thr3ads.net - Gluster users - [Gluster-users] [Possibile SPAM] Re: Problem with Gluster 3.12.4, VM and sharding [Jan 2018]

If this information is useful, please help other people find it:
Share via:

Krutika Dhananjay

2018-Jan-16 10:40 UTC

[Gluster-users] Problem with Gluster 3.12.4, VM and sharding

Also to help isolate the component, could you answer these:

1. on a different volume with shard not enabled, do you see this issue?
2. on a plain 3-way replicated volume (no arbiter), do you see this issue?



On Tue, Jan 16, 2018 at 4:03 PM, Krutika Dhananjay <kdhananj at
redhat.com>
wrote:
> Please share the volume-info output and the logs under /var/log/glusterfs/
> from all your nodes. for investigating the issue.
>
> -Krutika
>
> On Tue, Jan 16, 2018 at 1:30 PM, Ing. Luca Lazzeroni - Trend Servizi Srl
<
> luca at gvnet.it> wrote:
>
>> Hi to everyone.
>>
>> I've got a strange problem with a gluster setup: 3 nodes with
Centos 7.4,
>> Gluster 3.12.4 from Centos/Gluster repositories, QEMU-KVM version 2.9.0
>> (compiled from RHEL sources).
>>
>> I'm running volumes in replica 3 arbiter 1 mode (but I've got a
volume in
>> "pure" replica 3 mode too). I've applied the
"virt" group settings to my
>> volumes since they host VM images.
>>
>> If I try to install something (eg: Ubuntu Server 16.04.3) on a VM (and
so
>> I generate a bit of I/O inside it) and configure KVM to access gluster
>> volume directly (via libvirt), install fails after a while because the
disk
>> content is corrupted. If I inspect the block inside the disk (by
accessing
>> the image directly from outside) I can found many files filled with
"^@".
>>
>Also, what exactly do you mean by accessing the image directly from
outside? Was it from the brick directories directly? Was it from the mount
point of the volume? Could you elaborate? Which files exactly did you check?

-Krutika

>> If, instead, I configure KVM to access VM images via a FUSE mount,
>> everything seems to work correctly.
>>
>> Note that the problem with install is verified 100% time with QCOW2
>> image, while it appears only after with RAW disk images.
>>
>> Is there anyone who experienced the same problem ?
>>
>> Thank you,
>>
>>
>> --
>> Ing. Luca Lazzeroni
>> Responsabile Ricerca e Sviluppo
>> Trend Servizi Srl
>> Tel: 0376/631761
>> Web: https://www.trendservizi.it
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://lists.gluster.org/mailman/listinfo/gluster-users
>>
>
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.gluster.org/pipermail/gluster-users/attachments/20180116/c15f998d/attachment.html>

Ing. Luca Lazzeroni - Trend Servizi Srl

2018-Jan-16 15:31 UTC

head link

[Gluster-users] [Possibile SPAM] Re: Problem with Gluster 3.12.4, VM and sharding

I've just done all the steps to reproduce the problem.

Tha VM volume has been created via "qemu-img create -f qcow2 
Test-vda2.qcow2 20G" on the gluster volume mounted via FUSE. I've tried
also to create the volume with preallocated metadata, which moves the 
problem a bit far away (in time). The volume is a replice 3 arbiter 1 
volume hosted on XFS bricks.

Here are the informations:

[root at ovh-ov1 bricks]# gluster volume info gv2a2

Volume Name: gv2a2
Type: Replicate
Volume ID: 83c84774-2068-4bfc-b0b9-3e6b93705b9f
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: gluster1:/bricks/brick2/gv2a2
Brick2: gluster3:/bricks/brick3/gv2a2
Brick3: gluster2:/bricks/arbiter_brick_gv2a2/gv2a2 (arbiter)
Options Reconfigured:
storage.owner-gid: 107
storage.owner-uid: 107
user.cifs: off
features.shard: on
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
cluster.server-quorum-type: server
cluster.quorum-type: auto
cluster.eager-lock: enable
network.remote-dio: enable
performance.low-prio-threads: 32
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
transport.address-family: inet
nfs.disable: off
performance.client-io-threads: off

/var/log/glusterfs/glusterd.log:

[2018-01-15 14:17:50.196228] I [MSGID: 106488] 
[glusterd-handler.c:1548:__glusterd_handle_cli_get_volume] 0-management: 
Received get vol req
[2018-01-15 14:25:09.555214] I [MSGID: 106488] 
[glusterd-handler.c:1548:__glusterd_handle_cli_get_volume] 0-management: 
Received get vol req

(empty because today it's 2018-01-16)

/var/log/glusterfs/glustershd.log:

[2018-01-14 02:23:02.731245] I [glusterfsd-mgmt.c:1821:mgmt_getspec_cbk] 
0-glusterfs: No change in volfile,continuing

(empty too)

/var/log/glusterfs/bricks/brick-brick2-gv2a2.log (the interested volume):

[2018-01-16 15:14:37.809965] I [MSGID: 115029] 
[server-handshake.c:793:server_setvolume] 0-gv2a2-server: accepted 
client from ovh-ov1-10302-2018/01/16-15:14:37:790306-gv2a2-client-0-0-0 
(version: 3.12.4)
[2018-01-16 15:16:41.471751] E [MSGID: 113020] 
[posix.c:1485:posix_mknod] 0-gv2a2-posix: setting gfid on 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.4 failed
[2018-01-16 15:16:41.471745] W [MSGID: 113096] 
[posix-handle.c:770:posix_handle_hard] 0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.4 -> 
/bricks/brick2/gv2a2/.glusterfs/a0/14/a0144df3-8d89-4aed-872e-5fef141e9e1efailed
[File exists]
[2018-01-16 15:16:42.593392] W [MSGID: 113096] 
[posix-handle.c:770:posix_handle_hard] 0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.5 -> 
/bricks/brick2/gv2a2/.glusterfs/eb/04/eb044e6e-3a23-40a4-9ce1-f13af148eb67failed
[File exists]
[2018-01-16 15:16:42.593426] E [MSGID: 113020] 
[posix.c:1485:posix_mknod] 0-gv2a2-posix: setting gfid on 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.5 failed
[2018-01-16 15:17:04.129593] W [MSGID: 113096] 
[posix-handle.c:770:posix_handle_hard] 0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.8 -> 
/bricks/brick2/gv2a2/.glusterfs/dc/92/dc92bd0a-0d46-4826-a4c9-d073a924dd8dfailed
[File exists]
The message "W [MSGID: 113096] [posix-handle.c:770:posix_handle_hard] 
0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.8 -> 
/bricks/brick2/gv2a2/.glusterfs/dc/92/dc92bd0a-0d46-4826-a4c9-d073a924dd8dfailed
[File exists]" repeated 5 times between [2018-01-16 15:17:04.129593] and 
[2018-01-16 15:17:04.129593]
[2018-01-16 15:17:04.129661] E [MSGID: 113020] 
[posix.c:1485:posix_mknod] 0-gv2a2-posix: setting gfid on 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.8 failed
[2018-01-16 15:17:08.279162] W [MSGID: 113096] 
[posix-handle.c:770:posix_handle_hard] 0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.9 -> 
/bricks/brick2/gv2a2/.glusterfs/c9/b7/c9b71b00-a09f-4df1-b874-041820ca8241failed
[File exists]
[2018-01-16 15:17:08.279162] W [MSGID: 113096] 
[posix-handle.c:770:posix_handle_hard] 0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.9 -> 
/bricks/brick2/gv2a2/.glusterfs/c9/b7/c9b71b00-a09f-4df1-b874-041820ca8241failed
[File exists]
The message "W [MSGID: 113096] [posix-handle.c:770:posix_handle_hard] 
0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.9 -> 
/bricks/brick2/gv2a2/.glusterfs/c9/b7/c9b71b00-a09f-4df1-b874-041820ca8241failed
[File exists]" repeated 2 times between [2018-01-16 15:17:08.279162] and 
[2018-01-16 15:17:08.279162]

[2018-01-16 15:17:08.279177] E [MSGID: 113020] 
[posix.c:1485:posix_mknod] 0-gv2a2-posix: setting gfid on 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.9 failed
The message "W [MSGID: 113096] [posix-handle.c:770:posix_handle_hard] 
0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.4 -> 
/bricks/brick2/gv2a2/.glusterfs/a0/14/a0144df3-8d89-4aed-872e-5fef141e9e1efailed
[File exists]" repeated 6 times between [2018-01-16 15:16:41.471745] and 
[2018-01-16 15:16:41.471807]
The message "W [MSGID: 113096] [posix-handle.c:770:posix_handle_hard] 
0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.5 -> 
/bricks/brick2/gv2a2/.glusterfs/eb/04/eb044e6e-3a23-40a4-9ce1-f13af148eb67failed
[File exists]" repeated 2 times between [2018-01-16 15:16:42.593392] and 
[2018-01-16 15:16:42.593430]
[2018-01-16 15:17:32.229689] W [MSGID: 113096] 
[posix-handle.c:770:posix_handle_hard] 0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.14 -> 
/bricks/brick2/gv2a2/.glusterfs/53/04/530449fa-d698-4928-a262-9a0234232323failed
[File exists]
[2018-01-16 15:17:32.229720] E [MSGID: 113020] 
[posix.c:1485:posix_mknod] 0-gv2a2-posix: setting gfid on 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.14 failed
[2018-01-16 15:18:07.154330] W [MSGID: 113096] 
[posix-handle.c:770:posix_handle_hard] 0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.17 -> 
/bricks/brick2/gv2a2/.glusterfs/81/96/8196dd19-84bc-4c3d-909f-8792e9b4929dfailed
[File exists]
[2018-01-16 15:18:07.154375] E [MSGID: 113020] 
[posix.c:1485:posix_mknod] 0-gv2a2-posix: setting gfid on 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.17 failed
The message "W [MSGID: 113096] [posix-handle.c:770:posix_handle_hard] 
0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.14 -> 
/bricks/brick2/gv2a2/.glusterfs/53/04/530449fa-d698-4928-a262-9a0234232323failed
[File exists]" repeated 7 times between [2018-01-16 15:17:32.229689] and 
[2018-01-16 15:17:32.229806]
The message "W [MSGID: 113096] [posix-handle.c:770:posix_handle_hard] 
0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.17 -> 
/bricks/brick2/gv2a2/.glusterfs/81/96/8196dd19-84bc-4c3d-909f-8792e9b4929dfailed
[File exists]" repeated 3 times between [2018-01-16 15:18:07.154330] and 
[2018-01-16 15:18:07.154357]
[2018-01-16 15:19:23.618794] W [MSGID: 113096] 
[posix-handle.c:770:posix_handle_hard] 0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.21 -> 
/bricks/brick2/gv2a2/.glusterfs/6d/02/6d02bd98-83de-43e8-a7af-b1d5f5160403failed
[File exists]
[2018-01-16 15:19:23.618827] E [MSGID: 113020] 
[posix.c:1485:posix_mknod] 0-gv2a2-posix: setting gfid on 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.21 failed
The message "W [MSGID: 113096] [posix-handle.c:770:posix_handle_hard] 
0-gv2a2-posix: link 
/bricks/brick2/gv2a2/.shard/62335cb9-c7b5-4735-a879-59cff93fe622.21 -> 
/bricks/brick2/gv2a2/.glusterfs/6d/02/6d02bd98-83de-43e8-a7af-b1d5f5160403failed
[File exists]" repeated 3 times between [2018-01-16 15:19:23.618794] and 
[2018-01-16 15:19:23.618794]

Thank you,


Il 16/01/2018 11:40, Krutika Dhananjay ha scritto:> Also to help isolate the component, could you answer these:
>
> 1. on a different volume with shard not enabled, do you see this issue?
> 2. on a plain 3-way replicated volume (no arbiter), do you see this issue?
>
>
>
> On Tue, Jan 16, 2018 at 4:03 PM, Krutika Dhananjay 
> <kdhananj at redhat.com <mailto:kdhananj at redhat.com>> wrote:
>
>     Please share the volume-info output and the logs under
>     /var/log/glusterfs/ from all your nodes. for investigating the issue.
>
>     -Krutika
>
>     On Tue, Jan 16, 2018 at 1:30 PM, Ing. Luca Lazzeroni - Trend
>     Servizi Srl <luca at gvnet.it <mailto:luca at gvnet.it>>
wrote:
>
>         Hi to everyone.
>
>         I've got a strange problem with a gluster setup: 3 nodes with
>         Centos 7.4, Gluster 3.12.4 from Centos/Gluster repositories,
>         QEMU-KVM version 2.9.0 (compiled from RHEL sources).
>
>         I'm running volumes in replica 3 arbiter 1 mode (but I've
got
>         a volume in "pure" replica 3 mode too). I've applied
the
>         "virt" group settings to my volumes since they host VM
images.
>
>         If I try to install something (eg: Ubuntu Server 16.04.3) on a
>         VM (and so I generate a bit of I/O inside it) and configure
>         KVM to access gluster volume directly (via libvirt), install
>         fails after a while because the disk content is corrupted. If
>         I inspect the block inside the disk (by accessing the image
>         directly from outside) I can found many files filled with
"^@".
>
>
> Also, what exactly do you mean by accessing the image directly from 
> outside? Was it from the brick directories directly? Was it from the 
> mount point of the volume? Could you elaborate? Which files exactly 
> did you check?
>
> -Krutika
>
>
>         If, instead, I configure KVM to access VM images via a FUSE
>         mount, everything seems to work correctly.
>
>         Note that the problem with install is verified 100% time with
>         QCOW2 image, while it appears only after with RAW disk images.
>
>         Is there anyone who experienced the same problem ?
>
>         Thank you,
>
>
>         -- 
>         Ing. Luca Lazzeroni
>         Responsabile Ricerca e Sviluppo
>         Trend Servizi Srl
>         Tel: 0376/631761
>         Web: https://www.trendservizi.it
>
>         _______________________________________________
>         Gluster-users mailing list
>         Gluster-users at gluster.org <mailto:Gluster-users at
gluster.org>
>         http://lists.gluster.org/mailman/listinfo/gluster-users
>         <http://lists.gluster.org/mailman/listinfo/gluster-users>
>
>
>
-- 
Ing. Luca Lazzeroni
Responsabile Ricerca e Sviluppo
Trend Servizi Srl
Tel: 0376/631761
Web: https://www.trendservizi.it

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.gluster.org/pipermail/gluster-users/attachments/20180116/6c26eae9/attachment.html>

Apparently Analagous Threads

Search for more apparently analagous threads

Gluster users - Jan 2018 - [Possibile SPAM] Re: Problem with Gluster 3.12.4, VM and sharding

[Gluster-users] Problem with Gluster 3.12.4, VM and sharding

[Gluster-users] [Possibile SPAM] Re: Problem with Gluster 3.12.4, VM and sharding

Apparently Analagous Threads