Krutika Dhananjay
2019-May-13 07:21 UTC
[Gluster-users] VMs blocked for more than 120 seconds
Also, what's the caching policy that qemu is using on the affected vms? Is it cache=none? Or something else? You can get this information in the command line of qemu-kvm process corresponding to your vm in the ps output. -Krutika On Mon, May 13, 2019 at 12:49 PM Krutika Dhananjay <kdhananj at redhat.com> wrote:> What version of gluster are you using? > Also, can you capture and share volume-profile output for a run where you > manage to recreate this issue? > > https://docs.gluster.org/en/v3/Administrator%20Guide/Monitoring%20Workload/#running-glusterfs-volume-profile-command > Let me know if you have any questions. > > -Krutika > > On Mon, May 13, 2019 at 12:34 PM Martin Toth <snowmailer at gmail.com> wrote: > >> Hi, >> >> there is no healing operation, not peer disconnects, no readonly >> filesystem. Yes, storage is slow and unavailable for 120 seconds, but why, >> its SSD with 10G, performance is good. >> >> > you'd have it's log on qemu's standard output, >> >> If you mean /var/log/libvirt/qemu/vm.log there is nothing. I am looking >> for problem for more than month, tried everything. Can?t find anything. Any >> more clues or leads? >> >> BR, >> Martin >> >> > On 13 May 2019, at 08:55, lemonnierk at ulrar.net wrote: >> > >> > On Mon, May 13, 2019 at 08:47:45AM +0200, Martin Toth wrote: >> >> Hi all, >> > >> > Hi >> > >> >> >> >> I am running replica 3 on SSDs with 10G networking, everything works >> OK but VMs stored in Gluster volume occasionally freeze with ?Task XY >> blocked for more than 120 seconds?. >> >> Only solution is to poweroff (hard) VM and than boot it up again. I am >> unable to SSH and also login with console, its stuck probably on some disk >> operation. No error/warning logs or messages are store in VMs logs. >> >> >> > >> > As far as I know this should be unrelated, I get this during heals >> > without any freezes, it just means the storage is slow I think. >> > >> >> KVM/Libvirt(qemu) using libgfapi and fuse mount to access VM disks on >> replica volume. Can someone advice how to debug this problem or what can >> cause these issues? >> >> It?s really annoying, I?ve tried to google everything but nothing came >> up. I?ve tried changing virtio-scsi-pci to virtio-blk-pci disk drivers, but >> its not related. >> >> >> > >> > Any chance your gluster goes readonly ? Have you checked your gluster >> > logs to see if maybe they lose each other some times ? >> > /var/log/glusterfs >> > >> > For libgfapi accesses you'd have it's log on qemu's standard output, >> > that might contain the actual error at the time of the freez. >> > _______________________________________________ >> > Gluster-users mailing list >> > Gluster-users at gluster.org >> > https://lists.gluster.org/mailman/listinfo/gluster-users >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users at gluster.org >> https://lists.gluster.org/mailman/listinfo/gluster-users > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190513/ebc9d839/attachment.html>
Cache in qemu is none. That should be correct. This is full command : /usr/bin/qemu-system-x86_64 -name one-312 -S -machine pc-i440fx-xenial,accel=kvm,usb=off -m 4096 -realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -uuid e95a774e-a594-4e98-b141-9f30a3f848c1 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-one-312/monitor.sock,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -boot order=c,menu=on,splash-time=3000,strict=on -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x4 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5 -drive file=/var/lib/one//datastores/116/312/disk.0,format=raw,if=none,id=drive-virtio-disk1,cache=none -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-disk1,id=virtio-disk1 -drive file=gluster://localhost:24007/imagestore/7b64d6757acc47a39503f68731f89b8e,format=qcow2,if=none,id=drive-scsi0-0-0-0,cache=none -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0 -drive file=/var/lib/one//datastores/116/312/disk.1,format=raw,if=none,id=drive-ide0-0-0,readonly=on -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -netdev tap,fd=26,id=hostnet0 -device e1000,netdev=hostnet0,id=net0,mac=02:00:5c:f0:e4:39,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channel/target/domain-one-312/org.qemu.guest_agent.0,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 -vnc 0.0.0.0:312,password -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x7 -msg timestamp=on I?ve highlighted disks. First is VM context disk - Fuse used, second is SDA (OS is installed here) - libgfapi used, third is SWAP - Fuse used. Krutika, I will start profiling on Gluster Volumes and wait for next VM to fail. Than I will attach/send profiling info after some VM will be failed. I suppose this is correct profiling strategy. Thanks, BR! Martin> On 13 May 2019, at 09:21, Krutika Dhananjay <kdhananj at redhat.com> wrote: > > Also, what's the caching policy that qemu is using on the affected vms? > Is it cache=none? Or something else? You can get this information in the command line of qemu-kvm process corresponding to your vm in the ps output. > > -Krutika > > On Mon, May 13, 2019 at 12:49 PM Krutika Dhananjay <kdhananj at redhat.com <mailto:kdhananj at redhat.com>> wrote: > What version of gluster are you using? > Also, can you capture and share volume-profile output for a run where you manage to recreate this issue? > https://docs.gluster.org/en/v3/Administrator%20Guide/Monitoring%20Workload/#running-glusterfs-volume-profile-command <https://docs.gluster.org/en/v3/Administrator%20Guide/Monitoring%20Workload/#running-glusterfs-volume-profile-command> > Let me know if you have any questions. > > -Krutika > > On Mon, May 13, 2019 at 12:34 PM Martin Toth <snowmailer at gmail.com <mailto:snowmailer at gmail.com>> wrote: > Hi, > > there is no healing operation, not peer disconnects, no readonly filesystem. Yes, storage is slow and unavailable for 120 seconds, but why, its SSD with 10G, performance is good. > > > you'd have it's log on qemu's standard output, > > If you mean /var/log/libvirt/qemu/vm.log there is nothing. I am looking for problem for more than month, tried everything. Can?t find anything. Any more clues or leads? > > BR, > Martin > > > On 13 May 2019, at 08:55, lemonnierk at ulrar.net <mailto:lemonnierk at ulrar.net> wrote: > > > > On Mon, May 13, 2019 at 08:47:45AM +0200, Martin Toth wrote: > >> Hi all, > > > > Hi > > > >> > >> I am running replica 3 on SSDs with 10G networking, everything works OK but VMs stored in Gluster volume occasionally freeze with ?Task XY blocked for more than 120 seconds?. > >> Only solution is to poweroff (hard) VM and than boot it up again. I am unable to SSH and also login with console, its stuck probably on some disk operation. No error/warning logs or messages are store in VMs logs. > >> > > > > As far as I know this should be unrelated, I get this during heals > > without any freezes, it just means the storage is slow I think. > > > >> KVM/Libvirt(qemu) using libgfapi and fuse mount to access VM disks on replica volume. Can someone advice how to debug this problem or what can cause these issues? > >> It?s really annoying, I?ve tried to google everything but nothing came up. I?ve tried changing virtio-scsi-pci to virtio-blk-pci disk drivers, but its not related. > >> > > > > Any chance your gluster goes readonly ? Have you checked your gluster > > logs to see if maybe they lose each other some times ? > > /var/log/glusterfs > > > > For libgfapi accesses you'd have it's log on qemu's standard output, > > that might contain the actual error at the time of the freez. > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > > https://lists.gluster.org/mailman/listinfo/gluster-users <https://lists.gluster.org/mailman/listinfo/gluster-users> > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > https://lists.gluster.org/mailman/listinfo/gluster-users <https://lists.gluster.org/mailman/listinfo/gluster-users>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190513/594ca4a2/attachment.html>