Kaleb S. KEITHLEY
2017-Jul-06 17:31 UTC
[Gluster-users] Gluster install using Ganesha for NFS
After 3.10 you'd need to use storhaug.... Which.... doesn't work (yet). You need to use 3.10 for now. On 07/06/2017 12:53 PM, Anthony Valentine wrote:> I'm running this on CentOS 7.3 > > [root at glustertest1 ~]# cat /etc/redhat-release > CentOS Linux release 7.3.1611 (Core) > > > Here are the software versions I have installed. > > [root at glustertest1 ~]# rpm -qa | egrep -i "nfs|gluster|ganesha" > glusterfs-api-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-server-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-libs-3.11.0-0.1.rc0.el7.x86_64 > nfs-ganesha-gluster-2.4.5-1.el7.x86_64 > nfs-ganesha-utils-2.4.5-1.el7.x86_64 > centos-release-gluster310-1.0-1.el7.centos.noarch > nfs-utils-1.3.0-0.33.el7_3.x86_64 > glusterfs-3.11.0-0.1.rc0.el7.x86_64 > nfs-ganesha-2.4.5-1.el7.x86_64 > libnfsidmap-0.25-15.el7.x86_64 > glusterfs-client-xlators-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-cli-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-fuse-3.11.0-0.1.rc0.el7.x86_64 > > -----Original Message----- > From: Kaleb S. KEITHLEY [mailto:kkeithle at redhat.com] > Sent: Thursday, July 6, 2017 10:49 AM > To: Anthony Valentine <anthony.valentine at bldr.com> > Subject: Re: [Gluster-users] Gluster install using Ganesha for NFS > > On 07/06/2017 12:42 PM, Anthony Valentine wrote: >> Hello! >> >> I am attempting to setup a Gluster install using Ganesha for NFS using >> the guide found here >> http://blog.gluster.org/2015/10/linux-scale-out-nfsv4-using-nfs-ganesh >> a-and-glusterfs-one-step-at-a-time/ >> >> >> The Gluster portion is working fine, however when I try to setup >> Ganesha I have a problem. The guide says to run 'gluster nfs-ganesha enable' >> however when I do, I get the following error: >> >> [root at glustertest1 ~]# gluster nfs-ganesha enable >> >> unrecognized word: nfs-ganesha (position 0) >> >> Has this command changed? If so, what is the new command? If not, >> why would I be getting this error? >> >> Is there a more recent guide that I should be following? > > It could use some updating but it's mostly accurate. > > What version of gluster? That command should work. > > -- > > Kaleb > > > >
Anthony Valentine
2017-Jul-06 21:22 UTC
[Gluster-users] Gluster install using Ganesha for NFS
That was the problem, thank you! -----Original Message----- From: Kaleb S. KEITHLEY [mailto:kkeithle at redhat.com] Sent: Thursday, July 6, 2017 11:32 AM To: Anthony Valentine <anthony.valentine at bldr.com>; Gluster Users <gluster-users at gluster.org> Subject: Re: [Gluster-users] Gluster install using Ganesha for NFS After 3.10 you'd need to use storhaug.... Which.... doesn't work (yet). You need to use 3.10 for now. On 07/06/2017 12:53 PM, Anthony Valentine wrote:> I'm running this on CentOS 7.3 > > [root at glustertest1 ~]# cat /etc/redhat-release CentOS Linux release > 7.3.1611 (Core) > > > Here are the software versions I have installed. > > [root at glustertest1 ~]# rpm -qa | egrep -i "nfs|gluster|ganesha" > glusterfs-api-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-server-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-libs-3.11.0-0.1.rc0.el7.x86_64 > nfs-ganesha-gluster-2.4.5-1.el7.x86_64 > nfs-ganesha-utils-2.4.5-1.el7.x86_64 > centos-release-gluster310-1.0-1.el7.centos.noarch > nfs-utils-1.3.0-0.33.el7_3.x86_64 > glusterfs-3.11.0-0.1.rc0.el7.x86_64 > nfs-ganesha-2.4.5-1.el7.x86_64 > libnfsidmap-0.25-15.el7.x86_64 > glusterfs-client-xlators-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-cli-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-fuse-3.11.0-0.1.rc0.el7.x86_64 > > -----Original Message----- > From: Kaleb S. KEITHLEY [mailto:kkeithle at redhat.com] > Sent: Thursday, July 6, 2017 10:49 AM > To: Anthony Valentine <anthony.valentine at bldr.com> > Subject: Re: [Gluster-users] Gluster install using Ganesha for NFS > > On 07/06/2017 12:42 PM, Anthony Valentine wrote: >> Hello! >> >> I am attempting to setup a Gluster install using Ganesha for NFS >> using the guide found here >> http://blog.gluster.org/2015/10/linux-scale-out-nfsv4-using-nfs-ganes >> h >> a-and-glusterfs-one-step-at-a-time/ >> >> >> The Gluster portion is working fine, however when I try to setup >> Ganesha I have a problem. The guide says to run 'gluster nfs-ganesha enable' >> however when I do, I get the following error: >> >> [root at glustertest1 ~]# gluster nfs-ganesha enable >> >> unrecognized word: nfs-ganesha (position 0) >> >> Has this command changed? If so, what is the new command? If not, >> why would I be getting this error? >> >> Is there a more recent guide that I should be following? > > It could use some updating but it's mostly accurate. > > What version of gluster? That command should work. > > -- > > Kaleb > > > >
Hi, Why change to storhaug ? and whats going to happen to the current setup if i want to update Gluster to 3.11 or beyond ? -- Respectfully Mahdi A. Mahdi ________________________________ From: gluster-users-bounces at gluster.org <gluster-users-bounces at gluster.org> on behalf of Kaleb S. KEITHLEY <kkeithle at redhat.com> Sent: Thursday, July 6, 2017 8:31:34 PM To: Anthony Valentine; Gluster Users Subject: Re: [Gluster-users] Gluster install using Ganesha for NFS After 3.10 you'd need to use storhaug.... Which.... doesn't work (yet). You need to use 3.10 for now. On 07/06/2017 12:53 PM, Anthony Valentine wrote:> I'm running this on CentOS 7.3 > > [root at glustertest1 ~]# cat /etc/redhat-release > CentOS Linux release 7.3.1611 (Core) > > > Here are the software versions I have installed. > > [root at glustertest1 ~]# rpm -qa | egrep -i "nfs|gluster|ganesha" > glusterfs-api-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-server-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-libs-3.11.0-0.1.rc0.el7.x86_64 > nfs-ganesha-gluster-2.4.5-1.el7.x86_64 > nfs-ganesha-utils-2.4.5-1.el7.x86_64 > centos-release-gluster310-1.0-1.el7.centos.noarch > nfs-utils-1.3.0-0.33.el7_3.x86_64 > glusterfs-3.11.0-0.1.rc0.el7.x86_64 > nfs-ganesha-2.4.5-1.el7.x86_64 > libnfsidmap-0.25-15.el7.x86_64 > glusterfs-client-xlators-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-cli-3.11.0-0.1.rc0.el7.x86_64 > glusterfs-fuse-3.11.0-0.1.rc0.el7.x86_64 > > -----Original Message----- > From: Kaleb S. KEITHLEY [mailto:kkeithle at redhat.com] > Sent: Thursday, July 6, 2017 10:49 AM > To: Anthony Valentine <anthony.valentine at bldr.com> > Subject: Re: [Gluster-users] Gluster install using Ganesha for NFS > > On 07/06/2017 12:42 PM, Anthony Valentine wrote: >> Hello! >> >> I am attempting to setup a Gluster install using Ganesha for NFS using >> the guide found here >> http://blog.gluster.org/2015/10/linux-scale-out-nfsv4-using-nfs-ganesh >> a-and-glusterfs-one-step-at-a-time/ >> >> >> The Gluster portion is working fine, however when I try to setup >> Ganesha I have a problem. The guide says to run 'gluster nfs-ganesha enable' >> however when I do, I get the following error: >> >> [root at glustertest1 ~]# gluster nfs-ganesha enable >> >> unrecognized word: nfs-ganesha (position 0) >> >> Has this command changed? If so, what is the new command? If not, >> why would I be getting this error? >> >> Is there a more recent guide that I should be following? > > It could use some updating but it's mostly accurate. > > What version of gluster? That command should work. > > -- > > Kaleb > > > >_______________________________________________ Gluster-users mailing list Gluster-users at gluster.org http://lists.gluster.org/mailman/listinfo/gluster-users -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20170707/4d22aa23/attachment.html>