecast & relative libraries (with no errors),
I've started the icecast server.
When starts ices, this is the debug:
---
INFO ices-core/main ices started...
INFO input-oss/oss_open_module Opened audio device /dev/dsp at 2 channel(s),
44100 Hz
INFO input-oss/oss_open_module Started metadata update thread
INFO signals/signal_usr1_handler Metadata update requested
INFO metadata/metadata_thread_signal tag 1 is TITLE=Live Radio Stations on the
net.
INFO metadata/metadata_thread_signal tag 2 is ARTIST=xxx
INFO metadata/metadata_thread_signal Updating metadata
INFO audio/downmix_initialise Enabling stereo->mono downmixing
INFO audio/resample_initialise Initialised resampler for 1 channels, from 44100
Hz to 22050 Hz
INFO encode/encode_initialise Encoder initialising in VBR mode: 1 channel(s),
22050 Hz, quality 1.000000
INFO stream/ices_instance_stream Connected to server:
viabazar.net:8000/radiokey.ogg
INFO audio/resample_initialise Initialised resampler for 1 channels, from 44100
Hz to 22050 Hz
DBUG encode/encode_clear Clearing encoder engine
INFO encode/encode_initialise Encoder initialising in VBR mode: 1 channel(s),
22050 Hz, quality 1.000000
---
go to the page
domain_name:8000/status.xsl
I see the mountpoint, the metadata and a link to listen the audio-live.
When I click in that link, starts the WINAMP 3 (the file m3u is associated with
winamp).
It's all OK...
Winamp stay connect to the server icecast, but I hear nothing !!!
The mixer channel have a right configuration (LINE-IN = volume 90% has Record
line!!!)
I've tested my sound card, with this comand (from SOX):
rec -s w -c 2 -r 44100 track-test.au
All is OK ... But from ICES I have no audio signal.
This is my ices.xml (the essentials):
---
<background>0</background> <!-- run in background?
(unimplemented) -->
<logpath>/tmp/local/icecast</logpath> <!-- where logs,
etc go. -->
<logfile>ices.log</logfile>
<loglevel>4</loglevel> <!-- 1=error,2=warn,3=info,4=debug
-->
<consolelog>1</consolelog> <!-- logfile is ignored if this is
set to 1 -->
<stream>
<!-- metadata used for stream listing (not currently used)
-->
<metadata>
<name>Example stream name</name>
<genre>Example genre</genre>
<description>A short description of your
stream</description>
</metadata>
<input>
<module>oss</module>
<param name="rate">44100</param>
<!-- samplerate -->
<param name="channels">2</param>
<!-- number of channels -->
<param
name="device">/dev/dsp</param> <!-- audio device -->
<param name="metadata">1</param>
<param
name="metadatafilename">/icecast/ices.conf/live</param>
</input>
<hostname>domain_name</hostname>
<port>8000</port>
<password>xxxxxxx</password>
<mount>/radiolive.ogg</mount>
<encode>
<quality>1</quality>
<samplerate>22050</samplerate>
<channels>1</channels>
</encode>
<downmix>1</downmix>
---
WHAT IS WRONG???
Many Thanks, in advance!
Paolo Remonato
--- >8 ----
List archives: http://www.xiph.org/archives/
icecast project homepage: http://www.icecast.org/
To unsubscribe from this list, send a message to
'icecast-request@xiph.org'
containing only the word 'unsubscribe' in the body. No subject is
needed.
Unsubscribe messages sent to the list will be ignored/filtered.
On Fri, 16 May 2003 at 13:02:49, photos-ifree wrote:> I've just installed the latest release of icecast2 and ices from CVS. > I have a linux Slackware 9.0 with the default packages. > After install of ices and icecast & relative libraries (with no errors), I've > started the icecast server.[...]> All is OK ... But from ICES I have no audio signal.I experienced the same problem yesterday. Tried sending an cbr-mp3 - but had the same results. Maybe there is something wrong in ices? Maybe could you do a little debugging which reveals if mp3-data is sent out by ices or not? Just grab the output-stream (which is sent to the server) in a file and try to play that one in WinAmp. Maybe also Brendan got a suggestion to this problem? <p>Greetingz Stefan --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe messages sent to the list will be ignored/filtered.
Hy,
I've found in the all version of SLACKWARE this package (in the default
installation of slack):
OGGUTILS ---- (oggutils-1.0.tgz)
What is this??? Is a part of "ogg-tools" modules from Xiph.org???
Is it possible that this "oggutils" do my problems???
The modules "ogg-tools" is necessary for live broadcast with ICES2 and
ICECAST2 ???
I'd noted that this package (oggutils) is only in the SLACKWARE dist
<p>Many Thanks to all Helper. :-)
Paolo
<p><p>Friday, May 16, 2003, 1:14:39 PM, you wrote:
pi> Hy,
pi> I've just installed the latest release of icecast2 and ices from CVS.
pi> I have a linux Slackware 9.0 with the default packages.
pi> After install of ices and icecast & relative libraries (with no
errors), I've started the icecast server.
pi> When starts ices, this is the debug:
pi> ---
pi> INFO ices-core/main ices started...
pi> INFO input-oss/oss_open_module Opened audio device /dev/dsp at 2
channel(s), 44100 Hz
pi> INFO input-oss/oss_open_module Started metadata update thread
pi> INFO signals/signal_usr1_handler Metadata update requested
pi> INFO metadata/metadata_thread_signal tag 1 is TITLE=Live Radio Stations
on the net.
pi> INFO metadata/metadata_thread_signal tag 2 is ARTIST=xxx
pi> INFO metadata/metadata_thread_signal Updating metadata
pi> INFO audio/downmix_initialise Enabling stereo->mono downmixing
pi> INFO audio/resample_initialise Initialised resampler for 1 channels,
from 44100 Hz to 22050 Hz
pi> INFO encode/encode_initialise Encoder initialising in VBR mode: 1
channel(s), 22050 Hz, quality 1.000000
pi> INFO stream/ices_instance_stream Connected to server:
viabazar.net:8000/radiokey.ogg
pi> INFO audio/resample_initialise Initialised resampler for 1 channels,
from 44100 Hz to 22050 Hz
pi> DBUG encode/encode_clear Clearing encoder engine
pi> INFO encode/encode_initialise Encoder initialising in VBR mode: 1
channel(s), 22050 Hz, quality 1.000000
pi> ---
pi> go to the page
pi> domain_name:8000/status.xsl
pi> I see the mountpoint, the metadata and a link to listen the audio-live.
pi> When I click in that link, starts the WINAMP 3 (the file m3u is
associated with winamp).
pi> It's all OK...
pi> Winamp stay connect to the server icecast, but I hear nothing !!!
pi> The mixer channel have a right configuration (LINE-IN = volume 90% has
Record line!!!)
pi> I've tested my sound card, with this comand (from SOX):
pi> rec -s w -c 2 -r 44100 track-test.au
pi> All is OK ... But from ICES I have no audio signal.
pi> This is my ices.xml (the essentials):
pi> ---
pi> <background>0</background> <!-- run in background?
(unimplemented) -->
pi> <logpath>/tmp/local/icecast</logpath> <!-- where
logs, etc go. -->
pi> <logfile>ices.log</logfile>
pi> <loglevel>4</loglevel> <!--
1=error,2=warn,3=info,4=debug -->
pi> <consolelog>1</consolelog> <!-- logfile is ignored if
this is set to 1 -->
pi> <stream>
pi> <!-- metadata used for stream listing (not currently
used) -->
pi> <metadata>
pi> <name>Example stream name</name>
pi> <genre>Example genre</genre>
pi> <description>A short description of your
stream</description>
pi> </metadata>
pi> <input>
pi> <module>oss</module>
pi> <param
name="rate">44100</param> <!-- samplerate -->
pi> <param
name="channels">2</param> <!-- number of channels -->
pi> <param
name="device">/dev/dsp</param> <!-- audio device -->
pi> <param
name="metadata">1</param>
pi> <param
name="metadatafilename">/icecast/ices.conf/live</param>
pi> </input>
pi> <hostname>domain_name</hostname>
pi> <port>8000</port>
pi> <password>xxxxxxx</password>
pi> <mount>/radiolive.ogg</mount>
pi> <encode>
pi> <quality>1</quality>
pi>
<samplerate>22050</samplerate>
pi> <channels>1</channels>
pi> </encode>
pi> <downmix>1</downmix>
pi> ---
pi> WHAT IS WRONG???
pi> Many Thanks, in advance!
pi> Paolo Remonato
--- >>8 ----
pi> List archives: http://www.xiph.org/archives/
pi> icecast project homepage: http://www.icecast.org/
pi> To unsubscribe from this list, send a message to
'icecast-request@xiph.org'
pi> containing only the word 'unsubscribe' in the body. No subject
is needed.
pi> Unsubscribe messages sent to the list will be ignored/filtered.
<p><p>
--
Best regards,
photos-ifree mailto:photos@interfree.it
--- >8 ----
List archives: http://www.xiph.org/archives/
icecast project homepage: http://www.icecast.org/
To unsubscribe from this list, send a message to
'icecast-request@xiph.org'
containing only the word 'unsubscribe' in the body. No subject is
needed.
Unsubscribe messages sent to the list will be ignored/filtered.
On Fri, 16 May 2003, photos-ifree wrote:> When I click in that link, starts the WINAMP 3 (the file m3u is associated with winamp). > It's all OK... > Winamp stay connect to the server icecast, but I hear nothing !!!I understand that Vorbis streaming in Winamp 3 is broken. Winamp 3 is now discontinued anyway. You can get Winamp 2.91 from classic.winamp.com. Geoff. <p><p>--- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe messages sent to the list will be ignored/filtered.
On Fri, 16 May 2003 at 13:15:22, Geoff Shang wrote:> I understand that Vorbis streaming in Winamp 3 is broken. Winamp 3 is now > discontinued anyway. You can get Winamp 2.91 from classic.winamp.com.What do you mean? Winamp 3 is discontinued? Will 2.x be continued? Where did you get that news from? --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe messages sent to the list will be ignored/filtered.
Hello, hmmmm sweet problem. All I can recommend you is have you tried another player? I've heard that WinAmp3 has certain problems with .ogg streaming. No other idea :(. Martin On Fri May 16 2003 11:14, photos-ifree wrote:> Hy, > I've just installed the latest release of icecast2 and ices from CVS. > I have a linux Slackware 9.0 with the default packages. > After install of ices and icecast & relative libraries (with no errors), > I've started the icecast server. When starts ices, this is the debug: > --- > INFO ices-core/main ices started... > INFO input-oss/oss_open_module Opened audio device /dev/dsp at 2 > channel(s), 44100 Hz INFO input-oss/oss_open_module Started metadata update > thread > INFO signals/signal_usr1_handler Metadata update requested > INFO metadata/metadata_thread_signal tag 1 is TITLE=Live Radio Stations on > the net. INFO metadata/metadata_thread_signal tag 2 is ARTIST=xxx > INFO metadata/metadata_thread_signal Updating metadata > INFO audio/downmix_initialise Enabling stereo->mono downmixing > INFO audio/resample_initialise Initialised resampler for 1 channels, from > 44100 Hz to 22050 Hz INFO encode/encode_initialise Encoder initialising in > VBR mode: 1 channel(s), 22050 Hz, quality 1.000000 INFO > stream/ices_instance_stream Connected to server: > viabazar.net:8000/radiokey.ogg INFO audio/resample_initialise Initialised > resampler for 1 channels, from 44100 Hz to 22050 Hz DBUG > encode/encode_clear Clearing encoder engine > INFO encode/encode_initialise Encoder initialising in VBR mode: 1 > channel(s), 22050 Hz, quality 1.000000 --- > > go to the page > domain_name:8000/status.xsl > I see the mountpoint, the metadata and a link to listen the audio-live. > > When I click in that link, starts the WINAMP 3 (the file m3u is associated > with winamp). It's all OK... > Winamp stay connect to the server icecast, but I hear nothing !!! > The mixer channel have a right configuration (LINE-IN = volume 90% has > Record line!!!) > > I've tested my sound card, with this comand (from SOX): > rec -s w -c 2 -r 44100 track-test.au > > All is OK ... But from ICES I have no audio signal. > This is my ices.xml (the essentials): > > --- > <background>0</background> <!-- run in background? (unimplemented) --> > <logpath>/tmp/local/icecast</logpath> <!-- where logs, etc go. --> > <logfile>ices.log</logfile> > <loglevel>4</loglevel> <!-- 1=error,2=warn,3=info,4=debug --> > <consolelog>1</consolelog> <!-- logfile is ignored if this is set to 1 > --> > > <stream> > <!-- metadata used for stream listing (not currently used) > --> <metadata> > <name>Example stream name</name> > <genre>Example genre</genre> > <description>A short description of your > stream</description> </metadata> > > <input> > <module>oss</module> > <param name="rate">44100</param> <!-- samplerate > --> <param name="channels">2</param> <!-- number of channels --> <param > name="device">/dev/dsp</param> <!-- audio device --> <param > name="metadata">1</param> > > <param > name="metadatafilename">/icecast/ices.conf/live</param> </input> > > <hostname>domain_name</hostname> > <port>8000</port> > <password>xxxxxxx</password> > <mount>/radiolive.ogg</mount> > > <encode> > <quality>1</quality> > <samplerate>22050</samplerate> > <channels>1</channels> > </encode> > > <downmix>1</downmix> > --- > > WHAT IS WRONG??? > > Many Thanks, in advance! > > Paolo Remonato > > --- >8 ---- > List archives: http://www.xiph.org/archives/ > icecast project homepage: http://www.icecast.org/ > To unsubscribe from this list, send a message to 'icecast-request@xiph.org' > containing only the word 'unsubscribe' in the body. No subject is needed. > Unsubscribe messages sent to the list will be ignored/filtered.-- Martin Hudec ---------------------------------- :@: corwin@corwin.sk :w: http://www.corwin.sk :m: +421.907.303.393 "In google non est, ergo non est." - unknown IRC operator ---------------------------------- --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe messages sent to the list will be ignored/filtered.
Hello Martin,
I've just change the player, now I've used ASHAMPOO Player Plus.
This is the error in the logs:
---
playing 'http://xxx.com:8000/radiolive.ogg'
Unable to play 'http://xxx.com:8000/radiolive.ogg'.
Reported errors:
VorbisSet (Ogg Vorbis files - *.ogg) - The initiated action ist not permitted on
this object. (file path: 'http://xxx.com:8000/radiolive.ogg')
ModSet (MOD music files) - Mod file error: Unknown file format
('http://xxx.com:8000/radiolive.ogg')
WaveSet (wave files) - unsupported file format
---
But the player is stay connect to the icecast server!
Is it possible that there are some errors in the configuration on ICES???
If I play an Ogg File (saved in my hard disk) with WINAMP there isn't any
error!
Thanks
Paolo
<p>Friday, May 16, 2003, 3:13:32 PM, you wrote:
MH> Hello,
MH> hmmmm sweet problem. All I can recommend you is have you tried another
player?
MH> I've heard that WinAmp3 has certain problems with .ogg streaming.
MH> No other idea :(.
MH> Martin
--- >8 ----
List archives: http://www.xiph.org/archives/
icecast project homepage: http://www.icecast.org/
To unsubscribe from this list, send a message to
'icecast-request@xiph.org'
containing only the word 'unsubscribe' in the body. No subject is
needed.
Unsubscribe messages sent to the list will be ignored/filtered.