Ravishankar N
2021-May-20 13:01 UTC
[Gluster-users] Issues with glustershd with release 8.4 and 9.1
Hi Marco, On Wed, May 19, 2021 at 8:02 PM Marco Fais <evilmf at gmail.com> wrote:> Hi Ravi, > > thanks a million for your reply. > > I have replicated the issue in my test cluster by bringing one of the > nodes down, and then up again. > The glustershd process in the restarted node is now complaining about > connectivity to two bricks in one of my volumes: > > --- > [2021-05-19 14:05:14.462133 +0000] I [rpc-clnt.c:1968:rpc_clnt_reconfig] > 2-VM_Storage_1-client-11: changing port to 49170 (from 0) > [2021-05-19 14:05:14.464971 +0000] I [MSGID: 114057] > [client-handshake.c:1128:select_server_supported_programs] > 2-VM_Storage_1-client-11: Using Program [{Program-name=GlusterFS 4.x v1}, > {Num=1298437}, {Version=400}] > [2021-05-19 14:05:14.465209 +0000] W [MSGID: 114043] > [client-handshake.c:727:client_setvolume_cbk] 2-VM_Storage_1-client-11: > failed to set the volume [{errno=2}, {error=No such file or directory}] > [2021-05-19 14:05:14.465236 +0000] W [MSGID: 114007] > [client-handshake.c:752:client_setvolume_cbk] 2-VM_Storage_1-client-11: > failed to get from reply dict [{process-uuid}, {errno=22}, {error=Invalid > argument}] > [2021-05-19 14:05:14.465248 +0000] E [MSGID: 114044] > [client-handshake.c:757:client_setvolume_cbk] 2-VM_Storage_1-client-11: > SETVOLUME on remote-host failed [{remote-error=Brick not found}, {errno=2}, > {error=No such file or directory}] > [2021-05-19 14:05:14.465256 +0000] I [MSGID: 114051] > [client-handshake.c:879:client_setvolume_cbk] 2-VM_Storage_1-client-11: > sending CHILD_CONNECTING event [] > [2021-05-19 14:05:14.465291 +0000] I [MSGID: 114018] > [client.c:2229:client_rpc_notify] 2-VM_Storage_1-client-11: disconnected > from client, process will keep trying to connect glusterd until brick's > port is available [{conn-name=VM_Storage_1-client-11}] > [2021-05-19 14:05:14.473598 +0000] I [rpc-clnt.c:1968:rpc_clnt_reconfig] > 2-VM_Storage_1-client-20: changing port to 49173 (from 0) >The above logs indicate that shd is trying to connect to the bricks on ports 49170 and 49173 respectively, when it should have done so using 49172 and 49169 (as per the volume status and ps output). Shd gets the brick port numbers info from glusterd, so I'm not sure what is going on here. Do you have fuse mounts on this particular node? If you don't, you can mount it temporarily, then check if the connection to the bricks is successful from the .meta folder of the mount: cd /path-to-fuse-mount cd .meta cat graphs/active/VM_Storage_1-client-11/private cat graphs/active/VM_Storage_1-client-20/private etc. and check if connected=1 or 0. I just wanted to see if it is only the shd or even the other clients are unable to connect to the bricks from this node. FWIW, I tried upgrading from 7.9 to 8.4 on a test machine and the shd was able to connect to the bricks just fine. Regards, Ravi> [2021-05-19 14:05:14.476543 +0000] I [MSGID: 114057] > [client-handshake.c:1128:select_server_supported_programs] > 2-VM_Storage_1-client-20: Using Program [{Program-name=GlusterFS 4.x v1}, > {Num=1298437}, {Version=400}] > [2021-05-19 14:05:14.476764 +0000] W [MSGID: 114043] > [client-handshake.c:727:client_setvolume_cbk] 2-VM_Storage_1-client-20: > failed to set the volume [{errno=2}, {error=No such file or directory}] > [2021-05-19 14:05:14.476785 +0000] W [MSGID: 114007] > [client-handshake.c:752:client_setvolume_cbk] 2-VM_Storage_1-client-20: > failed to get from reply dict [{process-uuid}, {errno=22}, {error=Invalid > argument}] > [2021-05-19 14:05:14.476799 +0000] E [MSGID: 114044] > [client-handshake.c:757:client_setvolume_cbk] 2-VM_Storage_1-client-20: > SETVOLUME on remote-host failed [{remote-error=Brick not found}, {errno=2}, > {error=No such file or directory}] > [2021-05-19 14:05:14.476812 +0000] I [MSGID: 114051] > [client-handshake.c:879:client_setvolume_cbk] 2-VM_Storage_1-client-20: > sending CHILD_CONNECTING event [] > [2021-05-19 14:05:14.476849 +0000] I [MSGID: 114018] > [client.c:2229:client_rpc_notify] 2-VM_Storage_1-client-20: disconnected > from client, process will keep trying to connect glusterd until brick's > port is available [{conn-name=VM_Storage_1-client-20}] > --- > > The two bricks are the following: > VM_Storage_1-client-20 --> Brick21: > lab-cnvirt-h03-storage:/bricks/vm_b5_arb/brick (arbiter) > VM_Storage_1-client-11 --> Brick12: > lab-cnvirt-h03-storage:/bricks/vm_b3_arb/brick (arbiter) > (In this case it the issue is on two arbiter nodes, but it is not always > the case) > > The port information via "gluster volume status VM_Storage_1" on the > affected node (same as the one running the glustershd reporting the issue) > is: > Brick lab-cnvirt-h03-storage:/bricks/vm_b5_arb/brick > *49172 *0 Y 3978256 > Brick lab-cnvirt-h03-storage:/bricks/vm_b3_arb/brick > *49169 *0 Y 3978224 > > This is aligned to the actual port of the process: > root 3978256 1.5 0.0 1999568 30372 ? Ssl May18 15:56 > /usr/sbin/glusterfsd -s lab-cnvirt-h03-storage --volfile-id > VM_Storage_1.lab-cnvirt-h03-storage.bricks-vm_b5_arb-brick -p > /var/run/gluster/vols/VM_Storage_1/lab-cnvirt-h03-storage-bricks-vm_b5_arb-brick.pid > -S /var/run/gluster/2b1dd3ca06d39a59.socket --brick-name > /bricks/vm_b5_arb/brick -l > /var/log/glusterfs/bricks/bricks-vm_b5_arb-brick.log --xlator-option > *-posix.glusterd-uuid=a2a62dd6-49b2-4eb6-a7e2-59c75723f5c7 --process-name > brick --brick-port *49172 *--xlator-option > VM_Storage_1-server.listen-port=*49172* > root 3978224 4.3 0.0 1867976 27928 ? Ssl May18 44:55 > /usr/sbin/glusterfsd -s lab-cnvirt-h03-storage --volfile-id > VM_Storage_1.lab-cnvirt-h03-storage.bricks-vm_b3_arb-brick -p > /var/run/gluster/vols/VM_Storage_1/lab-cnvirt-h03-storage-bricks-vm_b3_arb-brick.pid > -S /var/run/gluster/00d461b7d79badc9.socket --brick-name > /bricks/vm_b3_arb/brick -l > /var/log/glusterfs/bricks/bricks-vm_b3_arb-brick.log --xlator-option > *-posix.glusterd-uuid=a2a62dd6-49b2-4eb6-a7e2-59c75723f5c7 --process-name > brick --brick-port *49169 *--xlator-option > VM_Storage_1-server.listen-port=*49169* > > So the issue seems to be specifically on glustershd, as the *glusterd > process seems to be aware of the right port *(as it matches the real > port, and the brick is indeed up according to the status). > > I have then requested a statedump as you have suggested, and the bricks > seem to be not connected: > > [xlator.protocol.client.VM_Storage_1-client-11.priv] > *connected=0* > total_bytes_read=341120 > ping_timeout=42 > total_bytes_written=594008 > ping_msgs_sent=0 > msgs_sent=0 > > [xlator.protocol.client.VM_Storage_1-client-20.priv] > *connected=0* > total_bytes_read=341120 > ping_timeout=42 > total_bytes_written=594008 > ping_msgs_sent=0 > msgs_sent=0 > > The important other thing to notice is that normally the bricks that are > not connecting are always in the same (remote) node... i.e. they are both > in node 3 in this case. That seems to be always the case, I have not > encountered a scenario where bricks from different nodes are reporting this > issue (at least for the same volume). > > Please let me know if you need any additional info. > > Regards, > Marco > > > On Wed, 19 May 2021 at 06:31, Ravishankar N <ravishankar at redhat.com> > wrote: > >> >> >> On Mon, May 17, 2021 at 4:22 PM Marco Fais <evilmf at gmail.com> wrote: >> >>> Hi, >>> >>> I am having significant issues with glustershd with releases 8.4 and 9.1. >>> >>> My oVirt clusters are using gluster storage backends, and were running >>> fine with Gluster 7.x (shipped with earlier versions of oVirt Node 4.4.x). >>> Recently the oVirt project moved to Gluster 8.4 for the nodes, and hence I >>> have moved to this release when upgrading my clusters. >>> >>> Since then I am having issues whenever one of the nodes is brought down; >>> when the nodes come back up online the bricks are typically back up and >>> working, but some (random) glustershd processes in the various nodes seem >>> to have issues connecting to some of them. >>> >>> >> When the issue happens, can you check if the TCP port number of the brick >> (glusterfsd) processes displayed in `gluster volume status` matches with >> that of the actual port numbers observed (i.e. the --brick-port argument) >> when you run `ps aux | grep glusterfsd` ? If they don't match, then >> glusterd has incorrect brick port information in its memory and serving it >> to glustershd. Restarting glusterd instead of (killing the bricks + `volume >> start force`) should fix it, although we need to find why glusterd serves >> incorrect port numbers. >> >> If they do match, then can you take a statedump of glustershd to check >> that it is indeed disconnected from the bricks? You will need to verify >> that 'connected=1' in the statedump. See "Self-heal is stuck/ not getting >> completed." section in >> https://docs.gluster.org/en/latest/Troubleshooting/troubleshooting-afr/. >> Statedump can be taken by `kill -SIGUSR1 $pid-of-glustershd`. It will be >> generated in the /var/run/gluster/ directory. >> >> Regards, >> Ravi >> >> >>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20210520/963f31a5/attachment.html>
Marco Fais
2021-May-20 17:54 UTC
[Gluster-users] Issues with glustershd with release 8.4 and 9.1
HI Ravi, thanks again for your help. Here is the output of "cat graphs/active/VM_Storage_1-client-11/private" from the same node where glustershd is complaining: [xlator.protocol.client.VM_Storage_1-client-11.priv] fd.0.remote_fd = 1 ------ = ------ granted-posix-lock[0] = owner = 7904e87d91693fb7, cmd = F_SETLK fl_type F_RDLCK, fl_start = 100, fl_end = 100, user_flock: l_type = F_RDLCK, l_start = 100, l_len = 1 granted-posix-lock[1] = owner = 7904e87d91693fb7, cmd = F_SETLK fl_type F_RDLCK, fl_start = 101, fl_end = 101, user_flock: l_type = F_RDLCK, l_start = 101, l_len = 1 granted-posix-lock[2] = owner = 7904e87d91693fb7, cmd = F_SETLK fl_type F_RDLCK, fl_start = 103, fl_end = 103, user_flock: l_type = F_RDLCK, l_start = 103, l_len = 1 granted-posix-lock[3] = owner = 7904e87d91693fb7, cmd = F_SETLK fl_type F_RDLCK, fl_start = 201, fl_end = 201, user_flock: l_type = F_RDLCK, l_start = 201, l_len = 1 granted-posix-lock[4] = owner = 7904e87d91693fb7, cmd = F_SETLK fl_type F_RDLCK, fl_start = 203, fl_end = 203, user_flock: l_type = F_RDLCK, l_start = 203, l_len = 1 ------ = ------ fd.1.remote_fd = 0 ------ = ------ granted-posix-lock[0] = owner = b43238094746d9fe, cmd = F_SETLK fl_type F_RDLCK, fl_start = 100, fl_end = 100, user_flock: l_type = F_RDLCK, l_start = 100, l_len = 1 granted-posix-lock[1] = owner = b43238094746d9fe, cmd = F_SETLK fl_type F_RDLCK, fl_start = 201, fl_end = 201, user_flock: l_type = F_RDLCK, l_start = 201, l_len = 1 granted-posix-lock[2] = owner = b43238094746d9fe, cmd = F_SETLK fl_type F_RDLCK, fl_start = 203, fl_end = 203, user_flock: l_type = F_RDLCK, l_start = 203, l_len = 1 ------ = ------ fd.2.remote_fd = 3 ------ = ------ granted-posix-lock[0] = owner = 53526588c515153b, cmd = F_SETLK fl_type F_RDLCK, fl_start = 100, fl_end = 100, user_flock: l_type = F_RDLCK, l_start = 100, l_len = 1 granted-posix-lock[1] = owner = 53526588c515153b, cmd = F_SETLK fl_type F_RDLCK, fl_start = 201, fl_end = 201, user_flock: l_type = F_RDLCK, l_start = 201, l_len = 1 granted-posix-lock[2] = owner = 53526588c515153b, cmd = F_SETLK fl_type F_RDLCK, fl_start = 203, fl_end = 203, user_flock: l_type = F_RDLCK, l_start = 203, l_len = 1 ------ = ------ fd.3.remote_fd = 2 ------ = ------ granted-posix-lock[0] = owner = 889461581e4fda22, cmd = F_SETLK fl_type F_RDLCK, fl_start = 100, fl_end = 100, user_flock: l_type = F_RDLCK, l_start = 100, l_len = 1 granted-posix-lock[1] = owner = 889461581e4fda22, cmd = F_SETLK fl_type F_RDLCK, fl_start = 101, fl_end = 101, user_flock: l_type = F_RDLCK, l_start = 101, l_len = 1 granted-posix-lock[2] = owner = 889461581e4fda22, cmd = F_SETLK fl_type F_RDLCK, fl_start = 103, fl_end = 103, user_flock: l_type = F_RDLCK, l_start = 103, l_len = 1 granted-posix-lock[3] = owner = 889461581e4fda22, cmd = F_SETLK fl_type F_RDLCK, fl_start = 201, fl_end = 201, user_flock: l_type = F_RDLCK, l_start = 201, l_len = 1 granted-posix-lock[4] = owner = 889461581e4fda22, cmd = F_SETLK fl_type F_RDLCK, fl_start = 203, fl_end = 203, user_flock: l_type = F_RDLCK, l_start = 203, l_len = 1 ------ = ------ connected = 1 total_bytes_read = 6665235356 ping_timeout = 42 total_bytes_written = 4756303549 ping_msgs_sent = 3662 msgs_sent = 16786186 So they seem to be connected there. *However* -- they are not connected apparently in server 2 (where I have just re-mounted the volume): [root at lab-cnvirt-h02 .meta]# cat graphs/active/VM_Storage_1-client-11/private [xlator.protocol.client.VM_Storage_1-client-11.priv] *connected = 0* total_bytes_read = 50020 ping_timeout = 42 total_bytes_written = 84628 ping_msgs_sent = 0 msgs_sent = 0 [root at lab-cnvirt-h02 .meta]# cat graphs/active/VM_Storage_1-client-20/private [xlator.protocol.client.VM_Storage_1-client-20.priv] *connected = 0* total_bytes_read = 53300 ping_timeout = 42 total_bytes_written = 90180 ping_msgs_sent = 0 msgs_sent = 0 The other bricks look connected... Regards, Marco On Thu, 20 May 2021 at 14:02, Ravishankar N <ravishankar at redhat.com> wrote:> Hi Marco, > > On Wed, May 19, 2021 at 8:02 PM Marco Fais <evilmf at gmail.com> wrote: > >> Hi Ravi, >> >> thanks a million for your reply. >> >> I have replicated the issue in my test cluster by bringing one of the >> nodes down, and then up again. >> The glustershd process in the restarted node is now complaining about >> connectivity to two bricks in one of my volumes: >> >> --- >> [2021-05-19 14:05:14.462133 +0000] I [rpc-clnt.c:1968:rpc_clnt_reconfig] >> 2-VM_Storage_1-client-11: changing port to 49170 (from 0) >> [2021-05-19 14:05:14.464971 +0000] I [MSGID: 114057] >> [client-handshake.c:1128:select_server_supported_programs] >> 2-VM_Storage_1-client-11: Using Program [{Program-name=GlusterFS 4.x v1}, >> {Num=1298437}, {Version=400}] >> [2021-05-19 14:05:14.465209 +0000] W [MSGID: 114043] >> [client-handshake.c:727:client_setvolume_cbk] 2-VM_Storage_1-client-11: >> failed to set the volume [{errno=2}, {error=No such file or directory}] >> [2021-05-19 14:05:14.465236 +0000] W [MSGID: 114007] >> [client-handshake.c:752:client_setvolume_cbk] 2-VM_Storage_1-client-11: >> failed to get from reply dict [{process-uuid}, {errno=22}, {error=Invalid >> argument}] >> [2021-05-19 14:05:14.465248 +0000] E [MSGID: 114044] >> [client-handshake.c:757:client_setvolume_cbk] 2-VM_Storage_1-client-11: >> SETVOLUME on remote-host failed [{remote-error=Brick not found}, {errno=2}, >> {error=No such file or directory}] >> [2021-05-19 14:05:14.465256 +0000] I [MSGID: 114051] >> [client-handshake.c:879:client_setvolume_cbk] 2-VM_Storage_1-client-11: >> sending CHILD_CONNECTING event [] >> [2021-05-19 14:05:14.465291 +0000] I [MSGID: 114018] >> [client.c:2229:client_rpc_notify] 2-VM_Storage_1-client-11: disconnected >> from client, process will keep trying to connect glusterd until brick's >> port is available [{conn-name=VM_Storage_1-client-11}] >> [2021-05-19 14:05:14.473598 +0000] I [rpc-clnt.c:1968:rpc_clnt_reconfig] >> 2-VM_Storage_1-client-20: changing port to 49173 (from 0) >> > > The above logs indicate that shd is trying to connect to the bricks on > ports 49170 and 49173 respectively, when it should have done so > using 49172 and 49169 (as per the volume status and ps output). Shd gets > the brick port numbers info from glusterd, so I'm not sure what is going on > here. Do you have fuse mounts on this particular node? If you don't, you > can mount it temporarily, then check if the connection to the bricks is > successful from the .meta folder of the mount: > > cd /path-to-fuse-mount > cd .meta > cat graphs/active/VM_Storage_1-client-11/private > cat graphs/active/VM_Storage_1-client-20/private > etc. and check if connected=1 or 0. > > I just wanted to see if it is only the shd or even the other clients are > unable to connect to the bricks from this node. FWIW, I tried upgrading > from 7.9 to 8.4 on a test machine and the shd was able to connect to the > bricks just fine. > Regards, > Ravi > > > > >> [2021-05-19 14:05:14.476543 +0000] I [MSGID: 114057] >> [client-handshake.c:1128:select_server_supported_programs] >> 2-VM_Storage_1-client-20: Using Program [{Program-name=GlusterFS 4.x v1}, >> {Num=1298437}, {Version=400}] >> [2021-05-19 14:05:14.476764 +0000] W [MSGID: 114043] >> [client-handshake.c:727:client_setvolume_cbk] 2-VM_Storage_1-client-20: >> failed to set the volume [{errno=2}, {error=No such file or directory}] >> [2021-05-19 14:05:14.476785 +0000] W [MSGID: 114007] >> [client-handshake.c:752:client_setvolume_cbk] 2-VM_Storage_1-client-20: >> failed to get from reply dict [{process-uuid}, {errno=22}, {error=Invalid >> argument}] >> [2021-05-19 14:05:14.476799 +0000] E [MSGID: 114044] >> [client-handshake.c:757:client_setvolume_cbk] 2-VM_Storage_1-client-20: >> SETVOLUME on remote-host failed [{remote-error=Brick not found}, {errno=2}, >> {error=No such file or directory}] >> [2021-05-19 14:05:14.476812 +0000] I [MSGID: 114051] >> [client-handshake.c:879:client_setvolume_cbk] 2-VM_Storage_1-client-20: >> sending CHILD_CONNECTING event [] >> [2021-05-19 14:05:14.476849 +0000] I [MSGID: 114018] >> [client.c:2229:client_rpc_notify] 2-VM_Storage_1-client-20: disconnected >> from client, process will keep trying to connect glusterd until brick's >> port is available [{conn-name=VM_Storage_1-client-20}] >> --- >> >> The two bricks are the following: >> VM_Storage_1-client-20 --> Brick21: >> lab-cnvirt-h03-storage:/bricks/vm_b5_arb/brick (arbiter) >> VM_Storage_1-client-11 --> Brick12: >> lab-cnvirt-h03-storage:/bricks/vm_b3_arb/brick (arbiter) >> (In this case it the issue is on two arbiter nodes, but it is not always >> the case) >> >> The port information via "gluster volume status VM_Storage_1" on the >> affected node (same as the one running the glustershd reporting the issue) >> is: >> Brick lab-cnvirt-h03-storage:/bricks/vm_b5_arb/brick >> *49172 *0 Y 3978256 >> Brick lab-cnvirt-h03-storage:/bricks/vm_b3_arb/brick >> *49169 *0 Y 3978224 >> >> This is aligned to the actual port of the process: >> root 3978256 1.5 0.0 1999568 30372 ? Ssl May18 15:56 >> /usr/sbin/glusterfsd -s lab-cnvirt-h03-storage --volfile-id >> VM_Storage_1.lab-cnvirt-h03-storage.bricks-vm_b5_arb-brick -p >> /var/run/gluster/vols/VM_Storage_1/lab-cnvirt-h03-storage-bricks-vm_b5_arb-brick.pid >> -S /var/run/gluster/2b1dd3ca06d39a59.socket --brick-name >> /bricks/vm_b5_arb/brick -l >> /var/log/glusterfs/bricks/bricks-vm_b5_arb-brick.log --xlator-option >> *-posix.glusterd-uuid=a2a62dd6-49b2-4eb6-a7e2-59c75723f5c7 --process-name >> brick --brick-port *49172 *--xlator-option >> VM_Storage_1-server.listen-port=*49172* >> root 3978224 4.3 0.0 1867976 27928 ? Ssl May18 44:55 >> /usr/sbin/glusterfsd -s lab-cnvirt-h03-storage --volfile-id >> VM_Storage_1.lab-cnvirt-h03-storage.bricks-vm_b3_arb-brick -p >> /var/run/gluster/vols/VM_Storage_1/lab-cnvirt-h03-storage-bricks-vm_b3_arb-brick.pid >> -S /var/run/gluster/00d461b7d79badc9.socket --brick-name >> /bricks/vm_b3_arb/brick -l >> /var/log/glusterfs/bricks/bricks-vm_b3_arb-brick.log --xlator-option >> *-posix.glusterd-uuid=a2a62dd6-49b2-4eb6-a7e2-59c75723f5c7 --process-name >> brick --brick-port *49169 *--xlator-option >> VM_Storage_1-server.listen-port=*49169* >> >> So the issue seems to be specifically on glustershd, as the *glusterd >> process seems to be aware of the right port *(as it matches the real >> port, and the brick is indeed up according to the status). >> >> I have then requested a statedump as you have suggested, and the bricks >> seem to be not connected: >> >> [xlator.protocol.client.VM_Storage_1-client-11.priv] >> *connected=0* >> total_bytes_read=341120 >> ping_timeout=42 >> total_bytes_written=594008 >> ping_msgs_sent=0 >> msgs_sent=0 >> >> [xlator.protocol.client.VM_Storage_1-client-20.priv] >> *connected=0* >> total_bytes_read=341120 >> ping_timeout=42 >> total_bytes_written=594008 >> ping_msgs_sent=0 >> msgs_sent=0 >> >> The important other thing to notice is that normally the bricks that are >> not connecting are always in the same (remote) node... i.e. they are both >> in node 3 in this case. That seems to be always the case, I have not >> encountered a scenario where bricks from different nodes are reporting this >> issue (at least for the same volume). >> >> Please let me know if you need any additional info. >> >> Regards, >> Marco >> >> >> On Wed, 19 May 2021 at 06:31, Ravishankar N <ravishankar at redhat.com> >> wrote: >> >>> >>> >>> On Mon, May 17, 2021 at 4:22 PM Marco Fais <evilmf at gmail.com> wrote: >>> >>>> Hi, >>>> >>>> I am having significant issues with glustershd with releases 8.4 and >>>> 9.1. >>>> >>>> My oVirt clusters are using gluster storage backends, and were running >>>> fine with Gluster 7.x (shipped with earlier versions of oVirt Node 4.4.x). >>>> Recently the oVirt project moved to Gluster 8.4 for the nodes, and hence I >>>> have moved to this release when upgrading my clusters. >>>> >>>> Since then I am having issues whenever one of the nodes is brought >>>> down; when the nodes come back up online the bricks are typically back up >>>> and working, but some (random) glustershd processes in the various nodes >>>> seem to have issues connecting to some of them. >>>> >>>> >>> When the issue happens, can you check if the TCP port number of the >>> brick (glusterfsd) processes displayed in `gluster volume status` matches >>> with that of the actual port numbers observed (i.e. the --brick-port >>> argument) when you run `ps aux | grep glusterfsd` ? If they don't match, >>> then glusterd has incorrect brick port information in its memory and >>> serving it to glustershd. Restarting glusterd instead of (killing the >>> bricks + `volume start force`) should fix it, although we need to find why >>> glusterd serves incorrect port numbers. >>> >>> If they do match, then can you take a statedump of glustershd to check >>> that it is indeed disconnected from the bricks? You will need to verify >>> that 'connected=1' in the statedump. See "Self-heal is stuck/ not getting >>> completed." section in >>> https://docs.gluster.org/en/latest/Troubleshooting/troubleshooting-afr/. >>> Statedump can be taken by `kill -SIGUSR1 $pid-of-glustershd`. It will be >>> generated in the /var/run/gluster/ directory. >>> >>> Regards, >>> Ravi >>> >>> >>>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20210520/efb43960/attachment.html>