Alex Chekholko
2018-Aug-14 16:25 UTC
[Gluster-users] ganesha.nfsd process dies when copying files
Hi Karli, I'm not 100% sure this is related, but when I set up my ZFS NFS HA per https://github.com/ewwhite/zfs-ha/wiki I was not able to get the failover to work with NFS v4 but only with NFS v3.>From the client point of view, it really looked like with NFS v4 there isan open file handle and that just goes stale and hangs, or something like that, whereas with NFSv3 the client retries and recovers and continues. I did not investigate further, I just use v3. I think it has something to do with NFSv4 being "stateful" and NFSv3 being "stateless". Can you re-run your test but using NFSv3 on the client mount? Or do you need to use v4.x? Regards, Alex On Tue, Aug 14, 2018 at 6:11 AM Karli Sj?berg <karli at inparadise.se> wrote:> On Fri, 2018-08-10 at 09:39 -0400, Kaleb S. KEITHLEY wrote: > > On 08/10/2018 09:23 AM, Karli Sj?berg wrote: > > > On Fri, 2018-08-10 at 21:23 +0800, Pui Edylie wrote: > > > > Hi Karli, > > > > > > > > Storhaug works with glusterfs 4.1.2 and latest nfs-ganesha. > > > > > > > > I just installed them last weekend ... they are working very well > > > > :) > > > > > > Okay, awesome! > > > > > > Is there any documentation on how to do that? > > > > > > > https://github.com/gluster/storhaug/wiki > > > > Thanks Kaleb and Edy! > > I have now redone the cluster using the latest and greatest following > the above guide and repeated the same test I was doing before (the > rsync while loop) with success. I let (forgot) it run for about a day > and it was still chugging along nicely when I aborted it, so success > there! > > On to the next test; the catastrophic failure test- where one of the > servers dies, I'm having a more difficult time with. > > 1) I start with mounting the share over NFS 4.1 and then proceed with > writing a 8 GiB large random data file with 'dd', while "hard-cutting" > the power to the server I'm writing to, the transfer just stops > indefinitely, until the server comes back again. Is that supposed to > happen? Like this: > > # dd if=/dev/urandom of=/var/tmp/test.bin bs=1M count=8192 > # mount -o vers=4.1 hv03v.localdomain:/data /mnt/ > # dd if=/var/tmp/test.bin of=/mnt/test.bin bs=1M status=progress > 2434793472 bytes (2,4 GB, 2,3 GiB) copied, 42 s, 57,9 MB/s > > (here I cut the power and let it be for almost two hours before turning > it on again) > > dd: error writing '/mnt/test.bin': Remote I/O error > 2325+0 records in > 2324+0 records out > 2436890624 bytes (2,4 GB, 2,3 GiB) copied, 6944,84 s, 351 kB/s > # umount /mnt > > Here the unmount command hung and I had to hard reset the client. > > 2) Another question I have is why some files "change" as you copy them > out to the Gluster storage? Is that the way it should be? This time, I > deleted eveything in the destination directory to start over: > > # mount -o vers=4.1 hv03v.localdomain:/data /mnt/ > # rm -f /mnt/test.bin > # dd if=/var/tmp/test.bin of=/mnt/test.bin bs=1M status=progress > 8557428736 bytes (8,6 GB, 8,0 GiB) copied, 122 s, 70,1 MB/s > 8192+0 records in > 8192+0 records out > 8589934592 bytes (8,6 GB, 8,0 GiB) copied, 123,039 s, 69,8 MB/s > # md5sum /var/tmp/test.bin > 073867b68fa8eaa382ffe05adb90b583 /var/tmp/test.bin > # md5sum /mnt/test.bin > 634187d367f856f3f5fb31846f796397 /mnt/test.bin > # umount /mnt > > Thanks in advance! > > /K > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > https://lists.gluster.org/mailman/listinfo/gluster-users-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20180814/fece9249/attachment.html>
Pui Edylie
2018-Aug-15 05:42 UTC
[Gluster-users] ganesha.nfsd process dies when copying files
Hi Karli, I think Alex is right in regards with the NFS version and state. I am only using NFSv3 and the failover is working per expectation. In my use case, I have 3 nodes with ESXI 6.7 as OS and setup 1x gluster VM on each of the ESXI host using its local datastore. Once I have formed the replicate 3, I use the CTDB VIP to present the NFS3 back to the Vcenter and uses it as a shared storage. Everything works great other than performance is not very good ... I am still looking for ways to improve it. Cheers, Edy On 8/15/2018 12:25 AM, Alex Chekholko wrote:> Hi Karli, > > I'm not 100% sure this is related, but when I set up my ZFS NFS HA per > https://github.com/ewwhite/zfs-ha/wiki I was not able to get the > failover to work with NFS v4 but only with NFS v3. > > From the client point of view, it really looked like with NFS v4 there > is an open file handle and that just goes stale and hangs, or > something like that, whereas with NFSv3 the client retries and > recovers and continues.? I did not investigate further, I just use > v3.? I think it has something to do with NFSv4 being "stateful" and > NFSv3 being "stateless". > > Can you re-run your test but using NFSv3 on the client mount?? Or do > you need to use v4.x? > > Regards, > Alex > > On Tue, Aug 14, 2018 at 6:11 AM Karli Sj?berg <karli at inparadise.se > <mailto:karli at inparadise.se>> wrote: > > On Fri, 2018-08-10 at 09:39 -0400, Kaleb S. KEITHLEY wrote: > > On 08/10/2018 09:23 AM, Karli Sj?berg wrote: > > > On Fri, 2018-08-10 at 21:23 +0800, Pui Edylie wrote: > > > > Hi Karli, > > > > > > > > Storhaug works with glusterfs 4.1.2 and latest nfs-ganesha. > > > > > > > > I just installed them last weekend ... they are working very > well > > > > :) > > > > > > Okay, awesome! > > > > > > Is there any documentation on how to do that? > > > > > > > https://github.com/gluster/storhaug/wiki > > > > Thanks Kaleb and Edy! > > I have now redone the cluster using the latest and greatest following > the above guide and repeated the same test I was doing before (the > rsync while loop) with success. I let (forgot) it run for about a day > and it was still chugging along nicely when I aborted it, so success > there! > > On to the next test; the catastrophic failure test- where one of the > servers dies, I'm having a more difficult time with. > > 1) I start with mounting the share over NFS 4.1 and then proceed with > writing a 8 GiB large random data file with 'dd', while "hard-cutting" > the power to the server I'm writing to, the transfer just stops > indefinitely, until the server comes back again. Is that supposed to > happen? Like this: > > # dd if=/dev/urandom of=/var/tmp/test.bin bs=1M count=8192 > # mount -o vers=4.1 hv03v.localdomain:/data /mnt/ > # dd if=/var/tmp/test.bin of=/mnt/test.bin bs=1M status=progress > 2434793472 bytes (2,4 GB, 2,3 GiB) copied, 42 s, 57,9 MB/s > > (here I cut the power and let it be for almost two hours before > turning > it on again) > > dd: error writing '/mnt/test.bin': Remote I/O error > 2325+0 records in > 2324+0 records out > 2436890624 bytes (2,4 GB, 2,3 GiB) copied, 6944,84 s, 351 kB/s > # umount /mnt > > Here the unmount command hung and I had to hard reset the client. > > 2) Another question I have is why some files "change" as you copy them > out to the Gluster storage? Is that the way it should be? This time, I > deleted eveything in the destination directory to start over: > > # mount -o vers=4.1 hv03v.localdomain:/data /mnt/ > # rm -f /mnt/test.bin > # dd if=/var/tmp/test.bin of=/mnt/test.bin bs=1M status=progress > 8557428736 bytes (8,6 GB, 8,0 GiB) copied, 122 s, 70,1 MB/s > 8192+0 records in > 8192+0 records out > 8589934592 bytes (8,6 GB, 8,0 GiB) copied, 123,039 s, 69,8 MB/s > # md5sum /var/tmp/test.bin > 073867b68fa8eaa382ffe05adb90b583? /var/tmp/test.bin > # md5sum /mnt/test.bin > 634187d367f856f3f5fb31846f796397? /mnt/test.bin > # umount /mnt > > Thanks in advance! > > /K > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > https://lists.gluster.org/mailman/listinfo/gluster-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20180815/8525ac5c/attachment.html>