Marcus Pedersén
2018-Jul-16 19:59 UTC
[Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Hi Kotresh,
I have been testing for a bit and as you can see from the logs I sent before
permission is denied for geouser on slave node on file:
/var/log/glusterfs/cli.log
I have turned selinux off and just for testing I changed permissions on
/var/log/glusterfs/cli.log so geouser can access it.
Starting geo-replication after that gives response successful but all nodes get
status Faulty.
If I run: gluster-mountbroker status
I get:
+-----------------------------+-------------+---------------------------+--------------+--------------------------+
| NODE | NODE STATUS | MOUNT ROOT |
GROUP | USERS |
+-----------------------------+-------------+---------------------------+--------------+--------------------------+
| urd-gds-geo-001.hgen.slu.se | UP | /var/mountbroker-root(OK) |
geogroup(OK) | geouser(urd-gds-volume) |
| urd-gds-geo-002 | UP | /var/mountbroker-root(OK) |
geogroup(OK) | geouser(urd-gds-volume) |
| localhost | UP | /var/mountbroker-root(OK) |
geogroup(OK) | geouser(urd-gds-volume) |
+-----------------------------+-------------+---------------------------+--------------+--------------------------+
and that is all nodes on slave cluster, so mountbroker seems ok.
gsyncd.log logs an error about /usr/local/sbin/gluster is missing.
That is correct cos gluster is in /sbin/gluster and /urs/sbin/gluster
Another error is that SSH between master and slave is broken,
but now when I have changed permission on /var/log/glusterfs/cli.log I can run:
ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i
/var/lib/glusterd/geo-replication/secret.pem -p 22 geouser at urd-gds-geo-001
gluster --xml --remote-host=localhost volume info urd-gds-volume
as geouser and that works, which means that the ssh connection works.
Is the permissions on /var/log/glusterfs/cli.log changed when geo-replication is
setup?
Is gluster supposed to be in /usr/local/sbin/gluster?
Do I have any options or should I remove current geo-replication and create a
new?
How much do I need to clean up before creating a new geo-replication?
In that case can I pause geo-replication, mount slave cluster on master cluster
and run rsync , just to speed up transfer of files?
Many thanks in advance!
Marcus Peders?n
Part from the gsyncd.log:
[2018-07-16 19:34:56.26287] E [syncdutils(worker /urd-gds/gluster):749:errlog]
Popen: command returned error cmd=ssh -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replicatio\
n/secret.pem -p 22 -oControlMaster=auto -S
/tmp/gsyncd-aux-ssh-WrbZ22/bf60c68f1a195dad59573a8dbaa309f2.sock geouser at
urd-gds-geo-001 /nonexistent/gsyncd slave urd-gds-volume geouser at
urd-gds-geo-001::urd-gds-volu\
me --master-node urd-gds-001 --master-node-id
912bebfd-1a7f-44dc-b0b7-f001a20d58cd --master-brick /urd-gds/gluster
--local-node urd-gds-geo-000 --local-node-id
03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\
ut 120 --slave-log-level INFO --slave-gluster-log-level INFO
--slave-gluster-command-dir /usr/local/sbin/ error=1
[2018-07-16 19:34:56.26583] E [syncdutils(worker /urd-gds/gluster):753:logerr]
Popen: ssh> failure: execution of "/usr/local/sbin/gluster" failed
with ENOENT (No such file or directory)
[2018-07-16 19:34:56.33901] I [repce(agent /urd-gds/gluster):89:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-16 19:34:56.34307] I [monitor(monitor):262:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-16 19:35:06.59412] I [monitor(monitor):158:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
[2018-07-16 19:35:06.99509] I [gsyncd(worker /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-16 19:35:06.99561] I [gsyncd(agent /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-16 19:35:06.100481] I [changelogagent(agent
/urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
[2018-07-16 19:35:06.108834] I [resource(worker
/urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between
master and slave...
[2018-07-16 19:35:06.762320] E [syncdutils(worker
/urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is
broken
[2018-07-16 19:35:06.763103] E [syncdutils(worker /urd-gds/gluster):749:errlog]
Popen: command returned error cmd=ssh -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replicatio\
n/secret.pem -p 22 -oControlMaster=auto -S
/tmp/gsyncd-aux-ssh-K9mB6Q/bf60c68f1a195dad59573a8dbaa309f2.sock geouser at
urd-gds-geo-001 /nonexistent/gsyncd slave urd-gds-volume geouser at
urd-gds-geo-001::urd-gds-volu\
me --master-node urd-gds-001 --master-node-id
912bebfd-1a7f-44dc-b0b7-f001a20d58cd --master-brick /urd-gds/gluster
--local-node urd-gds-geo-000 --local-node-id
03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\
ut 120 --slave-log-level INFO --slave-gluster-log-level INFO
--slave-gluster-command-dir /usr/local/sbin/ error=1
[2018-07-16 19:35:06.763398] E [syncdutils(worker /urd-gds/gluster):753:logerr]
Popen: ssh> failure: execution of "/usr/local/sbin/gluster" failed
with ENOENT (No such file or directory)
[2018-07-16 19:35:06.771905] I [repce(agent /urd-gds/gluster):89:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-16 19:35:06.772272] I [monitor(monitor):262:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-16 19:35:16.786387] I [monitor(monitor):158:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
[2018-07-16 19:35:16.828056] I [gsyncd(worker /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-16 19:35:16.828066] I [gsyncd(agent /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-16 19:35:16.828912] I [changelogagent(agent
/urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
[2018-07-16 19:35:16.837100] I [resource(worker
/urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between
master and slave...
[2018-07-16 19:35:17.260257] E [syncdutils(worker
/urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is
broken
________________________________
Fr?n: gluster-users-bounces at gluster.org <gluster-users-bounces at
gluster.org> f?r Marcus Peders?n <marcus.pedersen at slu.se>
Skickat: den 13 juli 2018 14:50
Till: Kotresh Hiremath Ravishankar
Kopia: gluster-users at gluster.org
?mne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Hi Kotresh,
Yes, all nodes have the same version 4.1.1 both master and slave.
All glusterd are crashing on the master side.
Will send logs tonight.
Thanks,
Marcus
################
Marcus Peders?n
Systemadministrator
Interbull Centre
################
Sent from my phone
################
Den 13 juli 2018 11:28 skrev Kotresh Hiremath Ravishankar <khiremat at
redhat.com>:
Hi Marcus,
Is the gluster geo-rep version is same on both master and slave?
Thanks,
Kotresh HR
On Fri, Jul 13, 2018 at 1:26 AM, Marcus Peders?n <marcus.pedersen at
slu.se<mailto:marcus.pedersen at slu.se>> wrote:
Hi Kotresh,
i have replaced both files
(gsyncdconfig.py<https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/gsyncdconfig.py>
and
repce.py<https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/repce.py>)
in all nodes both master and slave.
I rebooted all servers but geo-replication status is still Stopped.
I tried to start geo-replication with response Successful but status still show
Stopped on all nodes.
Nothing has been written to geo-replication logs since I sent the tail of the
log.
So I do not know what info to provide?
Please, help me to find a way to solve this.
Thanks!
Regards
Marcus
________________________________
Fr?n: gluster-users-bounces at gluster.org<mailto:gluster-users-bounces at
gluster.org> <gluster-users-bounces at
gluster.org<mailto:gluster-users-bounces at gluster.org>> f?r Marcus
Peders?n <marcus.pedersen at slu.se<mailto:marcus.pedersen at
slu.se>>
Skickat: den 12 juli 2018 08:51
Till: Kotresh Hiremath Ravishankar
Kopia: gluster-users at gluster.org<mailto:gluster-users at gluster.org>
?mne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Thanks Kotresh,
I installed through the official centos channel, centos-release-gluster41.
Isn't this fix included in centos install?
I will have a look, test it tonight and come back to you!
Thanks a lot!
Regards
Marcus
################
Marcus Peders?n
Systemadministrator
Interbull Centre
################
Sent from my phone
################
Den 12 juli 2018 07:41 skrev Kotresh Hiremath Ravishankar <khiremat at
redhat.com<mailto:khiremat at redhat.com>>:
Hi Marcus,
I think the fix [1] is needed in 4.1
Could you please this out and let us know if that works for you?
[1] https://review.gluster.org/#/c/20207/
Thanks,
Kotresh HR
On Thu, Jul 12, 2018 at 1:49 AM, Marcus Peders?n <marcus.pedersen at
slu.se<mailto:marcus.pedersen at slu.se>> wrote:
Hi all,
I have upgraded from 3.12.9 to 4.1.1 and been following upgrade instructions for
offline upgrade.
I upgraded geo-replication side first 1 x (2+1) and the master side after that 2
x (2+1).
Both clusters works the way they should on their own.
After upgrade on master side status for all geo-replication nodes is Stopped.
I tried to start the geo-replication from master node and response back was
started successfully.
Status again .... Stopped
Tried to start again and get response started successfully, after that all
glusterd crashed on all master nodes.
After a restart of all glusterd the master cluster was up again.
Status for geo-replication is still Stopped and every try to start it after this
gives the response successful but still status Stopped.
Please help me get the geo-replication up and running again.
Best regards
Marcus Peders?n
Part of geo-replication log from master node:
[2018-07-11 18:42:48.941760] I [changelogagent(/urd-gds/gluster):73:__init__]
ChangelogAgent: Agent listining...
[2018-07-11 18:42:48.947567] I [resource(/urd-gds/gluster):1780:connect_remote]
SSH: Initializing SSH connection between master and slave...
[2018-07-11 18:42:49.363514] E
[syncdutils(/urd-gds/gluster):304:log_raise_exception] <top>: connection
to peer is broken
[2018-07-11 18:42:49.364279] E [resource(/urd-gds/gluster):210:errlog] Popen:
command returned error cmd=ssh -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
.pem -p 22 -oControlMaster=auto -S
/tmp/gsyncd-aux-ssh-hjRhBo/7e5534547f3675a710a107722317484f.sock geouser at
urd-gds-geo-000 /nonexistent/gsyncd --session-owner
5e94eb7d-219f-4741-a179-d4ae6b50c7ee --local-id .%\
2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120
gluster://localhost:urd-gds-volume error=2
[2018-07-11 18:42:49.364586] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> usage: gsyncd.py [-h]
[2018-07-11 18:42:49.364799] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh>
[2018-07-11 18:42:49.364989] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh>
{monitor-status,monitor,worker,agent,slave,status,config-check,config-get,config-set,config-reset,voluuidget,d\
elete}
[2018-07-11 18:42:49.365210] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> ...
[2018-07-11 18:42:49.365408] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> gsyncd.py: error: argument subcmd: invalid choice:
'5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from
'monitor-status', 'monit\
or', 'worker', 'agent', 'slave', 'status',
'config-check', 'config-get', 'config-set',
'config-reset', 'voluuidget', 'delete')
[2018-07-11 18:42:49.365919] I [syncdutils(/urd-gds/gluster):271:finalize]
<top>: exiting.
[2018-07-11 18:42:49.369316] I [repce(/urd-gds/gluster):92:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-11 18:42:49.369921] I [syncdutils(/urd-gds/gluster):271:finalize]
<top>: exiting.
[2018-07-11 18:42:49.369694] I [monitor(monitor):353:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-11 18:42:59.492762] I [monitor(monitor):280:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=ssh://geouser at
urd-gds-geo-000:gluster://localhost:urd-gds-volume
[2018-07-11 18:42:59.558491] I [resource(/urd-gds/gluster):1780:connect_remote]
SSH: Initializing SSH connection between master and slave...
[2018-07-11 18:42:59.559056] I [changelogagent(/urd-gds/gluster):73:__init__]
ChangelogAgent: Agent listining...
[2018-07-11 18:42:59.945693] E
[syncdutils(/urd-gds/gluster):304:log_raise_exception] <top>: connection
to peer is broken
[2018-07-11 18:42:59.946439] E [resource(/urd-gds/gluster):210:errlog] Popen:
command returned error cmd=ssh -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
.pem -p 22 -oControlMaster=auto -S
/tmp/gsyncd-aux-ssh-992bk7/7e5534547f3675a710a107722317484f.sock geouser at
urd-gds-geo-000 /nonexistent/gsyncd --session-owner
5e94eb7d-219f-4741-a179-d4ae6b50c7ee --local-id .%\
2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120
gluster://localhost:urd-gds-volume error=2
[2018-07-11 18:42:59.946748] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> usage: gsyncd.py [-h]
[2018-07-11 18:42:59.946962] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh>
[2018-07-11 18:42:59.947150] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh>
{monitor-status,monitor,worker,agent,slave,status,config-check,config-get,config-set,config-reset,voluuidget,d\
elete}
[2018-07-11 18:42:59.947369] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> ...
[2018-07-11 18:42:59.947552] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> gsyncd.py: error: argument subcmd: invalid choice:
'5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from
'monitor-status', 'monit\
or', 'worker', 'agent', 'slave', 'status',
'config-check', 'config-get', 'config-set',
'config-reset', 'voluuidget', 'delete')
[2018-07-11 18:42:59.948046] I [syncdutils(/urd-gds/gluster):271:finalize]
<top>: exiting.
[2018-07-11 18:42:59.951392] I [repce(/urd-gds/gluster):92:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-11 18:42:59.951760] I [syncdutils(/urd-gds/gluster):271:finalize]
<top>: exiting.
[2018-07-11 18:42:59.951817] I [monitor(monitor):353:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-11 18:43:10.54580] I [monitor(monitor):280:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=ssh://geouser at
urd-gds-geo-000:gluster://localhost:urd-gds-volume
[2018-07-11 18:43:10.88356] I [monitor(monitor):345:monitor] Monitor: Changelog
Agent died, Aborting Worker brick=/urd-gds/gluster
[2018-07-11 18:43:10.88613] I [monitor(monitor):353:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-11 18:43:20.112435] I [gsyncdstatus(monitor):242:set_worker_status]
GeorepStatus: Worker Status Change status=inconsistent
[2018-07-11 18:43:20.112885] E [syncdutils(monitor):331:log_raise_exception]
<top>: FAIL:
Traceback (most recent call last):
File "/usr/libexec/glusterfs/python/syncdaemon/syncdutils.py", line
361, in twrap
except:
File "/usr/libexec/glusterfs/python/syncdaemon/monitor.py", line
428, in wmon
sys.exit()
TypeError: 'int' object is not iterable
[2018-07-11 18:43:20.114610] I [syncdutils(monitor):271:finalize] <top>:
exiting.
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
https://lists.gluster.org/mailman/listinfo/gluster-users
--
Thanks and Regards,
Kotresh H R
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
--
Thanks and Regards,
Kotresh H R
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.gluster.org/pipermail/gluster-users/attachments/20180716/edf68eab/attachment.html>
Marcus Pedersén
2018-Jul-17 19:57 UTC
[Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Hi again,
I continue to do some testing, but now I have come to a stage where I need help.
gsyncd.log was complaining about that /usr/local/sbin/gluster was missing so I
made a link.
After that /usr/local/sbin/glusterfs was missing so I made a link there as well.
Both links were done on all slave nodes.
Now I have a new error that I can not resolve myself.
It can not open libgfchangelog.so
Many thanks!
Regards
Marcus Peders?n
Part of gsyncd.log:
OSError: libgfchangelog.so: cannot open shared object file: No such file or
directory
[2018-07-17 19:32:06.517106] I [repce(agent /urd-gds/gluster):89:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-17 19:32:07.479553] I [monitor(monitor):272:monitor] Monitor: worker
died in startup phase brick=/urd-gds/gluster
[2018-07-17 19:32:17.500709] I [monitor(monitor):158:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
[2018-07-17 19:32:17.541547] I [gsyncd(agent /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-17 19:32:17.541959] I [gsyncd(worker /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-17 19:32:17.542363] I [changelogagent(agent
/urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
[2018-07-17 19:32:17.550894] I [resource(worker
/urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between
master and slave...
[2018-07-17 19:32:19.166246] I [resource(worker
/urd-gds/gluster):1395:connect_remote] SSH: SSH connection between master and
slave established. duration=1.6151
[2018-07-17 19:32:19.166806] I [resource(worker /urd-gds/gluster):1067:connect]
GLUSTER: Mounting gluster volume locally...
[2018-07-17 19:32:20.257344] I [resource(worker /urd-gds/gluster):1090:connect]
GLUSTER: Mounted gluster volume duration=1.0901
[2018-07-17 19:32:20.257921] I [subcmds(worker
/urd-gds/gluster):70:subcmd_worker] <top>: Worker spawn successful.
Acknowledging back to monitor
[2018-07-17 19:32:20.274647] E [repce(agent /urd-gds/gluster):114:worker]
<top>: call failed:
Traceback (most recent call last):
File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 110,
in worker
res = getattr(self.obj, rmeth)(*in_data[2:])
File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py",
line 37, in init
return Changes.cl_init()
File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py",
line 21, in __getattr__
from libgfchangelog import Changes as LChanges
File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py",
line 17, in <module>
class Changes(object):
File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py",
line 19, in Changes
use_errno=True)
File "/usr/lib64/python2.7/ctypes/__init__.py", line 360, in
__init__
self._handle = _dlopen(self._name, mode)
OSError: libgfchangelog.so: cannot open shared object file: No such file or
directory
[2018-07-17 19:32:20.275093] E [repce(worker /urd-gds/gluster):206:__call__]
RepceClient: call failed call=6078:139982918485824:1531855940.27 method=init
error=OSError
[2018-07-17 19:32:20.275192] E [syncdutils(worker
/urd-gds/gluster):330:log_raise_exception] <top>: FAIL:
Traceback (most recent call last):
File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 311,
in main
func(args)
File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line 72,
in subcmd_worker
local.service_loop(remote)
File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line
1236, in service_loop
changelog_agent.init()
File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 225,
in __call__
return self.ins(self.meth, *a)
File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 207,
in __call__
raise res
OSError: libgfchangelog.so: cannot open shared object file: No such file or
directory
[2018-07-17 19:32:20.286787] I [repce(agent /urd-gds/gluster):89:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-17 19:32:21.259891] I [monitor(monitor):272:monitor] Monitor: worker
died in startup phase brick=/urd-gds/gluster
________________________________
Fr?n: gluster-users-bounces at gluster.org <gluster-users-bounces at
gluster.org> f?r Marcus Peders?n <marcus.pedersen at slu.se>
Skickat: den 16 juli 2018 21:59
Till: khiremat at redhat.com
Kopia: gluster-users at gluster.org
?mne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Hi Kotresh,
I have been testing for a bit and as you can see from the logs I sent before
permission is denied for geouser on slave node on file:
/var/log/glusterfs/cli.log
I have turned selinux off and just for testing I changed permissions on
/var/log/glusterfs/cli.log so geouser can access it.
Starting geo-replication after that gives response successful but all nodes get
status Faulty.
If I run: gluster-mountbroker status
I get:
+-----------------------------+-------------+---------------------------+--------------+--------------------------+
| NODE | NODE STATUS | MOUNT ROOT |
GROUP | USERS |
+-----------------------------+-------------+---------------------------+--------------+--------------------------+
| urd-gds-geo-001.hgen.slu.se | UP | /var/mountbroker-root(OK) |
geogroup(OK) | geouser(urd-gds-volume) |
| urd-gds-geo-002 | UP | /var/mountbroker-root(OK) |
geogroup(OK) | geouser(urd-gds-volume) |
| localhost | UP | /var/mountbroker-root(OK) |
geogroup(OK) | geouser(urd-gds-volume) |
+-----------------------------+-------------+---------------------------+--------------+--------------------------+
and that is all nodes on slave cluster, so mountbroker seems ok.
gsyncd.log logs an error about /usr/local/sbin/gluster is missing.
That is correct cos gluster is in /sbin/gluster and /urs/sbin/gluster
Another error is that SSH between master and slave is broken,
but now when I have changed permission on /var/log/glusterfs/cli.log I can run:
ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i
/var/lib/glusterd/geo-replication/secret.pem -p 22 geouser at urd-gds-geo-001
gluster --xml --remote-host=localhost volume info urd-gds-volume
as geouser and that works, which means that the ssh connection works.
Is the permissions on /var/log/glusterfs/cli.log changed when geo-replication is
setup?
Is gluster supposed to be in /usr/local/sbin/gluster?
Do I have any options or should I remove current geo-replication and create a
new?
How much do I need to clean up before creating a new geo-replication?
In that case can I pause geo-replication, mount slave cluster on master cluster
and run rsync , just to speed up transfer of files?
Many thanks in advance!
Marcus Peders?n
Part from the gsyncd.log:
[2018-07-16 19:34:56.26287] E [syncdutils(worker /urd-gds/gluster):749:errlog]
Popen: command returned error cmd=ssh -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replicatio\
n/secret.pem -p 22 -oControlMaster=auto -S
/tmp/gsyncd-aux-ssh-WrbZ22/bf60c68f1a195dad59573a8dbaa309f2.sock geouser at
urd-gds-geo-001 /nonexistent/gsyncd slave urd-gds-volume geouser at
urd-gds-geo-001::urd-gds-volu\
me --master-node urd-gds-001 --master-node-id
912bebfd-1a7f-44dc-b0b7-f001a20d58cd --master-brick /urd-gds/gluster
--local-node urd-gds-geo-000 --local-node-id
03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\
ut 120 --slave-log-level INFO --slave-gluster-log-level INFO
--slave-gluster-command-dir /usr/local/sbin/ error=1
[2018-07-16 19:34:56.26583] E [syncdutils(worker /urd-gds/gluster):753:logerr]
Popen: ssh> failure: execution of "/usr/local/sbin/gluster" failed
with ENOENT (No such file or directory)
[2018-07-16 19:34:56.33901] I [repce(agent /urd-gds/gluster):89:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-16 19:34:56.34307] I [monitor(monitor):262:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-16 19:35:06.59412] I [monitor(monitor):158:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
[2018-07-16 19:35:06.99509] I [gsyncd(worker /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-16 19:35:06.99561] I [gsyncd(agent /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-16 19:35:06.100481] I [changelogagent(agent
/urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
[2018-07-16 19:35:06.108834] I [resource(worker
/urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between
master and slave...
[2018-07-16 19:35:06.762320] E [syncdutils(worker
/urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is
broken
[2018-07-16 19:35:06.763103] E [syncdutils(worker /urd-gds/gluster):749:errlog]
Popen: command returned error cmd=ssh -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replicatio\
n/secret.pem -p 22 -oControlMaster=auto -S
/tmp/gsyncd-aux-ssh-K9mB6Q/bf60c68f1a195dad59573a8dbaa309f2.sock geouser at
urd-gds-geo-001 /nonexistent/gsyncd slave urd-gds-volume geouser at
urd-gds-geo-001::urd-gds-volu\
me --master-node urd-gds-001 --master-node-id
912bebfd-1a7f-44dc-b0b7-f001a20d58cd --master-brick /urd-gds/gluster
--local-node urd-gds-geo-000 --local-node-id
03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\
ut 120 --slave-log-level INFO --slave-gluster-log-level INFO
--slave-gluster-command-dir /usr/local/sbin/ error=1
[2018-07-16 19:35:06.763398] E [syncdutils(worker /urd-gds/gluster):753:logerr]
Popen: ssh> failure: execution of "/usr/local/sbin/gluster" failed
with ENOENT (No such file or directory)
[2018-07-16 19:35:06.771905] I [repce(agent /urd-gds/gluster):89:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-16 19:35:06.772272] I [monitor(monitor):262:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-16 19:35:16.786387] I [monitor(monitor):158:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
[2018-07-16 19:35:16.828056] I [gsyncd(worker /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-16 19:35:16.828066] I [gsyncd(agent /urd-gds/gluster):297:main]
<top>: Using session config file
path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
[2018-07-16 19:35:16.828912] I [changelogagent(agent
/urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
[2018-07-16 19:35:16.837100] I [resource(worker
/urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between
master and slave...
[2018-07-16 19:35:17.260257] E [syncdutils(worker
/urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is
broken
________________________________
Fr?n: gluster-users-bounces at gluster.org <gluster-users-bounces at
gluster.org> f?r Marcus Peders?n <marcus.pedersen at slu.se>
Skickat: den 13 juli 2018 14:50
Till: Kotresh Hiremath Ravishankar
Kopia: gluster-users at gluster.org
?mne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Hi Kotresh,
Yes, all nodes have the same version 4.1.1 both master and slave.
All glusterd are crashing on the master side.
Will send logs tonight.
Thanks,
Marcus
################
Marcus Peders?n
Systemadministrator
Interbull Centre
################
Sent from my phone
################
Den 13 juli 2018 11:28 skrev Kotresh Hiremath Ravishankar <khiremat at
redhat.com>:
Hi Marcus,
Is the gluster geo-rep version is same on both master and slave?
Thanks,
Kotresh HR
On Fri, Jul 13, 2018 at 1:26 AM, Marcus Peders?n <marcus.pedersen at
slu.se<mailto:marcus.pedersen at slu.se>> wrote:
Hi Kotresh,
i have replaced both files
(gsyncdconfig.py<https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/gsyncdconfig.py>
and
repce.py<https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/repce.py>)
in all nodes both master and slave.
I rebooted all servers but geo-replication status is still Stopped.
I tried to start geo-replication with response Successful but status still show
Stopped on all nodes.
Nothing has been written to geo-replication logs since I sent the tail of the
log.
So I do not know what info to provide?
Please, help me to find a way to solve this.
Thanks!
Regards
Marcus
________________________________
Fr?n: gluster-users-bounces at gluster.org<mailto:gluster-users-bounces at
gluster.org> <gluster-users-bounces at
gluster.org<mailto:gluster-users-bounces at gluster.org>> f?r Marcus
Peders?n <marcus.pedersen at slu.se<mailto:marcus.pedersen at
slu.se>>
Skickat: den 12 juli 2018 08:51
Till: Kotresh Hiremath Ravishankar
Kopia: gluster-users at gluster.org<mailto:gluster-users at gluster.org>
?mne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Thanks Kotresh,
I installed through the official centos channel, centos-release-gluster41.
Isn't this fix included in centos install?
I will have a look, test it tonight and come back to you!
Thanks a lot!
Regards
Marcus
################
Marcus Peders?n
Systemadministrator
Interbull Centre
################
Sent from my phone
################
Den 12 juli 2018 07:41 skrev Kotresh Hiremath Ravishankar <khiremat at
redhat.com<mailto:khiremat at redhat.com>>:
Hi Marcus,
I think the fix [1] is needed in 4.1
Could you please this out and let us know if that works for you?
[1] https://review.gluster.org/#/c/20207/
Thanks,
Kotresh HR
On Thu, Jul 12, 2018 at 1:49 AM, Marcus Peders?n <marcus.pedersen at
slu.se<mailto:marcus.pedersen at slu.se>> wrote:
Hi all,
I have upgraded from 3.12.9 to 4.1.1 and been following upgrade instructions for
offline upgrade.
I upgraded geo-replication side first 1 x (2+1) and the master side after that 2
x (2+1).
Both clusters works the way they should on their own.
After upgrade on master side status for all geo-replication nodes is Stopped.
I tried to start the geo-replication from master node and response back was
started successfully.
Status again .... Stopped
Tried to start again and get response started successfully, after that all
glusterd crashed on all master nodes.
After a restart of all glusterd the master cluster was up again.
Status for geo-replication is still Stopped and every try to start it after this
gives the response successful but still status Stopped.
Please help me get the geo-replication up and running again.
Best regards
Marcus Peders?n
Part of geo-replication log from master node:
[2018-07-11 18:42:48.941760] I [changelogagent(/urd-gds/gluster):73:__init__]
ChangelogAgent: Agent listining...
[2018-07-11 18:42:48.947567] I [resource(/urd-gds/gluster):1780:connect_remote]
SSH: Initializing SSH connection between master and slave...
[2018-07-11 18:42:49.363514] E
[syncdutils(/urd-gds/gluster):304:log_raise_exception] <top>: connection
to peer is broken
[2018-07-11 18:42:49.364279] E [resource(/urd-gds/gluster):210:errlog] Popen:
command returned error cmd=ssh -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
.pem -p 22 -oControlMaster=auto -S
/tmp/gsyncd-aux-ssh-hjRhBo/7e5534547f3675a710a107722317484f.sock geouser at
urd-gds-geo-000 /nonexistent/gsyncd --session-owner
5e94eb7d-219f-4741-a179-d4ae6b50c7ee --local-id .%\
2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120
gluster://localhost:urd-gds-volume error=2
[2018-07-11 18:42:49.364586] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> usage: gsyncd.py [-h]
[2018-07-11 18:42:49.364799] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh>
[2018-07-11 18:42:49.364989] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh>
{monitor-status,monitor,worker,agent,slave,status,config-check,config-get,config-set,config-reset,voluuidget,d\
elete}
[2018-07-11 18:42:49.365210] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> ...
[2018-07-11 18:42:49.365408] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> gsyncd.py: error: argument subcmd: invalid choice:
'5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from
'monitor-status', 'monit\
or', 'worker', 'agent', 'slave', 'status',
'config-check', 'config-get', 'config-set',
'config-reset', 'voluuidget', 'delete')
[2018-07-11 18:42:49.365919] I [syncdutils(/urd-gds/gluster):271:finalize]
<top>: exiting.
[2018-07-11 18:42:49.369316] I [repce(/urd-gds/gluster):92:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-11 18:42:49.369921] I [syncdutils(/urd-gds/gluster):271:finalize]
<top>: exiting.
[2018-07-11 18:42:49.369694] I [monitor(monitor):353:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-11 18:42:59.492762] I [monitor(monitor):280:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=ssh://geouser at
urd-gds-geo-000:gluster://localhost:urd-gds-volume
[2018-07-11 18:42:59.558491] I [resource(/urd-gds/gluster):1780:connect_remote]
SSH: Initializing SSH connection between master and slave...
[2018-07-11 18:42:59.559056] I [changelogagent(/urd-gds/gluster):73:__init__]
ChangelogAgent: Agent listining...
[2018-07-11 18:42:59.945693] E
[syncdutils(/urd-gds/gluster):304:log_raise_exception] <top>: connection
to peer is broken
[2018-07-11 18:42:59.946439] E [resource(/urd-gds/gluster):210:errlog] Popen:
command returned error cmd=ssh -oPasswordAuthentication=no
-oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
.pem -p 22 -oControlMaster=auto -S
/tmp/gsyncd-aux-ssh-992bk7/7e5534547f3675a710a107722317484f.sock geouser at
urd-gds-geo-000 /nonexistent/gsyncd --session-owner
5e94eb7d-219f-4741-a179-d4ae6b50c7ee --local-id .%\
2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120
gluster://localhost:urd-gds-volume error=2
[2018-07-11 18:42:59.946748] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> usage: gsyncd.py [-h]
[2018-07-11 18:42:59.946962] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh>
[2018-07-11 18:42:59.947150] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh>
{monitor-status,monitor,worker,agent,slave,status,config-check,config-get,config-set,config-reset,voluuidget,d\
elete}
[2018-07-11 18:42:59.947369] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> ...
[2018-07-11 18:42:59.947552] E [resource(/urd-gds/gluster):214:logerr] Popen:
ssh> gsyncd.py: error: argument subcmd: invalid choice:
'5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from
'monitor-status', 'monit\
or', 'worker', 'agent', 'slave', 'status',
'config-check', 'config-get', 'config-set',
'config-reset', 'voluuidget', 'delete')
[2018-07-11 18:42:59.948046] I [syncdutils(/urd-gds/gluster):271:finalize]
<top>: exiting.
[2018-07-11 18:42:59.951392] I [repce(/urd-gds/gluster):92:service_loop]
RepceServer: terminating on reaching EOF.
[2018-07-11 18:42:59.951760] I [syncdutils(/urd-gds/gluster):271:finalize]
<top>: exiting.
[2018-07-11 18:42:59.951817] I [monitor(monitor):353:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-11 18:43:10.54580] I [monitor(monitor):280:monitor] Monitor: starting
gsyncd worker brick=/urd-gds/gluster slave_node=ssh://geouser at
urd-gds-geo-000:gluster://localhost:urd-gds-volume
[2018-07-11 18:43:10.88356] I [monitor(monitor):345:monitor] Monitor: Changelog
Agent died, Aborting Worker brick=/urd-gds/gluster
[2018-07-11 18:43:10.88613] I [monitor(monitor):353:monitor] Monitor: worker
died before establishing connection brick=/urd-gds/gluster
[2018-07-11 18:43:20.112435] I [gsyncdstatus(monitor):242:set_worker_status]
GeorepStatus: Worker Status Change status=inconsistent
[2018-07-11 18:43:20.112885] E [syncdutils(monitor):331:log_raise_exception]
<top>: FAIL:
Traceback (most recent call last):
File "/usr/libexec/glusterfs/python/syncdaemon/syncdutils.py", line
361, in twrap
except:
File "/usr/libexec/glusterfs/python/syncdaemon/monitor.py", line
428, in wmon
sys.exit()
TypeError: 'int' object is not iterable
[2018-07-11 18:43:20.114610] I [syncdutils(monitor):271:finalize] <top>:
exiting.
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
https://lists.gluster.org/mailman/listinfo/gluster-users
--
Thanks and Regards,
Kotresh H R
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
--
Thanks and Regards,
Kotresh H R
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
---
N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina
personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r
<https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more
information on how this is done, click here
<https://www.slu.se/en/about-slu/contact-slu/personal-data/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.gluster.org/pipermail/gluster-users/attachments/20180717/32878246/attachment.html>
Kotresh Hiremath Ravishankar
2018-Jul-18 03:58 UTC
[Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Hi Marcus, I am testing out 4.1 myself and I will have some update today. For this particular traceback, gsyncd is not able to find the library. Is it the rpm install? If so, gluster libraries would be in /usr/lib. Please run the cmd below. #ldconfig /usr/lib #ldconfig -p /usr/lib | grep libgf (This should list libgfchangelog.so) Geo-rep should be fixed automatically. Thanks, Kotresh HR On Wed, Jul 18, 2018 at 1:27 AM, Marcus Peders?n <marcus.pedersen at slu.se> wrote:> Hi again, > > I continue to do some testing, but now I have come to a stage where I need > help. > > > gsyncd.log was complaining about that /usr/local/sbin/gluster was missing > so I made a link. > > After that /usr/local/sbin/glusterfs was missing so I made a link there as > well. > > Both links were done on all slave nodes. > > > Now I have a new error that I can not resolve myself. > > It can not open libgfchangelog.so > > > Many thanks! > > Regards > > Marcus Peders?n > > > Part of gsyncd.log: > > OSError: libgfchangelog.so: cannot open shared object file: No such file > or directory > [2018-07-17 19:32:06.517106] I [repce(agent /urd-gds/gluster):89:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-17 19:32:07.479553] I [monitor(monitor):272:monitor] Monitor: > worker died in startup phase brick=/urd-gds/gluster > [2018-07-17 19:32:17.500709] I [monitor(monitor):158:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 > [2018-07-17 19:32:17.541547] I [gsyncd(agent /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-17 19:32:17.541959] I [gsyncd(worker /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-17 19:32:17.542363] I [changelogagent(agent > /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... > [2018-07-17 19:32:17.550894] I [resource(worker /urd-gds/gluster):1348:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-17 19:32:19.166246] I [resource(worker /urd-gds/gluster):1395:connect_remote] > SSH: SSH connection between master and slave established. > duration=1.6151 > [2018-07-17 19:32:19.166806] I [resource(worker /urd-gds/gluster):1067:connect] > GLUSTER: Mounting gluster volume locally... > [2018-07-17 19:32:20.257344] I [resource(worker /urd-gds/gluster):1090:connect] > GLUSTER: Mounted gluster volume duration=1.0901 > [2018-07-17 19:32:20.257921] I [subcmds(worker /urd-gds/gluster):70:subcmd_worker] > <top>: Worker spawn successful. Acknowledging back to monitor > [2018-07-17 19:32:20.274647] E [repce(agent /urd-gds/gluster):114:worker] > <top>: call failed: > Traceback (most recent call last): > File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 110, in > worker > res = getattr(self.obj, rmeth)(*in_data[2:]) > File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line > 37, in init > return Changes.cl_init() > File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line > 21, in __getattr__ > from libgfchangelog import Changes as LChanges > File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line > 17, in <module> > class Changes(object): > File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line > 19, in Changes > use_errno=True) > File "/usr/lib64/python2.7/ctypes/__init__.py", line 360, in __init__ > self._handle = _dlopen(self._name, mode) > OSError: libgfchangelog.so: cannot open shared object file: No such file > or directory > [2018-07-17 19:32:20.275093] E [repce(worker /urd-gds/gluster):206:__call__] > RepceClient: call failed call=6078:139982918485824:1531855940.27 > method=init error=OSError > [2018-07-17 19:32:20.275192] E [syncdutils(worker > /urd-gds/gluster):330:log_raise_exception] <top>: FAIL: > Traceback (most recent call last): > File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 311, in > main > func(args) > File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line 72, in > subcmd_worker > local.service_loop(remote) > File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line 1236, > in service_loop > changelog_agent.init() > File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 225, in > __call__ > return self.ins(self.meth, *a) > File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 207, in > __call__ > raise res > OSError: libgfchangelog.so: cannot open shared object file: No such file > or directory > [2018-07-17 19:32:20.286787] I [repce(agent /urd-gds/gluster):89:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-17 19:32:21.259891] I [monitor(monitor):272:monitor] Monitor: > worker died in startup phase brick=/urd-gds/gluster > > > > ------------------------------ > *Fr?n:* gluster-users-bounces at gluster.org <gluster-users-bounces@ > gluster.org> f?r Marcus Peders?n <marcus.pedersen at slu.se> > *Skickat:* den 16 juli 2018 21:59 > *Till:* khiremat at redhat.com > > *Kopia:* gluster-users at gluster.org > *?mne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work > > > Hi Kotresh, > > I have been testing for a bit and as you can see from the logs I sent > before permission is denied for geouser on slave node on file: > > /var/log/glusterfs/cli.log > > I have turned selinux off and just for testing I changed permissions on > /var/log/glusterfs/cli.log so geouser can access it. > > Starting geo-replication after that gives response successful but all > nodes get status Faulty. > > > If I run: gluster-mountbroker status > > I get: > > +-----------------------------+-------------+--------------- > ------------+--------------+--------------------------+ > | NODE | NODE STATUS | MOUNT ROOT > | GROUP | USERS | > +-----------------------------+-------------+--------------- > ------------+--------------+--------------------------+ > | urd-gds-geo-001.hgen.slu.se | UP | /var/mountbroker-root(OK) | > geogroup(OK) | geouser(urd-gds-volume) | > | urd-gds-geo-002 | UP | /var/mountbroker-root(OK) | > geogroup(OK) | geouser(urd-gds-volume) | > | localhost | UP | /var/mountbroker-root(OK) | > geogroup(OK) | geouser(urd-gds-volume) | > +-----------------------------+-------------+--------------- > ------------+--------------+--------------------------+ > > > and that is all nodes on slave cluster, so mountbroker seems ok. > > > gsyncd.log logs an error about /usr/local/sbin/gluster is missing. > > That is correct cos gluster is in /sbin/gluster and /urs/sbin/gluster > > Another error is that SSH between master and slave is broken, > > but now when I have changed permission on /var/log/glusterfs/cli.log I can > run: > > ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i > /var/lib/glusterd/geo-replication/secret.pem -p 22 geouser at urd-gds-geo-001 > gluster --xml --remote-host=localhost volume info urd-gds-volume > > as geouser and that works, which means that the ssh connection works. > > > Is the permissions on /var/log/glusterfs/cli.log changed when > geo-replication is setup? > > Is gluster supposed to be in /usr/local/sbin/gluster? > > > Do I have any options or should I remove current geo-replication and > create a new? > > How much do I need to clean up before creating a new geo-replication? > > In that case can I pause geo-replication, mount slave cluster on master > cluster and run rsync , just to speed up transfer of files? > > > Many thanks in advance! > > Marcus Peders?n > > > Part from the gsyncd.log: > > [2018-07-16 19:34:56.26287] E [syncdutils(worker > /urd-gds/gluster):749:errlog] Popen: command returned error cmd=ssh > -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i > /var/lib/glusterd/geo-replicatio\ > n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-WrbZ22/ > bf60c68f1a195dad59573a8dbaa309f2.sock geouser at urd-gds-geo-001 > /nonexistent/gsyncd slave urd-gds-volume geouser at urd-gds-geo-001::urd- > gds-volu\ > me --master-node urd-gds-001 --master-node-id 912bebfd-1a7f-44dc-b0b7-f001a20d58cd > --master-brick /urd-gds/gluster --local-node urd-gds-geo-000 > --local-node-id 03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\ > ut 120 --slave-log-level INFO --slave-gluster-log-level INFO > --slave-gluster-command-dir /usr/local/sbin/ error=1 > [2018-07-16 19:34:56.26583] E [syncdutils(worker > /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of > "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory) > [2018-07-16 19:34:56.33901] I [repce(agent /urd-gds/gluster):89:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-16 19:34:56.34307] I [monitor(monitor):262:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-16 19:35:06.59412] I [monitor(monitor):158:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 > [2018-07-16 19:35:06.99509] I [gsyncd(worker /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-16 19:35:06.99561] I [gsyncd(agent /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-16 19:35:06.100481] I [changelogagent(agent > /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... > [2018-07-16 19:35:06.108834] I [resource(worker /urd-gds/gluster):1348:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-16 19:35:06.762320] E [syncdutils(worker > /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is > broken > [2018-07-16 19:35:06.763103] E [syncdutils(worker > /urd-gds/gluster):749:errlog] Popen: command returned error cmd=ssh > -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i > /var/lib/glusterd/geo-replicatio\ > n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-K9mB6Q/ > bf60c68f1a195dad59573a8dbaa309f2.sock geouser at urd-gds-geo-001 > /nonexistent/gsyncd slave urd-gds-volume geouser at urd-gds-geo-001::urd- > gds-volu\ > me --master-node urd-gds-001 --master-node-id 912bebfd-1a7f-44dc-b0b7-f001a20d58cd > --master-brick /urd-gds/gluster --local-node urd-gds-geo-000 > --local-node-id 03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\ > ut 120 --slave-log-level INFO --slave-gluster-log-level INFO > --slave-gluster-command-dir /usr/local/sbin/ error=1 > [2018-07-16 19:35:06.763398] E [syncdutils(worker > /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of > "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory) > [2018-07-16 19:35:06.771905] I [repce(agent /urd-gds/gluster):89:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-16 19:35:06.772272] I [monitor(monitor):262:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-16 19:35:16.786387] I [monitor(monitor):158:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000 > [2018-07-16 19:35:16.828056] I [gsyncd(worker /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-16 19:35:16.828066] I [gsyncd(agent /urd-gds/gluster):297:main] > <top>: Using session config file path=/var/lib/glusterd/geo- > replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf > [2018-07-16 19:35:16.828912] I [changelogagent(agent > /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining... > [2018-07-16 19:35:16.837100] I [resource(worker /urd-gds/gluster):1348:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-16 19:35:17.260257] E [syncdutils(worker > /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is > broken > > ------------------------------ > *Fr?n:* gluster-users-bounces at gluster.org <gluster-users-bounces@ > gluster.org> f?r Marcus Peders?n <marcus.pedersen at slu.se> > *Skickat:* den 13 juli 2018 14:50 > *Till:* Kotresh Hiremath Ravishankar > *Kopia:* gluster-users at gluster.org > *?mne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work > > Hi Kotresh, > Yes, all nodes have the same version 4.1.1 both master and slave. > All glusterd are crashing on the master side. > Will send logs tonight. > > Thanks, > Marcus > > ################ > Marcus Peders?n > Systemadministrator > Interbull Centre > ################ > Sent from my phone > ################ > > Den 13 juli 2018 11:28 skrev Kotresh Hiremath Ravishankar < > khiremat at redhat.com>: > > Hi Marcus, > > Is the gluster geo-rep version is same on both master and slave? > > Thanks, > Kotresh HR > > On Fri, Jul 13, 2018 at 1:26 AM, Marcus Peders?n <marcus.pedersen at slu.se> > wrote: > > Hi Kotresh, > > i have replaced both files (gsyncdconfig.py > <https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/gsyncdconfig.py> > and repce.py > <https://review.gluster.org/#/c/20207/1/geo-replication/syncdaemon/repce.py>) > in all nodes both master and slave. > > I rebooted all servers but geo-replication status is still Stopped. > > I tried to start geo-replication with response Successful but status still > show Stopped on all nodes. > > Nothing has been written to geo-replication logs since I sent the tail of > the log. > > So I do not know what info to provide? > > > Please, help me to find a way to solve this. > > > Thanks! > > > Regards > > Marcus > > > ------------------------------ > *Fr?n:* gluster-users-bounces at gluster.org <gluster-users-bounces at gluster > .org> f?r Marcus Peders?n <marcus.pedersen at slu.se> > *Skickat:* den 12 juli 2018 08:51 > *Till:* Kotresh Hiremath Ravishankar > *Kopia:* gluster-users at gluster.org > *?mne:* Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work > > Thanks Kotresh, > I installed through the official centos channel, centos-release-gluster41. > Isn't this fix included in centos install? > I will have a look, test it tonight and come back to you! > > Thanks a lot! > > Regards > Marcus > > ################ > Marcus Peders?n > Systemadministrator > Interbull Centre > ################ > Sent from my phone > ################ > > Den 12 juli 2018 07:41 skrev Kotresh Hiremath Ravishankar < > khiremat at redhat.com>: > > Hi Marcus, > > I think the fix [1] is needed in 4.1 > Could you please this out and let us know if that works for you? > > [1] https://review.gluster.org/#/c/20207/ > > Thanks, > Kotresh HR > > On Thu, Jul 12, 2018 at 1:49 AM, Marcus Peders?n <marcus.pedersen at slu.se> > wrote: > > Hi all, > > I have upgraded from 3.12.9 to 4.1.1 and been following upgrade > instructions for offline upgrade. > > I upgraded geo-replication side first 1 x (2+1) and the master side after > that 2 x (2+1). > > Both clusters works the way they should on their own. > > After upgrade on master side status for all geo-replication nodes > is Stopped. > > I tried to start the geo-replication from master node and response back > was started successfully. > > Status again .... Stopped > > Tried to start again and get response started successfully, after that all > glusterd crashed on all master nodes. > > After a restart of all glusterd the master cluster was up again. > > Status for geo-replication is still Stopped and every try to start it > after this gives the response successful but still status Stopped. > > > Please help me get the geo-replication up and running again. > > > Best regards > > Marcus Peders?n > > > Part of geo-replication log from master node: > > [2018-07-11 18:42:48.941760] I [changelogagent(/urd-gds/gluster):73:__init__] > ChangelogAgent: Agent listining... > [2018-07-11 18:42:48.947567] I [resource(/urd-gds/gluster):1780:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-11 18:42:49.363514] E [syncdutils(/urd-gds/gluster):304:log_raise_exception] > <top>: connection to peer is broken > [2018-07-11 18:42:49.364279] E [resource(/urd-gds/gluster):210:errlog] > Popen: command returned error cmd=ssh -oPasswordAuthentication=no > -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\ > .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-hjRhBo/7e5 > 534547f3675a710a107722317484f.sock geouser at urd-gds-geo-000 > /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee > --local-id .%\ > 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 > gluster://localhost:urd-gds-volume error=2 > [2018-07-11 18:42:49.364586] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> usage: gsyncd.py [-h] > [2018-07-11 18:42:49.364799] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> > [2018-07-11 18:42:49.364989] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> {monitor-status,monitor,worker > ,agent,slave,status,config-check,config-get,config-set,confi > g-reset,voluuidget,d\ > elete} > [2018-07-11 18:42:49.365210] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> ... > [2018-07-11 18:42:49.365408] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: > '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', > 'monit\ > or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', > 'config-set', 'config-reset', 'voluuidget', 'delete') > [2018-07-11 18:42:49.365919] I [syncdutils(/urd-gds/gluster):271:finalize] > <top>: exiting. > [2018-07-11 18:42:49.369316] I [repce(/urd-gds/gluster):92:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-11 18:42:49.369921] I [syncdutils(/urd-gds/gluster):271:finalize] > <top>: exiting. > [2018-07-11 18:42:49.369694] I [monitor(monitor):353:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-11 18:42:59.492762] I [monitor(monitor):280:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster > slave_node=ssh://geouser at urd-gds-geo-000:gluster://localhost > :urd-gds-volume > [2018-07-11 18:42:59.558491] I [resource(/urd-gds/gluster):1780:connect_remote] > SSH: Initializing SSH connection between master and slave... > [2018-07-11 18:42:59.559056] I [changelogagent(/urd-gds/gluster):73:__init__] > ChangelogAgent: Agent listining... > [2018-07-11 18:42:59.945693] E [syncdutils(/urd-gds/gluster):304:log_raise_exception] > <top>: connection to peer is broken > [2018-07-11 18:42:59.946439] E [resource(/urd-gds/gluster):210:errlog] > Popen: command returned error cmd=ssh -oPasswordAuthentication=no > -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\ > .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-992bk7/7e5 > 534547f3675a710a107722317484f.sock geouser at urd-gds-geo-000 > /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee > --local-id .%\ > 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 > gluster://localhost:urd-gds-volume error=2 > [2018-07-11 18:42:59.946748] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> usage: gsyncd.py [-h] > [2018-07-11 18:42:59.946962] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> > [2018-07-11 18:42:59.947150] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> {monitor-status,monitor,worker > ,agent,slave,status,config-check,config-get,config-set,confi > g-reset,voluuidget,d\ > elete} > [2018-07-11 18:42:59.947369] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> ... > [2018-07-11 18:42:59.947552] E [resource(/urd-gds/gluster):214:logerr] > Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: > '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', > 'monit\ > or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', > 'config-set', 'config-reset', 'voluuidget', 'delete') > [2018-07-11 18:42:59.948046] I [syncdutils(/urd-gds/gluster):271:finalize] > <top>: exiting. > [2018-07-11 18:42:59.951392] I [repce(/urd-gds/gluster):92:service_loop] > RepceServer: terminating on reaching EOF. > [2018-07-11 18:42:59.951760] I [syncdutils(/urd-gds/gluster):271:finalize] > <top>: exiting. > [2018-07-11 18:42:59.951817] I [monitor(monitor):353:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-11 18:43:10.54580] I [monitor(monitor):280:monitor] Monitor: > starting gsyncd worker brick=/urd-gds/gluster > slave_node=ssh://geouser at urd-gds-geo-000:gluster://localhost > :urd-gds-volume > [2018-07-11 18:43:10.88356] I [monitor(monitor):345:monitor] Monitor: > Changelog Agent died, Aborting Worker brick=/urd-gds/gluster > [2018-07-11 18:43:10.88613] I [monitor(monitor):353:monitor] Monitor: > worker died before establishing connection brick=/urd-gds/gluster > [2018-07-11 18:43:20.112435] I [gsyncdstatus(monitor):242:set_worker_status] > GeorepStatus: Worker Status Change status=inconsistent > [2018-07-11 18:43:20.112885] E [syncdutils(monitor):331:log_raise_exception] > <top>: FAIL: > Traceback (most recent call last): > File "/usr/libexec/glusterfs/python/syncdaemon/syncdutils.py", line > 361, in twrap > except: > File "/usr/libexec/glusterfs/python/syncdaemon/monitor.py", line 428, > in wmon > sys.exit() > TypeError: 'int' object is not iterable > [2018-07-11 18:43:20.114610] I [syncdutils(monitor):271:finalize] <top>: > exiting. > > --- > N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina > personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > https://lists.gluster.org/mailman/listinfo/gluster-users > > > > > -- > Thanks and Regards, > Kotresh H R > > > --- > N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina > personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > --- > N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina > personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > > > > -- > Thanks and Regards, > Kotresh H R > > > --- > N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina > personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > --- > N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina > personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> > > --- > N?r du skickar e-post till SLU s? inneb?r detta att SLU behandlar dina > personuppgifter. F?r att l?sa mer om hur detta g?r till, klicka h?r > <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/> > E-mailing SLU will result in SLU processing your personal data. For more > information on how this is done, click here > <https://www.slu.se/en/about-slu/contact-slu/personal-data/> >-- Thanks and Regards, Kotresh H R -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20180718/2f3ae464/attachment.html>