Dear Gilberto,
If I am right, you ran into server-quorum if you startet a 2-node
replica and shutdown one host.
From my perspective, its fine.
Please correct me if I am wrong here.
Regards,
Felix
On 27/10/2020 01:46, Gilberto Nunes wrote:> Well I do not reboot the host. I shut down the host. Then after 15 min
> give up.
> Don't know why that happened.
> I will try it latter
>
> ---
> Gilberto Nunes Ferreira
>
>
>
>
>
>
> Em seg., 26 de out. de 2020 ?s 21:31, Strahil Nikolov
> <hunter86_bg at yahoo.com <mailto:hunter86_bg at yahoo.com>>
escreveu:
>
> Usually there is always only 1 "master" , but when you power
off
> one of the 2 nodes - the geo rep should handle that and the second
> node should take the job.
>
> How long did you wait after gluster1 has been rebooted ?
>
>
> Best Regards,
> Strahil Nikolov
>
>
>
>
>
>
> ? ??????????, 26 ???????? 2020 ?., 22:46:21 ???????+2, Gilberto
> Nunes <gilberto.nunes32 at gmail.com
> <mailto:gilberto.nunes32 at gmail.com>> ??????:
>
>
>
>
>
> I was?able to solve the issue restarting all servers.
>
> Now I have?another issue!
>
> I just powered off the gluster01 server and then the
> geo-replication entered in faulty status.
> I tried to stop and start the gluster geo-replication like that:
>
> gluster volume geo-replication DATA root at gluster03::DATA-SLAVE
> resume ?Peer gluster01.home.local, which is a part of DATA volume,
> is down. Please bring up the peer and retry. geo-replication
> command failed
> How can I have geo-replication with 2 master and 1 slave?
>
> Thanks
>
>
> ---
> Gilberto Nunes Ferreira
>
>
>
>
>
>
>
> Em seg., 26 de out. de 2020 ?s 17:23, Gilberto Nunes
> <gilberto.nunes32 at gmail.com <mailto:gilberto.nunes32 at
gmail.com>>
> escreveu:
> > Hi there...
> >
> > I'd created a 2 gluster vol and another 1 gluster server
acting
> as a backup server, using geo-replication.
> > So in gluster01 I'd issued the command:
> >
> > gluster peer probe gluster02;gluster peer probe gluster03
> > gluster vol create DATA replica 2 gluster01:/DATA/master01-data
> gluster02:/DATA/master01-data/
> >
> > Then in gluster03 server:
> >
> > gluster vol create DATA-SLAVE gluster03:/DATA/slave-data/
> >
> > I'd setted the ssh powerless session between this 3 servers.
> >
> > Then I'd used this script
> >
> > https://github.com/gilbertoferreira/georepsetup
> >
> > like this
> >
> > georepsetup
>
???????????/usr/local/lib/python2.7/dist-packages/paramiko-2.7.2-py2.7.egg/paramiko/transport.py:33:
> CryptographyDeprecationWarning: Python 2 is no longer supported by
> the Python core team. Support for it is now deprecated in
> cryptography, and will be removed in a future release. ?from
> cryptography.hazmat.backends import default_backend usage:
> georepsetup [-h] [--force] [--no-color] MASTERVOL SLAVE SLAVEVOL
> georepsetup: error: too few arguments gluster01:~# georepsetup
> DATA gluster03 DATA-SLAVE
>
/usr/local/lib/python2.7/dist-packages/paramiko-2.7.2-py2.7.egg/paramiko/transport.py:33:
> CryptographyDeprecationWarning: Python 2 is no longer supported by
> the Python core team. Support for it is now deprecated in
> cryptography, and will be removed in a future release. ?from
> cryptography.hazmat.backends import default_backend
> Geo-replication session will be established between DATA and
> gluster03::DATA-SLAVE Root password of gluster03 is required to
> complete the setup. NOTE: Password will not be stored.
> root at gluster03's password: ?[ ???OK] gluster03 is Reachable(Port
> 22) [ ???OK] SSH Connection established root at gluster03 [ ???OK]
> Master Volume and Slave Volume are compatible (Version: 8.2) [
> ???OK] Common secret pub file present at
> /var/lib/glusterd/geo-replication/common_secret.pem.pub [ ???OK]
> common_secret.pem.pub file copied to gluster03 [ ???OK] Master SSH
> Keys copied to all Up Slave nodes [ ???OK] Updated Master SSH Keys
> to all Up Slave nodes authorized_keys file [ ???OK]
> Geo-replication Session Established
> > Then I reboot the 3 servers...
> > After a while everything works ok, but after a few minutes, I
> get Faulty status in gluster01....
> >
> > There's the log
> >
> >
> > [2020-10-26 20:16:41.362584] I
> [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker
> Status Change [{status=Initializing...}] [2020-10-26
> 20:16:41.362937] I [monitor(monitor):160:monitor] Monitor:
> starting gsyncd worker [{brick=/DATA/master01-data},
> {slave_node=gluster03}] [2020-10-26 20:16:41.508884] I
> [resource(worker /DATA/master01-data):1387:connect_remote] SSH:
> Initializing SSH connection between master and slave...
> [2020-10-26 20:16:42.996678] I [resource(worker
> /DATA/master01-data):1436:connect_remote] SSH: SSH connection
> between master and slave established. [{duration=1.4873}]
> [2020-10-26 20:16:42.997121] I [resource(worker
> /DATA/master01-data):1116:connect] GLUSTER: Mounting gluster
> volume locally... [2020-10-26 20:16:44.170661] E
> [syncdutils(worker /DATA/master01-data):110:gf_mount_ready]
<top>:
> failed to get the xattr value [2020-10-26 20:16:44.171281] I
> [resource(worker /DATA/master01-data):1139:connect] GLUSTER:
> Mounted gluster volume [{duration=1.1739}] [2020-10-26
> 20:16:44.171772] I [subcmds(worker
> /DATA/master01-data):84:subcmd_worker] <top>: Worker spawn
> successful. Acknowledging back to monitor [2020-10-26
> 20:16:46.200603] I [master(worker
> /DATA/master01-data):1645:register] _GMaster: Working dir
>
[{path=/var/lib/misc/gluster/gsyncd/DATA_gluster03_DATA-SLAVE/DATA-master01-data}]
> [2020-10-26 20:16:46.201798] I [resource(worker
> /DATA/master01-data):1292:service_loop] GLUSTER: Register time
> [{time=1603743406}] [2020-10-26 20:16:46.226415] I
> [gsyncdstatus(worker /DATA/master01-data):281:set_active]
> GeorepStatus: Worker Status Change [{status=Active}] [2020-10-26
> 20:16:46.395112] I [gsyncdstatus(worker
> /DATA/master01-data):253:set_worker_crawl_status] GeorepStatus:
> Crawl Status Change [{status=History Crawl}] [2020-10-26
> 20:16:46.396491] I [master(worker /DATA/master01-data):1559:crawl]
> _GMaster: starting history crawl [{turns=1}, {stime=(1603742506,
> 0)},{etime=1603743406}, {entry_stime=(1603743226, 0)}] [2020-10-26
> 20:16:46.399292] E [resource(worker
> /DATA/master01-data):1312:service_loop] GLUSTER: Changelog History
> Crawl failed [{error=[Errno 0] Sucesso}] [2020-10-26
> 20:16:47.177205] I [monitor(monitor):228:monitor] Monitor: worker
> died in startup phase [{brick=/DATA/master01-data}] [2020-10-26
> 20:16:47.184525] I [gsyncdstatus(monitor):248:set_worker_status]
> GeorepStatus: Worker Status Change [{status=Faulty}]
> >
> > Any advice will be welcome.
> >
> > Thanks
> >
> > ---
> > Gilberto Nunes Ferreira
> >
> >
> >
> >
> >
> >
> ________
>
>
>
> Community Meeting Calendar:
>
> Schedule -
> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> Bridge: https://bluejeans.com/441850968
>
> Gluster-users mailing list
> Gluster-users at gluster.org <mailto:Gluster-users at
gluster.org>
> https://lists.gluster.org/mailman/listinfo/gluster-users
>
>
> ________
>
>
>
> Community Meeting Calendar:
>
> Schedule -
> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> Bridge: https://bluejeans.com/441850968
>
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.gluster.org/pipermail/gluster-users/attachments/20201027/8c8b41e5/attachment.html>