Hi Joseph,
I think there is gap in understanding your problem. Let me try to give
more clear picture on this,
First , couple of clarification points here
1) client graph is an internally generated configuration file based on
your volume, that said you don't need to create or edit your own. If you
want a 3-way replicated volume you have to mention that when you create
the volume.
2) When you mount a gluster volume, you don't need to provide any client
graph, you just need to give server hostname and volname, it will
automatically fetches the graph and start working on it (so it does the
replication based on the graph generated by gluster management daemon)
Now let me briefly describe the procedure for creating a 3-way
replicated volume
1) gluster volume create <volname> replica 3
<hostname>:/<brick_path1>
<hostname>:/<brick_path2> <hostname>:/<brick_path3>
Note : if you give 3 more bricks , then it will create 2-way
distributed 3 way replicated volume (you can increase the distribution
by adding multiple if 3)
this step will automatically create the configuration file in
/var/lib/glusterd/vols/<volname>/trusted-<volname>.tcp-fuse.vol
2) Now start the volume using gluster volume start <volname>
3) Fuse mount the volume in client machine using the command mount -t
glusterfs <server_hostname>:/<volname> /<mnt>
this will automatically fetches the configuration file and will do
the replication. You don't need to do anything
Let me know if this helps.
Regards
Rafi KC
On 02/24/2017 05:13 PM, Joseph Lorenzini wrote:> HI Mohammed,
>
> Its not a bug per se, its a configuration and documentation issue. I
> searched the gluster documentation pretty thoroughly and I did not
> find anything that discussed the 1) client's call graph and 2) how to
> specifically configure a native glusterfs client to properly specify
> that call graph so that replication will happen across multiple
> bricks. If its there, then there's a pretty severe organization issue
> in the documentation (I am pretty sure I ended up reading almost every
> page actually).
>
> As a result, because I was a new to gluster, my initial set up really
> confused me. I would follow the instructions as documented in official
> gluster docs (execute the mount command), write data on the
> mount...and then only see it replicated to a single brick. It was only
> after much furious googling did I manage to figure out that that 1) i
> needed a client configuration file which should be specified in
> /etc/fstab and 2) that configuration block mentioned above was the key.
>
> I am actually planning on submitting a PR to the documentation to
> cover all this. To be clear, I am sure this is obvious to a seasoned
> gluster user -- but it is not at all obvious to someone who is new to
> gluster such as myself.
>
> So I am an operations engineer. I like reproducible deployments and I
> like monitoring to alert me when something is wrong. Due to human
> error or a bug in our deployment code, its possible that something
> like not setting the client call graph properly could happen. I wanted
> a way to detect this problem so that if it does happen, it can be
> remediated immediately.
>
> Your suggestion sounds promising. I shall definitely look into that.
> Though that might be a useful information to surface up in a CLI
> command in a future gluster release IMHO.
>
> Joe
>
>
>
> On Thu, Feb 23, 2017 at 11:51 PM, Mohammed Rafi K C
> <rkavunga at redhat.com <mailto:rkavunga at redhat.com>> wrote:
>
>
>
> On 02/23/2017 11:12 PM, Joseph Lorenzini wrote:
>> Hi all,
>>
>> I have a simple replicated volume with a replica count of 3. To
>> ensure any file changes (create/delete/modify) are replicated to
>> all bricks, I have this setting in my client configuration.
>>
>> volume gv0-replicate-0
>> type cluster/replicate
>> subvolumes gv0-client-0 gv0-client-1 gv0-client-2
>> end-volume
>>
>> And that works as expected. My question is how one could detect
>> if this was not happening which could poise a severe problem with
>> data consistency and replication. For example, those settings
>> could be omitted from the client config and then the client will
>> only write data to one brick and all kinds of terrible things
>> will start happening. I have not found a way the gluster volume
>> cli to detect when that kind of problem is occurring. For example
>> gluster volume heal <volname> info does not detect this
problem.
>>
>> Is there any programmatic way to detect when this problem is
>> occurring?
>>
>
> I couldn't understand how you will end up in this situation. There
> is only one possibility (assuming there is no bug :) ), ie you
> changed the client graph in a way that there is only one subvolume
> to replica server.
>
> To check that the simply way is, there is a xlator called meta,
> which provides meta data information through mount point, similiar
> to linux proc file system. So you can check the active graph
> through meta and see the number of subvolumes for replica xlator
>
> for example : the directory <mount
> point>/.meta/graphs/active/<volname>-replicate-0/subvolumes
will
> have entries for each replica clients , so in your case you should
> see 3 directories.
>
>
> Let me know if this helps.
>
> Regards
> Rafi KC
>
>
>> Thanks,
>> Joe
>>
>>
>>
>>
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org <mailto:Gluster-users at
gluster.org>
>> http://lists.gluster.org/mailman/listinfo/gluster-users
>> <http://lists.gluster.org/mailman/listinfo/gluster-users>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.gluster.org/pipermail/gluster-users/attachments/20170224/5373edc3/attachment.html>