Tried this. With me, only 'fake2' gets healed after i bring the 'empty' brick back up and it stops there unless I do a 'heal-full'. Is that what you're seeing as well? -Krutika On Wed, Aug 31, 2016 at 4:43 AM, David Gossage <dgossage at carouselchecks.com> wrote:> Same issue brought up glusterd on problem node heal count still stuck at > 6330. > > Ran gluster v heal GUSTER1 full > > glustershd on problem node shows a sweep starting and finishing in > seconds. Other 2 nodes show no activity in log. They should start a sweep > too shouldn't they? > > Tried starting from scratch > > kill -15 brickpid > rm -Rf /brick > mkdir -p /brick > mkdir mkdir /gsmount/fake2 > setfattr -n "user.some-name" -v "some-value" /gsmount/fake2 > > Heals visible dirs instantly then stops. > > gluster v heal GLUSTER1 full > > see sweep star on problem node and end almost instantly. no files added t > heal list no files healed no more logging > > [2016-08-30 23:11:31.544331] I [MSGID: 108026] > [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: > starting full sweep on subvol GLUSTER1-client-1 > [2016-08-30 23:11:33.776235] I [MSGID: 108026] > [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: > finished full sweep on subvol GLUSTER1-client-1 > > same results no matter which node you run command on. Still stuck with > 6330 files showing needing healed out of 19k. still showing in logs no > heals are occuring. > > Is their a way to forcibly reset any prior heal data? Could it be stuck > on some past failed heal start? > > > > > *David Gossage* > *Carousel Checks Inc. | System Administrator* > *Office* 708.613.2284 > > On Tue, Aug 30, 2016 at 10:03 AM, David Gossage < > dgossage at carouselchecks.com> wrote: > >> On Tue, Aug 30, 2016 at 10:02 AM, David Gossage < >> dgossage at carouselchecks.com> wrote: >> >>> updated test server to 3.8.3 >>> >>> Brick1: 192.168.71.10:/gluster2/brick1/1 >>> Brick2: 192.168.71.11:/gluster2/brick2/1 >>> Brick3: 192.168.71.12:/gluster2/brick3/1 >>> Options Reconfigured: >>> cluster.granular-entry-heal: on >>> performance.readdir-ahead: on >>> performance.read-ahead: off >>> nfs.disable: on >>> nfs.addr-namelookup: off >>> nfs.enable-ino32: off >>> cluster.background-self-heal-count: 16 >>> cluster.self-heal-window-size: 1024 >>> performance.quick-read: off >>> performance.io-cache: off >>> performance.stat-prefetch: off >>> cluster.eager-lock: enable >>> network.remote-dio: on >>> cluster.quorum-type: auto >>> cluster.server-quorum-type: server >>> storage.owner-gid: 36 >>> storage.owner-uid: 36 >>> server.allow-insecure: on >>> features.shard: on >>> features.shard-block-size: 64MB >>> performance.strict-o-direct: off >>> cluster.locking-scheme: granular >>> >>> kill -15 brickpid >>> rm -Rf /gluster2/brick3 >>> mkdir -p /gluster2/brick3/1 >>> mkdir mkdir /rhev/data-center/mnt/glusterSD/192.168.71.10\:_glustershard >>> /fake2 >>> setfattr -n "user.some-name" -v "some-value" >>> /rhev/data-center/mnt/glusterSD/192.168.71.10\:_glustershard/fake2 >>> gluster v start glustershard force >>> >>> at this point brick process starts and all visible files including new >>> dir are made on brick >>> handful of shards are in heal statistics still but no .shard directory >>> created and no increase in shard count >>> >>> gluster v heal glustershard >>> >>> At this point still no increase in count or dir made no additional >>> activity in logs for healing generated. waited few minutes tailing logs to >>> check if anything kicked in. >>> >>> gluster v heal glustershard full >>> >>> gluster shards added to list and heal commences. logs show full sweep >>> starting on all 3 nodes. though this time it only shows as finishing on >>> one which looks to be the one that had brick deleted. >>> >>> [2016-08-30 14:45:33.098589] I [MSGID: 108026] >>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>> starting full sweep on subvol glustershard-client-0 >>> [2016-08-30 14:45:33.099492] I [MSGID: 108026] >>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>> starting full sweep on subvol glustershard-client-1 >>> [2016-08-30 14:45:33.100093] I [MSGID: 108026] >>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>> starting full sweep on subvol glustershard-client-2 >>> [2016-08-30 14:52:29.760213] I [MSGID: 108026] >>> [afr-self-heald.c:656:afr_shd_full_healer] 0-glustershard-replicate-0: >>> finished full sweep on subvol glustershard-client-2 >>> >> >> Just realized its still healing so that may be why sweep on 2 other >> bricks haven't replied as finished. >> >>> >>> >>> my hope is that later tonight a full heal will work on production. Is >>> it possible self-heal daemon can get stale or stop listening but still show >>> as active? Would stopping and starting self-heal daemon from gluster cli >>> before doing these heals be helpful? >>> >>> >>> On Tue, Aug 30, 2016 at 9:29 AM, David Gossage < >>> dgossage at carouselchecks.com> wrote: >>> >>>> On Tue, Aug 30, 2016 at 8:52 AM, David Gossage < >>>> dgossage at carouselchecks.com> wrote: >>>> >>>>> On Tue, Aug 30, 2016 at 8:01 AM, Krutika Dhananjay < >>>>> kdhananj at redhat.com> wrote: >>>>> >>>>>> >>>>>> >>>>>> On Tue, Aug 30, 2016 at 6:20 PM, Krutika Dhananjay < >>>>>> kdhananj at redhat.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Tue, Aug 30, 2016 at 6:07 PM, David Gossage < >>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>> >>>>>>>> On Tue, Aug 30, 2016 at 7:18 AM, Krutika Dhananjay < >>>>>>>> kdhananj at redhat.com> wrote: >>>>>>>> >>>>>>>>> Could you also share the glustershd logs? >>>>>>>>> >>>>>>>> >>>>>>>> I'll get them when I get to work sure >>>>>>>> >>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> I tried the same steps that you mentioned multiple times, but heal >>>>>>>>> is running to completion without any issues. >>>>>>>>> >>>>>>>>> It must be said that 'heal full' traverses the files and >>>>>>>>> directories in a depth-first order and does heals also in the same order. >>>>>>>>> But if it gets interrupted in the middle (say because self-heal-daemon was >>>>>>>>> either intentionally or unintentionally brought offline and then brought >>>>>>>>> back up), self-heal will only pick up the entries that are so far marked as >>>>>>>>> new-entries that need heal which it will find in indices/xattrop directory. >>>>>>>>> What this means is that those files and directories that were not visited >>>>>>>>> during the crawl, will remain untouched and unhealed in this second >>>>>>>>> iteration of heal, unless you execute a 'heal-full' again. >>>>>>>>> >>>>>>>> >>>>>>>> So should it start healing shards as it crawls or not until after >>>>>>>> it crawls the entire .shard directory? At the pace it was going that could >>>>>>>> be a week with one node appearing in the cluster but with no shard files if >>>>>>>> anything tries to access a file on that node. From my experience other day >>>>>>>> telling it to heal full again did nothing regardless of node used. >>>>>>>> >>>>>>> >>>>>> Crawl is started from '/' of the volume. Whenever self-heal detects >>>>>> during the crawl that a file or directory is present in some brick(s) and >>>>>> absent in others, it creates the file on the bricks where it is absent and >>>>>> marks the fact that the file or directory might need data/entry and >>>>>> metadata heal too (this also means that an index is created under >>>>>> .glusterfs/indices/xattrop of the src bricks). And the data/entry and >>>>>> metadata heal are picked up and done in >>>>>> >>>>> the background with the help of these indices. >>>>>> >>>>> >>>>> Looking at my 3rd node as example i find nearly an exact same number >>>>> of files in xattrop dir as reported by heal count at time I brought down >>>>> node2 to try and alleviate read io errors that seemed to occur from what I >>>>> was guessing as attempts to use the node with no shards for reads. >>>>> >>>>> Also attached are the glustershd logs from the 3 nodes, along with the >>>>> test node i tried yesterday with same results. >>>>> >>>> >>>> Looking at my own logs I notice that a full sweep was only ever >>>> recorded in glustershd.log on 2nd node with missing directory. I believe I >>>> should have found a sweep begun on every node correct? >>>> >>>> On my test dev when it did work I do see that >>>> >>>> [2016-08-30 13:56:25.223333] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-0 >>>> [2016-08-30 13:56:25.223522] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-1 >>>> [2016-08-30 13:56:25.224616] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-2 >>>> [2016-08-30 14:18:48.333740] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> finished full sweep on subvol glustershard-client-2 >>>> [2016-08-30 14:18:48.356008] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> finished full sweep on subvol glustershard-client-1 >>>> [2016-08-30 14:18:49.637811] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> finished full sweep on subvol glustershard-client-0 >>>> >>>> While when looking at past few days of the 3 prod nodes i only found >>>> that on my 2nd node >>>> [2016-08-27 01:26:42.638772] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>> starting full sweep on subvol GLUSTER1-client-1 >>>> [2016-08-27 11:37:01.732366] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>> finished full sweep on subvol GLUSTER1-client-1 >>>> [2016-08-27 12:58:34.597228] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>> starting full sweep on subvol GLUSTER1-client-1 >>>> [2016-08-27 12:59:28.041173] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>> finished full sweep on subvol GLUSTER1-client-1 >>>> [2016-08-27 20:03:42.560188] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>> starting full sweep on subvol GLUSTER1-client-1 >>>> [2016-08-27 20:03:44.278274] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>> finished full sweep on subvol GLUSTER1-client-1 >>>> [2016-08-27 21:00:42.603315] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>> starting full sweep on subvol GLUSTER1-client-1 >>>> [2016-08-27 21:00:46.148674] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>> finished full sweep on subvol GLUSTER1-client-1 >>>> >>>> >>>> >>>> >>>> >>>>> >>>>>> >>>>>>>> >>>>>>>>> My suspicion is that this is what happened on your setup. Could >>>>>>>>> you confirm if that was the case? >>>>>>>>> >>>>>>>> >>>>>>>> Brick was brought online with force start then a full heal >>>>>>>> launched. Hours later after it became evident that it was not adding new >>>>>>>> files to heal I did try restarting self-heal daemon and relaunching full >>>>>>>> heal again. But this was after the heal had basically already failed to >>>>>>>> work as intended. >>>>>>>> >>>>>>> >>>>>>> OK. How did you figure it was not adding any new files? I need to >>>>>>> know what places you were monitoring to come to this conclusion. >>>>>>> >>>>>>> -Krutika >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> As for those logs, I did manager to do something that caused these >>>>>>>>> warning messages you shared earlier to appear in my client and server logs. >>>>>>>>> Although these logs are annoying and a bit scary too, they didn't >>>>>>>>> do any harm to the data in my volume. Why they appear just after a brick is >>>>>>>>> replaced and under no other circumstances is something I'm still >>>>>>>>> investigating. >>>>>>>>> >>>>>>>>> But for future, it would be good to follow the steps Anuradha gave >>>>>>>>> as that would allow self-heal to at least detect that it has some repairing >>>>>>>>> to do whenever it is restarted whether intentionally or otherwise. >>>>>>>>> >>>>>>>> >>>>>>>> I followed those steps as described on my test box and ended up >>>>>>>> with exact same outcome of adding shards at an agonizing slow pace and no >>>>>>>> creation of .shard directory or heals on shard directory. Directories >>>>>>>> visible from mount healed quickly. This was with one VM so it has only 800 >>>>>>>> shards as well. After hours at work it had added a total of 33 shards to >>>>>>>> be healed. I sent those logs yesterday as well though not the glustershd. >>>>>>>> >>>>>>>> Does replace-brick command copy files in same manner? For these >>>>>>>> purposes I am contemplating just skipping the heal route. >>>>>>>> >>>>>>>> >>>>>>>>> -Krutika >>>>>>>>> >>>>>>>>> On Tue, Aug 30, 2016 at 2:22 AM, David Gossage < >>>>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>>>> >>>>>>>>>> attached brick and client logs from test machine where same >>>>>>>>>> behavior occurred not sure if anything new is there. its still on 3.8.2 >>>>>>>>>> >>>>>>>>>> Number of Bricks: 1 x 3 = 3 >>>>>>>>>> Transport-type: tcp >>>>>>>>>> Bricks: >>>>>>>>>> Brick1: 192.168.71.10:/gluster2/brick1/1 >>>>>>>>>> Brick2: 192.168.71.11:/gluster2/brick2/1 >>>>>>>>>> Brick3: 192.168.71.12:/gluster2/brick3/1 >>>>>>>>>> Options Reconfigured: >>>>>>>>>> cluster.locking-scheme: granular >>>>>>>>>> performance.strict-o-direct: off >>>>>>>>>> features.shard-block-size: 64MB >>>>>>>>>> features.shard: on >>>>>>>>>> server.allow-insecure: on >>>>>>>>>> storage.owner-uid: 36 >>>>>>>>>> storage.owner-gid: 36 >>>>>>>>>> cluster.server-quorum-type: server >>>>>>>>>> cluster.quorum-type: auto >>>>>>>>>> network.remote-dio: on >>>>>>>>>> cluster.eager-lock: enable >>>>>>>>>> performance.stat-prefetch: off >>>>>>>>>> performance.io-cache: off >>>>>>>>>> performance.quick-read: off >>>>>>>>>> cluster.self-heal-window-size: 1024 >>>>>>>>>> cluster.background-self-heal-count: 16 >>>>>>>>>> nfs.enable-ino32: off >>>>>>>>>> nfs.addr-namelookup: off >>>>>>>>>> nfs.disable: on >>>>>>>>>> performance.read-ahead: off >>>>>>>>>> performance.readdir-ahead: on >>>>>>>>>> cluster.granular-entry-heal: on >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Aug 29, 2016 at 2:20 PM, David Gossage < >>>>>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>>>>> >>>>>>>>>>> On Mon, Aug 29, 2016 at 7:01 AM, Anuradha Talur < >>>>>>>>>>> atalur at redhat.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ----- Original Message ----- >>>>>>>>>>>> > From: "David Gossage" <dgossage at carouselchecks.com> >>>>>>>>>>>> > To: "Anuradha Talur" <atalur at redhat.com> >>>>>>>>>>>> > Cc: "gluster-users at gluster.org List" < >>>>>>>>>>>> Gluster-users at gluster.org>, "Krutika Dhananjay" < >>>>>>>>>>>> kdhananj at redhat.com> >>>>>>>>>>>> > Sent: Monday, August 29, 2016 5:12:42 PM >>>>>>>>>>>> > Subject: Re: [Gluster-users] 3.8.3 Shards Healing Glacier Slow >>>>>>>>>>>> > >>>>>>>>>>>> > On Mon, Aug 29, 2016 at 5:39 AM, Anuradha Talur < >>>>>>>>>>>> atalur at redhat.com> wrote: >>>>>>>>>>>> > >>>>>>>>>>>> > > Response inline. >>>>>>>>>>>> > > >>>>>>>>>>>> > > ----- Original Message ----- >>>>>>>>>>>> > > > From: "Krutika Dhananjay" <kdhananj at redhat.com> >>>>>>>>>>>> > > > To: "David Gossage" <dgossage at carouselchecks.com> >>>>>>>>>>>> > > > Cc: "gluster-users at gluster.org List" < >>>>>>>>>>>> Gluster-users at gluster.org> >>>>>>>>>>>> > > > Sent: Monday, August 29, 2016 3:55:04 PM >>>>>>>>>>>> > > > Subject: Re: [Gluster-users] 3.8.3 Shards Healing Glacier >>>>>>>>>>>> Slow >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > Could you attach both client and brick logs? Meanwhile I >>>>>>>>>>>> will try these >>>>>>>>>>>> > > steps >>>>>>>>>>>> > > > out on my machines and see if it is easily recreatable. >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > -Krutika >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > On Mon, Aug 29, 2016 at 2:31 PM, David Gossage < >>>>>>>>>>>> > > dgossage at carouselchecks.com >>>>>>>>>>>> > > > > wrote: >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > Centos 7 Gluster 3.8.3 >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > Brick1: ccgl1.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>> > > > Brick2: ccgl2.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>> > > > Brick3: ccgl4.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>> > > > Options Reconfigured: >>>>>>>>>>>> > > > cluster.data-self-heal-algorithm: full >>>>>>>>>>>> > > > cluster.self-heal-daemon: on >>>>>>>>>>>> > > > cluster.locking-scheme: granular >>>>>>>>>>>> > > > features.shard-block-size: 64MB >>>>>>>>>>>> > > > features.shard: on >>>>>>>>>>>> > > > performance.readdir-ahead: on >>>>>>>>>>>> > > > storage.owner-uid: 36 >>>>>>>>>>>> > > > storage.owner-gid: 36 >>>>>>>>>>>> > > > performance.quick-read: off >>>>>>>>>>>> > > > performance.read-ahead: off >>>>>>>>>>>> > > > performance.io-cache: off >>>>>>>>>>>> > > > performance.stat-prefetch: on >>>>>>>>>>>> > > > cluster.eager-lock: enable >>>>>>>>>>>> > > > network.remote-dio: enable >>>>>>>>>>>> > > > cluster.quorum-type: auto >>>>>>>>>>>> > > > cluster.server-quorum-type: server >>>>>>>>>>>> > > > server.allow-insecure: on >>>>>>>>>>>> > > > cluster.self-heal-window-size: 1024 >>>>>>>>>>>> > > > cluster.background-self-heal-count: 16 >>>>>>>>>>>> > > > performance.strict-write-ordering: off >>>>>>>>>>>> > > > nfs.disable: on >>>>>>>>>>>> > > > nfs.addr-namelookup: off >>>>>>>>>>>> > > > nfs.enable-ino32: off >>>>>>>>>>>> > > > cluster.granular-entry-heal: on >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > Friday did rolling upgrade from 3.8.3->3.8.3 no issues. >>>>>>>>>>>> > > > Following steps detailed in previous recommendations >>>>>>>>>>>> began proces of >>>>>>>>>>>> > > > replacing and healngbricks one node at a time. >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > 1) kill pid of brick >>>>>>>>>>>> > > > 2) reconfigure brick from raid6 to raid10 >>>>>>>>>>>> > > > 3) recreate directory of brick >>>>>>>>>>>> > > > 4) gluster volume start <> force >>>>>>>>>>>> > > > 5) gluster volume heal <> full >>>>>>>>>>>> > > Hi, >>>>>>>>>>>> > > >>>>>>>>>>>> > > I'd suggest that full heal is not used. There are a few >>>>>>>>>>>> bugs in full heal. >>>>>>>>>>>> > > Better safe than sorry ;) >>>>>>>>>>>> > > Instead I'd suggest the following steps: >>>>>>>>>>>> > > >>>>>>>>>>>> > > Currently I brought the node down by systemctl stop >>>>>>>>>>>> glusterd as I was >>>>>>>>>>>> > getting sporadic io issues and a few VM's paused so hoping >>>>>>>>>>>> that will help. >>>>>>>>>>>> > I may wait to do this till around 4PM when most work is done >>>>>>>>>>>> in case it >>>>>>>>>>>> > shoots load up. >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> > > 1) kill pid of brick >>>>>>>>>>>> > > 2) to configuring of brick that you need >>>>>>>>>>>> > > 3) recreate brick dir >>>>>>>>>>>> > > 4) while the brick is still down, from the mount point: >>>>>>>>>>>> > > a) create a dummy non existent dir under / of mount. >>>>>>>>>>>> > > >>>>>>>>>>>> > >>>>>>>>>>>> > so if noee 2 is down brick, pick node for example 3 and make >>>>>>>>>>>> a test dir >>>>>>>>>>>> > under its brick directory that doesnt exist on 2 or should I >>>>>>>>>>>> be dong this >>>>>>>>>>>> > over a gluster mount? >>>>>>>>>>>> You should be doing this over gluster mount. >>>>>>>>>>>> > >>>>>>>>>>>> > > b) set a non existent extended attribute on / of mount. >>>>>>>>>>>> > > >>>>>>>>>>>> > >>>>>>>>>>>> > Could you give me an example of an attribute to set? I've >>>>>>>>>>>> read a tad on >>>>>>>>>>>> > this, and looked up attributes but haven't set any yet myself. >>>>>>>>>>>> > >>>>>>>>>>>> Sure. setfattr -n "user.some-name" -v "some-value" >>>>>>>>>>>> <path-to-mount> >>>>>>>>>>>> > Doing these steps will ensure that heal happens only from >>>>>>>>>>>> updated brick to >>>>>>>>>>>> > > down brick. >>>>>>>>>>>> > > 5) gluster v start <> force >>>>>>>>>>>> > > 6) gluster v heal <> >>>>>>>>>>>> > > >>>>>>>>>>>> > >>>>>>>>>>>> > Will it matter if somewhere in gluster the full heal command >>>>>>>>>>>> was run other >>>>>>>>>>>> > day? Not sure if it eventually stops or times out. >>>>>>>>>>>> > >>>>>>>>>>>> full heal will stop once the crawl is done. So if you want to >>>>>>>>>>>> trigger heal again, >>>>>>>>>>>> run gluster v heal <>. Actually even brick up or volume start >>>>>>>>>>>> force should >>>>>>>>>>>> trigger the heal. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Did this on test bed today. its one server with 3 bricks on >>>>>>>>>>> same machine so take that for what its worth. also it still runs 3.8.2. >>>>>>>>>>> Maybe ill update and re-run test. >>>>>>>>>>> >>>>>>>>>>> killed brick >>>>>>>>>>> deleted brick dir >>>>>>>>>>> recreated brick dir >>>>>>>>>>> created fake dir on gluster mount >>>>>>>>>>> set suggested fake attribute on it >>>>>>>>>>> ran volume start <> force >>>>>>>>>>> >>>>>>>>>>> looked at files it said needed healing and it was just 8 shards >>>>>>>>>>> that were modified for few minutes I ran through steps >>>>>>>>>>> >>>>>>>>>>> gave it few minutes and it stayed same >>>>>>>>>>> ran gluster volume <> heal >>>>>>>>>>> >>>>>>>>>>> it healed all the directories and files you can see over mount >>>>>>>>>>> including fakedir. >>>>>>>>>>> >>>>>>>>>>> same issue for shards though. it adds more shards to heal at >>>>>>>>>>> glacier pace. slight jump in speed if I stat every file and dir in VM >>>>>>>>>>> running but not all shards. >>>>>>>>>>> >>>>>>>>>>> It started with 8 shards to heal and is now only at 33 out of >>>>>>>>>>> 800 and probably wont finish adding for few days at rate it goes. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> > > >>>>>>>>>>>> > > > 1st node worked as expected took 12 hours to heal 1TB >>>>>>>>>>>> data. Load was >>>>>>>>>>>> > > little >>>>>>>>>>>> > > > heavy but nothing shocking. >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > About an hour after node 1 finished I began same process >>>>>>>>>>>> on node2. Heal >>>>>>>>>>>> > > > proces kicked in as before and the files in directories >>>>>>>>>>>> visible from >>>>>>>>>>>> > > mount >>>>>>>>>>>> > > > and .glusterfs healed in short time. Then it began crawl >>>>>>>>>>>> of .shard adding >>>>>>>>>>>> > > > those files to heal count at which point the entire >>>>>>>>>>>> proces ground to a >>>>>>>>>>>> > > halt >>>>>>>>>>>> > > > basically. After 48 hours out of 19k shards it has added >>>>>>>>>>>> 5900 to heal >>>>>>>>>>>> > > list. >>>>>>>>>>>> > > > Load on all 3 machnes is negligible. It was suggested to >>>>>>>>>>>> change this >>>>>>>>>>>> > > value >>>>>>>>>>>> > > > to full cluster.data-self-heal-algorithm and restart >>>>>>>>>>>> volume which I >>>>>>>>>>>> > > did. No >>>>>>>>>>>> > > > efffect. Tried relaunching heal no effect, despite any >>>>>>>>>>>> node picked. I >>>>>>>>>>>> > > > started each VM and performed a stat of all files from >>>>>>>>>>>> within it, or a >>>>>>>>>>>> > > full >>>>>>>>>>>> > > > virus scan and that seemed to cause short small spikes in >>>>>>>>>>>> shards added, >>>>>>>>>>>> > > but >>>>>>>>>>>> > > > not by much. Logs are showing no real messages indicating >>>>>>>>>>>> anything is >>>>>>>>>>>> > > going >>>>>>>>>>>> > > > on. I get hits to brick log on occasion of null lookups >>>>>>>>>>>> making me think >>>>>>>>>>>> > > its >>>>>>>>>>>> > > > not really crawling shards directory but waiting for a >>>>>>>>>>>> shard lookup to >>>>>>>>>>>> > > add >>>>>>>>>>>> > > > it. I'll get following in brick log but not constant and >>>>>>>>>>>> sometime >>>>>>>>>>>> > > multiple >>>>>>>>>>>> > > > for same shard. >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > [2016-08-29 08:31:57.478125] W [MSGID: 115009] >>>>>>>>>>>> > > > [server-resolve.c:569:server_resolve] 0-GLUSTER1-server: >>>>>>>>>>>> no resolution >>>>>>>>>>>> > > type >>>>>>>>>>>> > > > for (null) (LOOKUP) >>>>>>>>>>>> > > > [2016-08-29 08:31:57.478170] E [MSGID: 115050] >>>>>>>>>>>> > > > [server-rpc-fops.c:156:server_lookup_cbk] >>>>>>>>>>>> 0-GLUSTER1-server: 12591783: >>>>>>>>>>>> > > > LOOKUP (null) (00000000-0000-0000-00 >>>>>>>>>>>> > > > 00-000000000000/241a55ed-f0d5-4dbc-a6ce-ab784a0ba6ff.221) >>>>>>>>>>>> ==> (Invalid >>>>>>>>>>>> > > > argument) [Invalid argument] >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > This one repeated about 30 times in row then nothing for >>>>>>>>>>>> 10 minutes then >>>>>>>>>>>> > > one >>>>>>>>>>>> > > > hit for one different shard by itself. >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > How can I determine if Heal is actually running? How can >>>>>>>>>>>> I kill it or >>>>>>>>>>>> > > force >>>>>>>>>>>> > > > restart? Does node I start it from determine which >>>>>>>>>>>> directory gets >>>>>>>>>>>> > > crawled to >>>>>>>>>>>> > > > determine heals? >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > David Gossage >>>>>>>>>>>> > > > Carousel Checks Inc. | System Administrator >>>>>>>>>>>> > > > Office 708.613.2284 >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > _______________________________________________ >>>>>>>>>>>> > > > Gluster-users mailing list >>>>>>>>>>>> > > > Gluster-users at gluster.org >>>>>>>>>>>> > > > http://www.gluster.org/mailman/listinfo/gluster-users >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> > > > _______________________________________________ >>>>>>>>>>>> > > > Gluster-users mailing list >>>>>>>>>>>> > > > Gluster-users at gluster.org >>>>>>>>>>>> > > > http://www.gluster.org/mailman/listinfo/gluster-users >>>>>>>>>>>> > > >>>>>>>>>>>> > > -- >>>>>>>>>>>> > > Thanks, >>>>>>>>>>>> > > Anuradha. >>>>>>>>>>>> > > >>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Thanks, >>>>>>>>>>>> Anuradha. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160831/71f2a639/attachment.html>
Just figured the steps Anuradha has provided won't work if granular entry heal is on. So when you bring down a brick and create fake2 under / of the volume, granular entry heal feature causes sh to remember only the fact that 'fake2' needs to be recreated on the offline brick (because changelogs are granular). In this case, we would be required to indicate to self-heal-daemon that the entire directory tree from '/' needs to be repaired on the brick that contains no data. To fix this, I did the following (for users who use granular entry self-healing): 1. Kill the last brick process in the replica (/bricks/3) 2. [root at server-3 ~]# rm -rf /bricks/3 3. [root at server-3 ~]# mkdir /bricks/3 4. Create a new dir on the mount point: [root at client-1 ~]# mkdir /mnt/fake 5. Set some fake xattr on the root of the volume, and not the 'fake' directory itself. [root at client-1 ~]# setfattr -n "user.some-name" -v "some-value" /mnt 6. Make sure there's no io happening on your volume. 7. Check the pending xattrs on the brick directories of the two good copies (on bricks 1 and 2), you should be seeing same values as the one marked in red in both bricks. (note that the client-<num> xattr key will have the same last digit as the index of the brick that is down, when counting from 0. So if the first brick is the one that is down, it would read trusted.afr.*-client-0; if the second brick is the one that is empty and down, it would read trusted.afr.*-client-1 and so on). [root at server-1 ~]# getfattr -d -m . -e hex /bricks/1 # file: 1 security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f7 23a6574635f72756e74696d655f743a733000 trusted.afr.dirty=0x000000000000000000000000 *trusted.afr.rep-client-2=0x000000000000000100000001* trusted.gfid=0x00000000000000000000000000000001 trusted.glusterfs.dht=0x000000010000000000000000ffffffff trusted.glusterfs.volume-id=0xa349517bb9d44bdf96da8ea324f89e7b [root at server-2 ~]# getfattr -d -m . -e hex /bricks/2 # file: 2 security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f7 23a6574635f72756e74696d655f743a733000 trusted.afr.dirty=0x000000000000000000000000 *trusted.afr.rep-client-2=0x000**000000000000100000001* trusted.gfid=0x00000000000000000000000000000001 trusted.glusterfs.dht=0x000000010000000000000000ffffffff trusted.glusterfs.volume-id=0xa349517bb9d44bdf96da8ea324f89e7b 8. Flip the 8th digit in the trusted.afr.<VOLNAME>-client-2 to a 1. [root at server-1 ~]# setfattr -n trusted.afr.rep-client-2 -v *0x000000010000000100000001* /bricks/1 [root at server-2 ~]# setfattr -n trusted.afr.rep-client-2 -v *0x000000010000000100000001* /bricks/2 9. Get the xattrs again and check the xattrs are set properly now [root at server-1 ~]# getfattr -d -m . -e hex /bricks/1 # file: 1 security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f7 23a6574635f72756e74696d655f743a733000 trusted.afr.dirty=0x000000000000000000000000 *trusted.afr.rep-client-2=0x000**000010000000100000001* trusted.gfid=0x00000000000000000000000000000001 trusted.glusterfs.dht=0x000000010000000000000000ffffffff trusted.glusterfs.volume-id=0xa349517bb9d44bdf96da8ea324f89e7b [root at server-2 ~]# getfattr -d -m . -e hex /bricks/2 # file: 2 security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f7 23a6574635f72756e74696d655f743a733000 trusted.afr.dirty=0x000000000000000000000000 *trusted.afr.rep-client-2=0x000**000010000000100000001* trusted.gfid=0x00000000000000000000000000000001 trusted.glusterfs.dht=0x000000010000000000000000ffffffff trusted.glusterfs.volume-id=0xa349517bb9d44bdf96da8ea324f89e7b 10. Force-start the volume. [root at server-1 ~]# gluster volume start rep force volume start: rep: success 11. Monitor heal-info command to ensure the number of entries keeps growing. 12. Keep monitoring with step 10 and eventually the number of entries needing heal must come down to 0. Also the checksums of the files on the previously empty brick should now match with the copies on the other two bricks. Could you check if the above steps work for you, in your test environment? You caught a nice bug in the manual steps to follow when granular entry-heal is enabled and an empty brick needs heal. Thanks for reporting it. :) We will fix the documentation appropriately. -Krutika On Wed, Aug 31, 2016 at 11:29 AM, Krutika Dhananjay <kdhananj at redhat.com> wrote:> Tried this. > > With me, only 'fake2' gets healed after i bring the 'empty' brick back up > and it stops there unless I do a 'heal-full'. > > Is that what you're seeing as well? > > -Krutika > > On Wed, Aug 31, 2016 at 4:43 AM, David Gossage < > dgossage at carouselchecks.com> wrote: > >> Same issue brought up glusterd on problem node heal count still stuck at >> 6330. >> >> Ran gluster v heal GUSTER1 full >> >> glustershd on problem node shows a sweep starting and finishing in >> seconds. Other 2 nodes show no activity in log. They should start a sweep >> too shouldn't they? >> >> Tried starting from scratch >> >> kill -15 brickpid >> rm -Rf /brick >> mkdir -p /brick >> mkdir mkdir /gsmount/fake2 >> setfattr -n "user.some-name" -v "some-value" /gsmount/fake2 >> >> Heals visible dirs instantly then stops. >> >> gluster v heal GLUSTER1 full >> >> see sweep star on problem node and end almost instantly. no files added >> t heal list no files healed no more logging >> >> [2016-08-30 23:11:31.544331] I [MSGID: 108026] >> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >> starting full sweep on subvol GLUSTER1-client-1 >> [2016-08-30 23:11:33.776235] I [MSGID: 108026] >> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >> finished full sweep on subvol GLUSTER1-client-1 >> >> same results no matter which node you run command on. Still stuck with >> 6330 files showing needing healed out of 19k. still showing in logs no >> heals are occuring. >> >> Is their a way to forcibly reset any prior heal data? Could it be stuck >> on some past failed heal start? >> >> >> >> >> *David Gossage* >> *Carousel Checks Inc. | System Administrator* >> *Office* 708.613.2284 >> >> On Tue, Aug 30, 2016 at 10:03 AM, David Gossage < >> dgossage at carouselchecks.com> wrote: >> >>> On Tue, Aug 30, 2016 at 10:02 AM, David Gossage < >>> dgossage at carouselchecks.com> wrote: >>> >>>> updated test server to 3.8.3 >>>> >>>> Brick1: 192.168.71.10:/gluster2/brick1/1 >>>> Brick2: 192.168.71.11:/gluster2/brick2/1 >>>> Brick3: 192.168.71.12:/gluster2/brick3/1 >>>> Options Reconfigured: >>>> cluster.granular-entry-heal: on >>>> performance.readdir-ahead: on >>>> performance.read-ahead: off >>>> nfs.disable: on >>>> nfs.addr-namelookup: off >>>> nfs.enable-ino32: off >>>> cluster.background-self-heal-count: 16 >>>> cluster.self-heal-window-size: 1024 >>>> performance.quick-read: off >>>> performance.io-cache: off >>>> performance.stat-prefetch: off >>>> cluster.eager-lock: enable >>>> network.remote-dio: on >>>> cluster.quorum-type: auto >>>> cluster.server-quorum-type: server >>>> storage.owner-gid: 36 >>>> storage.owner-uid: 36 >>>> server.allow-insecure: on >>>> features.shard: on >>>> features.shard-block-size: 64MB >>>> performance.strict-o-direct: off >>>> cluster.locking-scheme: granular >>>> >>>> kill -15 brickpid >>>> rm -Rf /gluster2/brick3 >>>> mkdir -p /gluster2/brick3/1 >>>> mkdir mkdir /rhev/data-center/mnt/glusterSD/192.168.71.10 >>>> \:_glustershard/fake2 >>>> setfattr -n "user.some-name" -v "some-value" >>>> /rhev/data-center/mnt/glusterSD/192.168.71.10\:_glustershard/fake2 >>>> gluster v start glustershard force >>>> >>>> at this point brick process starts and all visible files including new >>>> dir are made on brick >>>> handful of shards are in heal statistics still but no .shard directory >>>> created and no increase in shard count >>>> >>>> gluster v heal glustershard >>>> >>>> At this point still no increase in count or dir made no additional >>>> activity in logs for healing generated. waited few minutes tailing logs to >>>> check if anything kicked in. >>>> >>>> gluster v heal glustershard full >>>> >>>> gluster shards added to list and heal commences. logs show full sweep >>>> starting on all 3 nodes. though this time it only shows as finishing on >>>> one which looks to be the one that had brick deleted. >>>> >>>> [2016-08-30 14:45:33.098589] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-0 >>>> [2016-08-30 14:45:33.099492] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-1 >>>> [2016-08-30 14:45:33.100093] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-2 >>>> [2016-08-30 14:52:29.760213] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> finished full sweep on subvol glustershard-client-2 >>>> >>> >>> Just realized its still healing so that may be why sweep on 2 other >>> bricks haven't replied as finished. >>> >>>> >>>> >>>> my hope is that later tonight a full heal will work on production. Is >>>> it possible self-heal daemon can get stale or stop listening but still show >>>> as active? Would stopping and starting self-heal daemon from gluster cli >>>> before doing these heals be helpful? >>>> >>>> >>>> On Tue, Aug 30, 2016 at 9:29 AM, David Gossage < >>>> dgossage at carouselchecks.com> wrote: >>>> >>>>> On Tue, Aug 30, 2016 at 8:52 AM, David Gossage < >>>>> dgossage at carouselchecks.com> wrote: >>>>> >>>>>> On Tue, Aug 30, 2016 at 8:01 AM, Krutika Dhananjay < >>>>>> kdhananj at redhat.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Tue, Aug 30, 2016 at 6:20 PM, Krutika Dhananjay < >>>>>>> kdhananj at redhat.com> wrote: >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Aug 30, 2016 at 6:07 PM, David Gossage < >>>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>>> >>>>>>>>> On Tue, Aug 30, 2016 at 7:18 AM, Krutika Dhananjay < >>>>>>>>> kdhananj at redhat.com> wrote: >>>>>>>>> >>>>>>>>>> Could you also share the glustershd logs? >>>>>>>>>> >>>>>>>>> >>>>>>>>> I'll get them when I get to work sure >>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> I tried the same steps that you mentioned multiple times, but >>>>>>>>>> heal is running to completion without any issues. >>>>>>>>>> >>>>>>>>>> It must be said that 'heal full' traverses the files and >>>>>>>>>> directories in a depth-first order and does heals also in the same order. >>>>>>>>>> But if it gets interrupted in the middle (say because self-heal-daemon was >>>>>>>>>> either intentionally or unintentionally brought offline and then brought >>>>>>>>>> back up), self-heal will only pick up the entries that are so far marked as >>>>>>>>>> new-entries that need heal which it will find in indices/xattrop directory. >>>>>>>>>> What this means is that those files and directories that were not visited >>>>>>>>>> during the crawl, will remain untouched and unhealed in this second >>>>>>>>>> iteration of heal, unless you execute a 'heal-full' again. >>>>>>>>>> >>>>>>>>> >>>>>>>>> So should it start healing shards as it crawls or not until after >>>>>>>>> it crawls the entire .shard directory? At the pace it was going that could >>>>>>>>> be a week with one node appearing in the cluster but with no shard files if >>>>>>>>> anything tries to access a file on that node. From my experience other day >>>>>>>>> telling it to heal full again did nothing regardless of node used. >>>>>>>>> >>>>>>>> >>>>>>> Crawl is started from '/' of the volume. Whenever self-heal detects >>>>>>> during the crawl that a file or directory is present in some brick(s) and >>>>>>> absent in others, it creates the file on the bricks where it is absent and >>>>>>> marks the fact that the file or directory might need data/entry and >>>>>>> metadata heal too (this also means that an index is created under >>>>>>> .glusterfs/indices/xattrop of the src bricks). And the data/entry and >>>>>>> metadata heal are picked up and done in >>>>>>> >>>>>> the background with the help of these indices. >>>>>>> >>>>>> >>>>>> Looking at my 3rd node as example i find nearly an exact same number >>>>>> of files in xattrop dir as reported by heal count at time I brought down >>>>>> node2 to try and alleviate read io errors that seemed to occur from what I >>>>>> was guessing as attempts to use the node with no shards for reads. >>>>>> >>>>>> Also attached are the glustershd logs from the 3 nodes, along with >>>>>> the test node i tried yesterday with same results. >>>>>> >>>>> >>>>> Looking at my own logs I notice that a full sweep was only ever >>>>> recorded in glustershd.log on 2nd node with missing directory. I believe I >>>>> should have found a sweep begun on every node correct? >>>>> >>>>> On my test dev when it did work I do see that >>>>> >>>>> [2016-08-30 13:56:25.223333] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: starting full sweep on subvol >>>>> glustershard-client-0 >>>>> [2016-08-30 13:56:25.223522] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: starting full sweep on subvol >>>>> glustershard-client-1 >>>>> [2016-08-30 13:56:25.224616] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: starting full sweep on subvol >>>>> glustershard-client-2 >>>>> [2016-08-30 14:18:48.333740] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: finished full sweep on subvol >>>>> glustershard-client-2 >>>>> [2016-08-30 14:18:48.356008] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: finished full sweep on subvol >>>>> glustershard-client-1 >>>>> [2016-08-30 14:18:49.637811] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: finished full sweep on subvol >>>>> glustershard-client-0 >>>>> >>>>> While when looking at past few days of the 3 prod nodes i only found >>>>> that on my 2nd node >>>>> [2016-08-27 01:26:42.638772] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> starting full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 11:37:01.732366] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> finished full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 12:58:34.597228] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> starting full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 12:59:28.041173] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> finished full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 20:03:42.560188] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> starting full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 20:03:44.278274] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> finished full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 21:00:42.603315] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> starting full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 21:00:46.148674] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> finished full sweep on subvol GLUSTER1-client-1 >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> >>>>>>> >>>>>>>>> >>>>>>>>>> My suspicion is that this is what happened on your setup. Could >>>>>>>>>> you confirm if that was the case? >>>>>>>>>> >>>>>>>>> >>>>>>>>> Brick was brought online with force start then a full heal >>>>>>>>> launched. Hours later after it became evident that it was not adding new >>>>>>>>> files to heal I did try restarting self-heal daemon and relaunching full >>>>>>>>> heal again. But this was after the heal had basically already failed to >>>>>>>>> work as intended. >>>>>>>>> >>>>>>>> >>>>>>>> OK. How did you figure it was not adding any new files? I need to >>>>>>>> know what places you were monitoring to come to this conclusion. >>>>>>>> >>>>>>>> -Krutika >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> As for those logs, I did manager to do something that caused >>>>>>>>>> these warning messages you shared earlier to appear in my client and server >>>>>>>>>> logs. >>>>>>>>>> Although these logs are annoying and a bit scary too, they didn't >>>>>>>>>> do any harm to the data in my volume. Why they appear just after a brick is >>>>>>>>>> replaced and under no other circumstances is something I'm still >>>>>>>>>> investigating. >>>>>>>>>> >>>>>>>>>> But for future, it would be good to follow the steps Anuradha >>>>>>>>>> gave as that would allow self-heal to at least detect that it has some >>>>>>>>>> repairing to do whenever it is restarted whether intentionally or otherwise. >>>>>>>>>> >>>>>>>>> >>>>>>>>> I followed those steps as described on my test box and ended up >>>>>>>>> with exact same outcome of adding shards at an agonizing slow pace and no >>>>>>>>> creation of .shard directory or heals on shard directory. Directories >>>>>>>>> visible from mount healed quickly. This was with one VM so it has only 800 >>>>>>>>> shards as well. After hours at work it had added a total of 33 shards to >>>>>>>>> be healed. I sent those logs yesterday as well though not the glustershd. >>>>>>>>> >>>>>>>>> Does replace-brick command copy files in same manner? For these >>>>>>>>> purposes I am contemplating just skipping the heal route. >>>>>>>>> >>>>>>>>> >>>>>>>>>> -Krutika >>>>>>>>>> >>>>>>>>>> On Tue, Aug 30, 2016 at 2:22 AM, David Gossage < >>>>>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>>>>> >>>>>>>>>>> attached brick and client logs from test machine where same >>>>>>>>>>> behavior occurred not sure if anything new is there. its still on 3.8.2 >>>>>>>>>>> >>>>>>>>>>> Number of Bricks: 1 x 3 = 3 >>>>>>>>>>> Transport-type: tcp >>>>>>>>>>> Bricks: >>>>>>>>>>> Brick1: 192.168.71.10:/gluster2/brick1/1 >>>>>>>>>>> Brick2: 192.168.71.11:/gluster2/brick2/1 >>>>>>>>>>> Brick3: 192.168.71.12:/gluster2/brick3/1 >>>>>>>>>>> Options Reconfigured: >>>>>>>>>>> cluster.locking-scheme: granular >>>>>>>>>>> performance.strict-o-direct: off >>>>>>>>>>> features.shard-block-size: 64MB >>>>>>>>>>> features.shard: on >>>>>>>>>>> server.allow-insecure: on >>>>>>>>>>> storage.owner-uid: 36 >>>>>>>>>>> storage.owner-gid: 36 >>>>>>>>>>> cluster.server-quorum-type: server >>>>>>>>>>> cluster.quorum-type: auto >>>>>>>>>>> network.remote-dio: on >>>>>>>>>>> cluster.eager-lock: enable >>>>>>>>>>> performance.stat-prefetch: off >>>>>>>>>>> performance.io-cache: off >>>>>>>>>>> performance.quick-read: off >>>>>>>>>>> cluster.self-heal-window-size: 1024 >>>>>>>>>>> cluster.background-self-heal-count: 16 >>>>>>>>>>> nfs.enable-ino32: off >>>>>>>>>>> nfs.addr-namelookup: off >>>>>>>>>>> nfs.disable: on >>>>>>>>>>> performance.read-ahead: off >>>>>>>>>>> performance.readdir-ahead: on >>>>>>>>>>> cluster.granular-entry-heal: on >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Mon, Aug 29, 2016 at 2:20 PM, David Gossage < >>>>>>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> On Mon, Aug 29, 2016 at 7:01 AM, Anuradha Talur < >>>>>>>>>>>> atalur at redhat.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> ----- Original Message ----- >>>>>>>>>>>>> > From: "David Gossage" <dgossage at carouselchecks.com> >>>>>>>>>>>>> > To: "Anuradha Talur" <atalur at redhat.com> >>>>>>>>>>>>> > Cc: "gluster-users at gluster.org List" < >>>>>>>>>>>>> Gluster-users at gluster.org>, "Krutika Dhananjay" < >>>>>>>>>>>>> kdhananj at redhat.com> >>>>>>>>>>>>> > Sent: Monday, August 29, 2016 5:12:42 PM >>>>>>>>>>>>> > Subject: Re: [Gluster-users] 3.8.3 Shards Healing Glacier >>>>>>>>>>>>> Slow >>>>>>>>>>>>> > >>>>>>>>>>>>> > On Mon, Aug 29, 2016 at 5:39 AM, Anuradha Talur < >>>>>>>>>>>>> atalur at redhat.com> wrote: >>>>>>>>>>>>> > >>>>>>>>>>>>> > > Response inline. >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > ----- Original Message ----- >>>>>>>>>>>>> > > > From: "Krutika Dhananjay" <kdhananj at redhat.com> >>>>>>>>>>>>> > > > To: "David Gossage" <dgossage at carouselchecks.com> >>>>>>>>>>>>> > > > Cc: "gluster-users at gluster.org List" < >>>>>>>>>>>>> Gluster-users at gluster.org> >>>>>>>>>>>>> > > > Sent: Monday, August 29, 2016 3:55:04 PM >>>>>>>>>>>>> > > > Subject: Re: [Gluster-users] 3.8.3 Shards Healing >>>>>>>>>>>>> Glacier Slow >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > Could you attach both client and brick logs? Meanwhile I >>>>>>>>>>>>> will try these >>>>>>>>>>>>> > > steps >>>>>>>>>>>>> > > > out on my machines and see if it is easily recreatable. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > -Krutika >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > On Mon, Aug 29, 2016 at 2:31 PM, David Gossage < >>>>>>>>>>>>> > > dgossage at carouselchecks.com >>>>>>>>>>>>> > > > > wrote: >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > Centos 7 Gluster 3.8.3 >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > Brick1: ccgl1.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>>> > > > Brick2: ccgl2.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>>> > > > Brick3: ccgl4.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>>> > > > Options Reconfigured: >>>>>>>>>>>>> > > > cluster.data-self-heal-algorithm: full >>>>>>>>>>>>> > > > cluster.self-heal-daemon: on >>>>>>>>>>>>> > > > cluster.locking-scheme: granular >>>>>>>>>>>>> > > > features.shard-block-size: 64MB >>>>>>>>>>>>> > > > features.shard: on >>>>>>>>>>>>> > > > performance.readdir-ahead: on >>>>>>>>>>>>> > > > storage.owner-uid: 36 >>>>>>>>>>>>> > > > storage.owner-gid: 36 >>>>>>>>>>>>> > > > performance.quick-read: off >>>>>>>>>>>>> > > > performance.read-ahead: off >>>>>>>>>>>>> > > > performance.io-cache: off >>>>>>>>>>>>> > > > performance.stat-prefetch: on >>>>>>>>>>>>> > > > cluster.eager-lock: enable >>>>>>>>>>>>> > > > network.remote-dio: enable >>>>>>>>>>>>> > > > cluster.quorum-type: auto >>>>>>>>>>>>> > > > cluster.server-quorum-type: server >>>>>>>>>>>>> > > > server.allow-insecure: on >>>>>>>>>>>>> > > > cluster.self-heal-window-size: 1024 >>>>>>>>>>>>> > > > cluster.background-self-heal-count: 16 >>>>>>>>>>>>> > > > performance.strict-write-ordering: off >>>>>>>>>>>>> > > > nfs.disable: on >>>>>>>>>>>>> > > > nfs.addr-namelookup: off >>>>>>>>>>>>> > > > nfs.enable-ino32: off >>>>>>>>>>>>> > > > cluster.granular-entry-heal: on >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > Friday did rolling upgrade from 3.8.3->3.8.3 no issues. >>>>>>>>>>>>> > > > Following steps detailed in previous recommendations >>>>>>>>>>>>> began proces of >>>>>>>>>>>>> > > > replacing and healngbricks one node at a time. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > 1) kill pid of brick >>>>>>>>>>>>> > > > 2) reconfigure brick from raid6 to raid10 >>>>>>>>>>>>> > > > 3) recreate directory of brick >>>>>>>>>>>>> > > > 4) gluster volume start <> force >>>>>>>>>>>>> > > > 5) gluster volume heal <> full >>>>>>>>>>>>> > > Hi, >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > I'd suggest that full heal is not used. There are a few >>>>>>>>>>>>> bugs in full heal. >>>>>>>>>>>>> > > Better safe than sorry ;) >>>>>>>>>>>>> > > Instead I'd suggest the following steps: >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > Currently I brought the node down by systemctl stop >>>>>>>>>>>>> glusterd as I was >>>>>>>>>>>>> > getting sporadic io issues and a few VM's paused so hoping >>>>>>>>>>>>> that will help. >>>>>>>>>>>>> > I may wait to do this till around 4PM when most work is done >>>>>>>>>>>>> in case it >>>>>>>>>>>>> > shoots load up. >>>>>>>>>>>>> > >>>>>>>>>>>>> > >>>>>>>>>>>>> > > 1) kill pid of brick >>>>>>>>>>>>> > > 2) to configuring of brick that you need >>>>>>>>>>>>> > > 3) recreate brick dir >>>>>>>>>>>>> > > 4) while the brick is still down, from the mount point: >>>>>>>>>>>>> > > a) create a dummy non existent dir under / of mount. >>>>>>>>>>>>> > > >>>>>>>>>>>>> > >>>>>>>>>>>>> > so if noee 2 is down brick, pick node for example 3 and make >>>>>>>>>>>>> a test dir >>>>>>>>>>>>> > under its brick directory that doesnt exist on 2 or should I >>>>>>>>>>>>> be dong this >>>>>>>>>>>>> > over a gluster mount? >>>>>>>>>>>>> You should be doing this over gluster mount. >>>>>>>>>>>>> > >>>>>>>>>>>>> > > b) set a non existent extended attribute on / of mount. >>>>>>>>>>>>> > > >>>>>>>>>>>>> > >>>>>>>>>>>>> > Could you give me an example of an attribute to set? I've >>>>>>>>>>>>> read a tad on >>>>>>>>>>>>> > this, and looked up attributes but haven't set any yet >>>>>>>>>>>>> myself. >>>>>>>>>>>>> > >>>>>>>>>>>>> Sure. setfattr -n "user.some-name" -v "some-value" >>>>>>>>>>>>> <path-to-mount> >>>>>>>>>>>>> > Doing these steps will ensure that heal happens only from >>>>>>>>>>>>> updated brick to >>>>>>>>>>>>> > > down brick. >>>>>>>>>>>>> > > 5) gluster v start <> force >>>>>>>>>>>>> > > 6) gluster v heal <> >>>>>>>>>>>>> > > >>>>>>>>>>>>> > >>>>>>>>>>>>> > Will it matter if somewhere in gluster the full heal command >>>>>>>>>>>>> was run other >>>>>>>>>>>>> > day? Not sure if it eventually stops or times out. >>>>>>>>>>>>> > >>>>>>>>>>>>> full heal will stop once the crawl is done. So if you want to >>>>>>>>>>>>> trigger heal again, >>>>>>>>>>>>> run gluster v heal <>. Actually even brick up or volume start >>>>>>>>>>>>> force should >>>>>>>>>>>>> trigger the heal. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Did this on test bed today. its one server with 3 bricks on >>>>>>>>>>>> same machine so take that for what its worth. also it still runs 3.8.2. >>>>>>>>>>>> Maybe ill update and re-run test. >>>>>>>>>>>> >>>>>>>>>>>> killed brick >>>>>>>>>>>> deleted brick dir >>>>>>>>>>>> recreated brick dir >>>>>>>>>>>> created fake dir on gluster mount >>>>>>>>>>>> set suggested fake attribute on it >>>>>>>>>>>> ran volume start <> force >>>>>>>>>>>> >>>>>>>>>>>> looked at files it said needed healing and it was just 8 shards >>>>>>>>>>>> that were modified for few minutes I ran through steps >>>>>>>>>>>> >>>>>>>>>>>> gave it few minutes and it stayed same >>>>>>>>>>>> ran gluster volume <> heal >>>>>>>>>>>> >>>>>>>>>>>> it healed all the directories and files you can see over mount >>>>>>>>>>>> including fakedir. >>>>>>>>>>>> >>>>>>>>>>>> same issue for shards though. it adds more shards to heal at >>>>>>>>>>>> glacier pace. slight jump in speed if I stat every file and dir in VM >>>>>>>>>>>> running but not all shards. >>>>>>>>>>>> >>>>>>>>>>>> It started with 8 shards to heal and is now only at 33 out of >>>>>>>>>>>> 800 and probably wont finish adding for few days at rate it goes. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > > 1st node worked as expected took 12 hours to heal 1TB >>>>>>>>>>>>> data. Load was >>>>>>>>>>>>> > > little >>>>>>>>>>>>> > > > heavy but nothing shocking. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > About an hour after node 1 finished I began same process >>>>>>>>>>>>> on node2. Heal >>>>>>>>>>>>> > > > proces kicked in as before and the files in directories >>>>>>>>>>>>> visible from >>>>>>>>>>>>> > > mount >>>>>>>>>>>>> > > > and .glusterfs healed in short time. Then it began crawl >>>>>>>>>>>>> of .shard adding >>>>>>>>>>>>> > > > those files to heal count at which point the entire >>>>>>>>>>>>> proces ground to a >>>>>>>>>>>>> > > halt >>>>>>>>>>>>> > > > basically. After 48 hours out of 19k shards it has added >>>>>>>>>>>>> 5900 to heal >>>>>>>>>>>>> > > list. >>>>>>>>>>>>> > > > Load on all 3 machnes is negligible. It was suggested to >>>>>>>>>>>>> change this >>>>>>>>>>>>> > > value >>>>>>>>>>>>> > > > to full cluster.data-self-heal-algorithm and restart >>>>>>>>>>>>> volume which I >>>>>>>>>>>>> > > did. No >>>>>>>>>>>>> > > > efffect. Tried relaunching heal no effect, despite any >>>>>>>>>>>>> node picked. I >>>>>>>>>>>>> > > > started each VM and performed a stat of all files from >>>>>>>>>>>>> within it, or a >>>>>>>>>>>>> > > full >>>>>>>>>>>>> > > > virus scan and that seemed to cause short small spikes >>>>>>>>>>>>> in shards added, >>>>>>>>>>>>> > > but >>>>>>>>>>>>> > > > not by much. Logs are showing no real messages >>>>>>>>>>>>> indicating anything is >>>>>>>>>>>>> > > going >>>>>>>>>>>>> > > > on. I get hits to brick log on occasion of null lookups >>>>>>>>>>>>> making me think >>>>>>>>>>>>> > > its >>>>>>>>>>>>> > > > not really crawling shards directory but waiting for a >>>>>>>>>>>>> shard lookup to >>>>>>>>>>>>> > > add >>>>>>>>>>>>> > > > it. I'll get following in brick log but not constant and >>>>>>>>>>>>> sometime >>>>>>>>>>>>> > > multiple >>>>>>>>>>>>> > > > for same shard. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > [2016-08-29 08:31:57.478125] W [MSGID: 115009] >>>>>>>>>>>>> > > > [server-resolve.c:569:server_resolve] >>>>>>>>>>>>> 0-GLUSTER1-server: no resolution >>>>>>>>>>>>> > > type >>>>>>>>>>>>> > > > for (null) (LOOKUP) >>>>>>>>>>>>> > > > [2016-08-29 08:31:57.478170] E [MSGID: 115050] >>>>>>>>>>>>> > > > [server-rpc-fops.c:156:server_lookup_cbk] >>>>>>>>>>>>> 0-GLUSTER1-server: 12591783: >>>>>>>>>>>>> > > > LOOKUP (null) (00000000-0000-0000-00 >>>>>>>>>>>>> > > > 00-000000000000/241a55ed-f0d5-4dbc-a6ce-ab784a0ba6ff.221) >>>>>>>>>>>>> ==> (Invalid >>>>>>>>>>>>> > > > argument) [Invalid argument] >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > This one repeated about 30 times in row then nothing for >>>>>>>>>>>>> 10 minutes then >>>>>>>>>>>>> > > one >>>>>>>>>>>>> > > > hit for one different shard by itself. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > How can I determine if Heal is actually running? How can >>>>>>>>>>>>> I kill it or >>>>>>>>>>>>> > > force >>>>>>>>>>>>> > > > restart? Does node I start it from determine which >>>>>>>>>>>>> directory gets >>>>>>>>>>>>> > > crawled to >>>>>>>>>>>>> > > > determine heals? >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > David Gossage >>>>>>>>>>>>> > > > Carousel Checks Inc. | System Administrator >>>>>>>>>>>>> > > > Office 708.613.2284 >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > _______________________________________________ >>>>>>>>>>>>> > > > Gluster-users mailing list >>>>>>>>>>>>> > > > Gluster-users at gluster.org >>>>>>>>>>>>> > > > http://www.gluster.org/mailman/listinfo/gluster-users >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > _______________________________________________ >>>>>>>>>>>>> > > > Gluster-users mailing list >>>>>>>>>>>>> > > > Gluster-users at gluster.org >>>>>>>>>>>>> > > > http://www.gluster.org/mailman/listinfo/gluster-users >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > -- >>>>>>>>>>>>> > > Thanks, >>>>>>>>>>>>> > > Anuradha. >>>>>>>>>>>>> > > >>>>>>>>>>>>> > >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Thanks, >>>>>>>>>>>>> Anuradha. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160831/c848949d/attachment-0001.html>
On Wed, Aug 31, 2016 at 12:59 AM, Krutika Dhananjay <kdhananj at redhat.com> wrote:> Tried this. > > With me, only 'fake2' gets healed after i bring the 'empty' brick back up > and it stops there unless I do a 'heal-full'. >When you say heal-full is that a command I don't see when running gluster help or are you just abbreviating the 'gluster v heal <> full' line?> > Is that what you're seeing as well? >Yes and no. Right now on my prod even if running heal <> full nothing happens. My understanding is that a sweep should occur on each brick and it only occurs on the down node then no shard healing occurs.> > -Krutika > > On Wed, Aug 31, 2016 at 4:43 AM, David Gossage < > dgossage at carouselchecks.com> wrote: > >> Same issue brought up glusterd on problem node heal count still stuck at >> 6330. >> >> Ran gluster v heal GUSTER1 full >> >> glustershd on problem node shows a sweep starting and finishing in >> seconds. Other 2 nodes show no activity in log. They should start a sweep >> too shouldn't they? >> >> Tried starting from scratch >> >> kill -15 brickpid >> rm -Rf /brick >> mkdir -p /brick >> mkdir mkdir /gsmount/fake2 >> setfattr -n "user.some-name" -v "some-value" /gsmount/fake2 >> >> Heals visible dirs instantly then stops. >> >> gluster v heal GLUSTER1 full >> >> see sweep star on problem node and end almost instantly. no files added >> t heal list no files healed no more logging >> >> [2016-08-30 23:11:31.544331] I [MSGID: 108026] >> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >> starting full sweep on subvol GLUSTER1-client-1 >> [2016-08-30 23:11:33.776235] I [MSGID: 108026] >> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >> finished full sweep on subvol GLUSTER1-client-1 >> >> same results no matter which node you run command on. Still stuck with >> 6330 files showing needing healed out of 19k. still showing in logs no >> heals are occuring. >> >> Is their a way to forcibly reset any prior heal data? Could it be stuck >> on some past failed heal start? >> >> >> >> >> *David Gossage* >> *Carousel Checks Inc. | System Administrator* >> *Office* 708.613.2284 >> >> On Tue, Aug 30, 2016 at 10:03 AM, David Gossage < >> dgossage at carouselchecks.com> wrote: >> >>> On Tue, Aug 30, 2016 at 10:02 AM, David Gossage < >>> dgossage at carouselchecks.com> wrote: >>> >>>> updated test server to 3.8.3 >>>> >>>> Brick1: 192.168.71.10:/gluster2/brick1/1 >>>> Brick2: 192.168.71.11:/gluster2/brick2/1 >>>> Brick3: 192.168.71.12:/gluster2/brick3/1 >>>> Options Reconfigured: >>>> cluster.granular-entry-heal: on >>>> performance.readdir-ahead: on >>>> performance.read-ahead: off >>>> nfs.disable: on >>>> nfs.addr-namelookup: off >>>> nfs.enable-ino32: off >>>> cluster.background-self-heal-count: 16 >>>> cluster.self-heal-window-size: 1024 >>>> performance.quick-read: off >>>> performance.io-cache: off >>>> performance.stat-prefetch: off >>>> cluster.eager-lock: enable >>>> network.remote-dio: on >>>> cluster.quorum-type: auto >>>> cluster.server-quorum-type: server >>>> storage.owner-gid: 36 >>>> storage.owner-uid: 36 >>>> server.allow-insecure: on >>>> features.shard: on >>>> features.shard-block-size: 64MB >>>> performance.strict-o-direct: off >>>> cluster.locking-scheme: granular >>>> >>>> kill -15 brickpid >>>> rm -Rf /gluster2/brick3 >>>> mkdir -p /gluster2/brick3/1 >>>> mkdir mkdir /rhev/data-center/mnt/glusterSD/192.168.71.10 >>>> \:_glustershard/fake2 >>>> setfattr -n "user.some-name" -v "some-value" >>>> /rhev/data-center/mnt/glusterSD/192.168.71.10\:_glustershard/fake2 >>>> gluster v start glustershard force >>>> >>>> at this point brick process starts and all visible files including new >>>> dir are made on brick >>>> handful of shards are in heal statistics still but no .shard directory >>>> created and no increase in shard count >>>> >>>> gluster v heal glustershard >>>> >>>> At this point still no increase in count or dir made no additional >>>> activity in logs for healing generated. waited few minutes tailing logs to >>>> check if anything kicked in. >>>> >>>> gluster v heal glustershard full >>>> >>>> gluster shards added to list and heal commences. logs show full sweep >>>> starting on all 3 nodes. though this time it only shows as finishing on >>>> one which looks to be the one that had brick deleted. >>>> >>>> [2016-08-30 14:45:33.098589] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-0 >>>> [2016-08-30 14:45:33.099492] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-1 >>>> [2016-08-30 14:45:33.100093] I [MSGID: 108026] >>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> starting full sweep on subvol glustershard-client-2 >>>> [2016-08-30 14:52:29.760213] I [MSGID: 108026] >>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-glustershard-replicate-0: >>>> finished full sweep on subvol glustershard-client-2 >>>> >>> >>> Just realized its still healing so that may be why sweep on 2 other >>> bricks haven't replied as finished. >>> >>>> >>>> >>>> my hope is that later tonight a full heal will work on production. Is >>>> it possible self-heal daemon can get stale or stop listening but still show >>>> as active? Would stopping and starting self-heal daemon from gluster cli >>>> before doing these heals be helpful? >>>> >>>> >>>> On Tue, Aug 30, 2016 at 9:29 AM, David Gossage < >>>> dgossage at carouselchecks.com> wrote: >>>> >>>>> On Tue, Aug 30, 2016 at 8:52 AM, David Gossage < >>>>> dgossage at carouselchecks.com> wrote: >>>>> >>>>>> On Tue, Aug 30, 2016 at 8:01 AM, Krutika Dhananjay < >>>>>> kdhananj at redhat.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Tue, Aug 30, 2016 at 6:20 PM, Krutika Dhananjay < >>>>>>> kdhananj at redhat.com> wrote: >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Aug 30, 2016 at 6:07 PM, David Gossage < >>>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>>> >>>>>>>>> On Tue, Aug 30, 2016 at 7:18 AM, Krutika Dhananjay < >>>>>>>>> kdhananj at redhat.com> wrote: >>>>>>>>> >>>>>>>>>> Could you also share the glustershd logs? >>>>>>>>>> >>>>>>>>> >>>>>>>>> I'll get them when I get to work sure >>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> I tried the same steps that you mentioned multiple times, but >>>>>>>>>> heal is running to completion without any issues. >>>>>>>>>> >>>>>>>>>> It must be said that 'heal full' traverses the files and >>>>>>>>>> directories in a depth-first order and does heals also in the same order. >>>>>>>>>> But if it gets interrupted in the middle (say because self-heal-daemon was >>>>>>>>>> either intentionally or unintentionally brought offline and then brought >>>>>>>>>> back up), self-heal will only pick up the entries that are so far marked as >>>>>>>>>> new-entries that need heal which it will find in indices/xattrop directory. >>>>>>>>>> What this means is that those files and directories that were not visited >>>>>>>>>> during the crawl, will remain untouched and unhealed in this second >>>>>>>>>> iteration of heal, unless you execute a 'heal-full' again. >>>>>>>>>> >>>>>>>>> >>>>>>>>> So should it start healing shards as it crawls or not until after >>>>>>>>> it crawls the entire .shard directory? At the pace it was going that could >>>>>>>>> be a week with one node appearing in the cluster but with no shard files if >>>>>>>>> anything tries to access a file on that node. From my experience other day >>>>>>>>> telling it to heal full again did nothing regardless of node used. >>>>>>>>> >>>>>>>> >>>>>>> Crawl is started from '/' of the volume. Whenever self-heal detects >>>>>>> during the crawl that a file or directory is present in some brick(s) and >>>>>>> absent in others, it creates the file on the bricks where it is absent and >>>>>>> marks the fact that the file or directory might need data/entry and >>>>>>> metadata heal too (this also means that an index is created under >>>>>>> .glusterfs/indices/xattrop of the src bricks). And the data/entry and >>>>>>> metadata heal are picked up and done in >>>>>>> >>>>>> the background with the help of these indices. >>>>>>> >>>>>> >>>>>> Looking at my 3rd node as example i find nearly an exact same number >>>>>> of files in xattrop dir as reported by heal count at time I brought down >>>>>> node2 to try and alleviate read io errors that seemed to occur from what I >>>>>> was guessing as attempts to use the node with no shards for reads. >>>>>> >>>>>> Also attached are the glustershd logs from the 3 nodes, along with >>>>>> the test node i tried yesterday with same results. >>>>>> >>>>> >>>>> Looking at my own logs I notice that a full sweep was only ever >>>>> recorded in glustershd.log on 2nd node with missing directory. I believe I >>>>> should have found a sweep begun on every node correct? >>>>> >>>>> On my test dev when it did work I do see that >>>>> >>>>> [2016-08-30 13:56:25.223333] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: starting full sweep on subvol >>>>> glustershard-client-0 >>>>> [2016-08-30 13:56:25.223522] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: starting full sweep on subvol >>>>> glustershard-client-1 >>>>> [2016-08-30 13:56:25.224616] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: starting full sweep on subvol >>>>> glustershard-client-2 >>>>> [2016-08-30 14:18:48.333740] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: finished full sweep on subvol >>>>> glustershard-client-2 >>>>> [2016-08-30 14:18:48.356008] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: finished full sweep on subvol >>>>> glustershard-client-1 >>>>> [2016-08-30 14:18:49.637811] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] >>>>> 0-glustershard-replicate-0: finished full sweep on subvol >>>>> glustershard-client-0 >>>>> >>>>> While when looking at past few days of the 3 prod nodes i only found >>>>> that on my 2nd node >>>>> [2016-08-27 01:26:42.638772] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> starting full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 11:37:01.732366] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> finished full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 12:58:34.597228] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> starting full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 12:59:28.041173] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> finished full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 20:03:42.560188] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> starting full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 20:03:44.278274] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> finished full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 21:00:42.603315] I [MSGID: 108026] >>>>> [afr-self-heald.c:646:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> starting full sweep on subvol GLUSTER1-client-1 >>>>> [2016-08-27 21:00:46.148674] I [MSGID: 108026] >>>>> [afr-self-heald.c:656:afr_shd_full_healer] 0-GLUSTER1-replicate-0: >>>>> finished full sweep on subvol GLUSTER1-client-1 >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> >>>>>>> >>>>>>>>> >>>>>>>>>> My suspicion is that this is what happened on your setup. Could >>>>>>>>>> you confirm if that was the case? >>>>>>>>>> >>>>>>>>> >>>>>>>>> Brick was brought online with force start then a full heal >>>>>>>>> launched. Hours later after it became evident that it was not adding new >>>>>>>>> files to heal I did try restarting self-heal daemon and relaunching full >>>>>>>>> heal again. But this was after the heal had basically already failed to >>>>>>>>> work as intended. >>>>>>>>> >>>>>>>> >>>>>>>> OK. How did you figure it was not adding any new files? I need to >>>>>>>> know what places you were monitoring to come to this conclusion. >>>>>>>> >>>>>>>> -Krutika >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> As for those logs, I did manager to do something that caused >>>>>>>>>> these warning messages you shared earlier to appear in my client and server >>>>>>>>>> logs. >>>>>>>>>> Although these logs are annoying and a bit scary too, they didn't >>>>>>>>>> do any harm to the data in my volume. Why they appear just after a brick is >>>>>>>>>> replaced and under no other circumstances is something I'm still >>>>>>>>>> investigating. >>>>>>>>>> >>>>>>>>>> But for future, it would be good to follow the steps Anuradha >>>>>>>>>> gave as that would allow self-heal to at least detect that it has some >>>>>>>>>> repairing to do whenever it is restarted whether intentionally or otherwise. >>>>>>>>>> >>>>>>>>> >>>>>>>>> I followed those steps as described on my test box and ended up >>>>>>>>> with exact same outcome of adding shards at an agonizing slow pace and no >>>>>>>>> creation of .shard directory or heals on shard directory. Directories >>>>>>>>> visible from mount healed quickly. This was with one VM so it has only 800 >>>>>>>>> shards as well. After hours at work it had added a total of 33 shards to >>>>>>>>> be healed. I sent those logs yesterday as well though not the glustershd. >>>>>>>>> >>>>>>>>> Does replace-brick command copy files in same manner? For these >>>>>>>>> purposes I am contemplating just skipping the heal route. >>>>>>>>> >>>>>>>>> >>>>>>>>>> -Krutika >>>>>>>>>> >>>>>>>>>> On Tue, Aug 30, 2016 at 2:22 AM, David Gossage < >>>>>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>>>>> >>>>>>>>>>> attached brick and client logs from test machine where same >>>>>>>>>>> behavior occurred not sure if anything new is there. its still on 3.8.2 >>>>>>>>>>> >>>>>>>>>>> Number of Bricks: 1 x 3 = 3 >>>>>>>>>>> Transport-type: tcp >>>>>>>>>>> Bricks: >>>>>>>>>>> Brick1: 192.168.71.10:/gluster2/brick1/1 >>>>>>>>>>> Brick2: 192.168.71.11:/gluster2/brick2/1 >>>>>>>>>>> Brick3: 192.168.71.12:/gluster2/brick3/1 >>>>>>>>>>> Options Reconfigured: >>>>>>>>>>> cluster.locking-scheme: granular >>>>>>>>>>> performance.strict-o-direct: off >>>>>>>>>>> features.shard-block-size: 64MB >>>>>>>>>>> features.shard: on >>>>>>>>>>> server.allow-insecure: on >>>>>>>>>>> storage.owner-uid: 36 >>>>>>>>>>> storage.owner-gid: 36 >>>>>>>>>>> cluster.server-quorum-type: server >>>>>>>>>>> cluster.quorum-type: auto >>>>>>>>>>> network.remote-dio: on >>>>>>>>>>> cluster.eager-lock: enable >>>>>>>>>>> performance.stat-prefetch: off >>>>>>>>>>> performance.io-cache: off >>>>>>>>>>> performance.quick-read: off >>>>>>>>>>> cluster.self-heal-window-size: 1024 >>>>>>>>>>> cluster.background-self-heal-count: 16 >>>>>>>>>>> nfs.enable-ino32: off >>>>>>>>>>> nfs.addr-namelookup: off >>>>>>>>>>> nfs.disable: on >>>>>>>>>>> performance.read-ahead: off >>>>>>>>>>> performance.readdir-ahead: on >>>>>>>>>>> cluster.granular-entry-heal: on >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Mon, Aug 29, 2016 at 2:20 PM, David Gossage < >>>>>>>>>>> dgossage at carouselchecks.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> On Mon, Aug 29, 2016 at 7:01 AM, Anuradha Talur < >>>>>>>>>>>> atalur at redhat.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> ----- Original Message ----- >>>>>>>>>>>>> > From: "David Gossage" <dgossage at carouselchecks.com> >>>>>>>>>>>>> > To: "Anuradha Talur" <atalur at redhat.com> >>>>>>>>>>>>> > Cc: "gluster-users at gluster.org List" < >>>>>>>>>>>>> Gluster-users at gluster.org>, "Krutika Dhananjay" < >>>>>>>>>>>>> kdhananj at redhat.com> >>>>>>>>>>>>> > Sent: Monday, August 29, 2016 5:12:42 PM >>>>>>>>>>>>> > Subject: Re: [Gluster-users] 3.8.3 Shards Healing Glacier >>>>>>>>>>>>> Slow >>>>>>>>>>>>> > >>>>>>>>>>>>> > On Mon, Aug 29, 2016 at 5:39 AM, Anuradha Talur < >>>>>>>>>>>>> atalur at redhat.com> wrote: >>>>>>>>>>>>> > >>>>>>>>>>>>> > > Response inline. >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > ----- Original Message ----- >>>>>>>>>>>>> > > > From: "Krutika Dhananjay" <kdhananj at redhat.com> >>>>>>>>>>>>> > > > To: "David Gossage" <dgossage at carouselchecks.com> >>>>>>>>>>>>> > > > Cc: "gluster-users at gluster.org List" < >>>>>>>>>>>>> Gluster-users at gluster.org> >>>>>>>>>>>>> > > > Sent: Monday, August 29, 2016 3:55:04 PM >>>>>>>>>>>>> > > > Subject: Re: [Gluster-users] 3.8.3 Shards Healing >>>>>>>>>>>>> Glacier Slow >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > Could you attach both client and brick logs? Meanwhile I >>>>>>>>>>>>> will try these >>>>>>>>>>>>> > > steps >>>>>>>>>>>>> > > > out on my machines and see if it is easily recreatable. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > -Krutika >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > On Mon, Aug 29, 2016 at 2:31 PM, David Gossage < >>>>>>>>>>>>> > > dgossage at carouselchecks.com >>>>>>>>>>>>> > > > > wrote: >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > Centos 7 Gluster 3.8.3 >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > Brick1: ccgl1.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>>> > > > Brick2: ccgl2.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>>> > > > Brick3: ccgl4.gl.local:/gluster1/BRICK1/1 >>>>>>>>>>>>> > > > Options Reconfigured: >>>>>>>>>>>>> > > > cluster.data-self-heal-algorithm: full >>>>>>>>>>>>> > > > cluster.self-heal-daemon: on >>>>>>>>>>>>> > > > cluster.locking-scheme: granular >>>>>>>>>>>>> > > > features.shard-block-size: 64MB >>>>>>>>>>>>> > > > features.shard: on >>>>>>>>>>>>> > > > performance.readdir-ahead: on >>>>>>>>>>>>> > > > storage.owner-uid: 36 >>>>>>>>>>>>> > > > storage.owner-gid: 36 >>>>>>>>>>>>> > > > performance.quick-read: off >>>>>>>>>>>>> > > > performance.read-ahead: off >>>>>>>>>>>>> > > > performance.io-cache: off >>>>>>>>>>>>> > > > performance.stat-prefetch: on >>>>>>>>>>>>> > > > cluster.eager-lock: enable >>>>>>>>>>>>> > > > network.remote-dio: enable >>>>>>>>>>>>> > > > cluster.quorum-type: auto >>>>>>>>>>>>> > > > cluster.server-quorum-type: server >>>>>>>>>>>>> > > > server.allow-insecure: on >>>>>>>>>>>>> > > > cluster.self-heal-window-size: 1024 >>>>>>>>>>>>> > > > cluster.background-self-heal-count: 16 >>>>>>>>>>>>> > > > performance.strict-write-ordering: off >>>>>>>>>>>>> > > > nfs.disable: on >>>>>>>>>>>>> > > > nfs.addr-namelookup: off >>>>>>>>>>>>> > > > nfs.enable-ino32: off >>>>>>>>>>>>> > > > cluster.granular-entry-heal: on >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > Friday did rolling upgrade from 3.8.3->3.8.3 no issues. >>>>>>>>>>>>> > > > Following steps detailed in previous recommendations >>>>>>>>>>>>> began proces of >>>>>>>>>>>>> > > > replacing and healngbricks one node at a time. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > 1) kill pid of brick >>>>>>>>>>>>> > > > 2) reconfigure brick from raid6 to raid10 >>>>>>>>>>>>> > > > 3) recreate directory of brick >>>>>>>>>>>>> > > > 4) gluster volume start <> force >>>>>>>>>>>>> > > > 5) gluster volume heal <> full >>>>>>>>>>>>> > > Hi, >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > I'd suggest that full heal is not used. There are a few >>>>>>>>>>>>> bugs in full heal. >>>>>>>>>>>>> > > Better safe than sorry ;) >>>>>>>>>>>>> > > Instead I'd suggest the following steps: >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > Currently I brought the node down by systemctl stop >>>>>>>>>>>>> glusterd as I was >>>>>>>>>>>>> > getting sporadic io issues and a few VM's paused so hoping >>>>>>>>>>>>> that will help. >>>>>>>>>>>>> > I may wait to do this till around 4PM when most work is done >>>>>>>>>>>>> in case it >>>>>>>>>>>>> > shoots load up. >>>>>>>>>>>>> > >>>>>>>>>>>>> > >>>>>>>>>>>>> > > 1) kill pid of brick >>>>>>>>>>>>> > > 2) to configuring of brick that you need >>>>>>>>>>>>> > > 3) recreate brick dir >>>>>>>>>>>>> > > 4) while the brick is still down, from the mount point: >>>>>>>>>>>>> > > a) create a dummy non existent dir under / of mount. >>>>>>>>>>>>> > > >>>>>>>>>>>>> > >>>>>>>>>>>>> > so if noee 2 is down brick, pick node for example 3 and make >>>>>>>>>>>>> a test dir >>>>>>>>>>>>> > under its brick directory that doesnt exist on 2 or should I >>>>>>>>>>>>> be dong this >>>>>>>>>>>>> > over a gluster mount? >>>>>>>>>>>>> You should be doing this over gluster mount. >>>>>>>>>>>>> > >>>>>>>>>>>>> > > b) set a non existent extended attribute on / of mount. >>>>>>>>>>>>> > > >>>>>>>>>>>>> > >>>>>>>>>>>>> > Could you give me an example of an attribute to set? I've >>>>>>>>>>>>> read a tad on >>>>>>>>>>>>> > this, and looked up attributes but haven't set any yet >>>>>>>>>>>>> myself. >>>>>>>>>>>>> > >>>>>>>>>>>>> Sure. setfattr -n "user.some-name" -v "some-value" >>>>>>>>>>>>> <path-to-mount> >>>>>>>>>>>>> > Doing these steps will ensure that heal happens only from >>>>>>>>>>>>> updated brick to >>>>>>>>>>>>> > > down brick. >>>>>>>>>>>>> > > 5) gluster v start <> force >>>>>>>>>>>>> > > 6) gluster v heal <> >>>>>>>>>>>>> > > >>>>>>>>>>>>> > >>>>>>>>>>>>> > Will it matter if somewhere in gluster the full heal command >>>>>>>>>>>>> was run other >>>>>>>>>>>>> > day? Not sure if it eventually stops or times out. >>>>>>>>>>>>> > >>>>>>>>>>>>> full heal will stop once the crawl is done. So if you want to >>>>>>>>>>>>> trigger heal again, >>>>>>>>>>>>> run gluster v heal <>. Actually even brick up or volume start >>>>>>>>>>>>> force should >>>>>>>>>>>>> trigger the heal. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Did this on test bed today. its one server with 3 bricks on >>>>>>>>>>>> same machine so take that for what its worth. also it still runs 3.8.2. >>>>>>>>>>>> Maybe ill update and re-run test. >>>>>>>>>>>> >>>>>>>>>>>> killed brick >>>>>>>>>>>> deleted brick dir >>>>>>>>>>>> recreated brick dir >>>>>>>>>>>> created fake dir on gluster mount >>>>>>>>>>>> set suggested fake attribute on it >>>>>>>>>>>> ran volume start <> force >>>>>>>>>>>> >>>>>>>>>>>> looked at files it said needed healing and it was just 8 shards >>>>>>>>>>>> that were modified for few minutes I ran through steps >>>>>>>>>>>> >>>>>>>>>>>> gave it few minutes and it stayed same >>>>>>>>>>>> ran gluster volume <> heal >>>>>>>>>>>> >>>>>>>>>>>> it healed all the directories and files you can see over mount >>>>>>>>>>>> including fakedir. >>>>>>>>>>>> >>>>>>>>>>>> same issue for shards though. it adds more shards to heal at >>>>>>>>>>>> glacier pace. slight jump in speed if I stat every file and dir in VM >>>>>>>>>>>> running but not all shards. >>>>>>>>>>>> >>>>>>>>>>>> It started with 8 shards to heal and is now only at 33 out of >>>>>>>>>>>> 800 and probably wont finish adding for few days at rate it goes. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > > 1st node worked as expected took 12 hours to heal 1TB >>>>>>>>>>>>> data. Load was >>>>>>>>>>>>> > > little >>>>>>>>>>>>> > > > heavy but nothing shocking. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > About an hour after node 1 finished I began same process >>>>>>>>>>>>> on node2. Heal >>>>>>>>>>>>> > > > proces kicked in as before and the files in directories >>>>>>>>>>>>> visible from >>>>>>>>>>>>> > > mount >>>>>>>>>>>>> > > > and .glusterfs healed in short time. Then it began crawl >>>>>>>>>>>>> of .shard adding >>>>>>>>>>>>> > > > those files to heal count at which point the entire >>>>>>>>>>>>> proces ground to a >>>>>>>>>>>>> > > halt >>>>>>>>>>>>> > > > basically. After 48 hours out of 19k shards it has added >>>>>>>>>>>>> 5900 to heal >>>>>>>>>>>>> > > list. >>>>>>>>>>>>> > > > Load on all 3 machnes is negligible. It was suggested to >>>>>>>>>>>>> change this >>>>>>>>>>>>> > > value >>>>>>>>>>>>> > > > to full cluster.data-self-heal-algorithm and restart >>>>>>>>>>>>> volume which I >>>>>>>>>>>>> > > did. No >>>>>>>>>>>>> > > > efffect. Tried relaunching heal no effect, despite any >>>>>>>>>>>>> node picked. I >>>>>>>>>>>>> > > > started each VM and performed a stat of all files from >>>>>>>>>>>>> within it, or a >>>>>>>>>>>>> > > full >>>>>>>>>>>>> > > > virus scan and that seemed to cause short small spikes >>>>>>>>>>>>> in shards added, >>>>>>>>>>>>> > > but >>>>>>>>>>>>> > > > not by much. Logs are showing no real messages >>>>>>>>>>>>> indicating anything is >>>>>>>>>>>>> > > going >>>>>>>>>>>>> > > > on. I get hits to brick log on occasion of null lookups >>>>>>>>>>>>> making me think >>>>>>>>>>>>> > > its >>>>>>>>>>>>> > > > not really crawling shards directory but waiting for a >>>>>>>>>>>>> shard lookup to >>>>>>>>>>>>> > > add >>>>>>>>>>>>> > > > it. I'll get following in brick log but not constant and >>>>>>>>>>>>> sometime >>>>>>>>>>>>> > > multiple >>>>>>>>>>>>> > > > for same shard. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > [2016-08-29 08:31:57.478125] W [MSGID: 115009] >>>>>>>>>>>>> > > > [server-resolve.c:569:server_resolve] >>>>>>>>>>>>> 0-GLUSTER1-server: no resolution >>>>>>>>>>>>> > > type >>>>>>>>>>>>> > > > for (null) (LOOKUP) >>>>>>>>>>>>> > > > [2016-08-29 08:31:57.478170] E [MSGID: 115050] >>>>>>>>>>>>> > > > [server-rpc-fops.c:156:server_lookup_cbk] >>>>>>>>>>>>> 0-GLUSTER1-server: 12591783: >>>>>>>>>>>>> > > > LOOKUP (null) (00000000-0000-0000-00 >>>>>>>>>>>>> > > > 00-000000000000/241a55ed-f0d5-4dbc-a6ce-ab784a0ba6ff.221) >>>>>>>>>>>>> ==> (Invalid >>>>>>>>>>>>> > > > argument) [Invalid argument] >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > This one repeated about 30 times in row then nothing for >>>>>>>>>>>>> 10 minutes then >>>>>>>>>>>>> > > one >>>>>>>>>>>>> > > > hit for one different shard by itself. >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > How can I determine if Heal is actually running? How can >>>>>>>>>>>>> I kill it or >>>>>>>>>>>>> > > force >>>>>>>>>>>>> > > > restart? Does node I start it from determine which >>>>>>>>>>>>> directory gets >>>>>>>>>>>>> > > crawled to >>>>>>>>>>>>> > > > determine heals? >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > David Gossage >>>>>>>>>>>>> > > > Carousel Checks Inc. | System Administrator >>>>>>>>>>>>> > > > Office 708.613.2284 >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > _______________________________________________ >>>>>>>>>>>>> > > > Gluster-users mailing list >>>>>>>>>>>>> > > > Gluster-users at gluster.org >>>>>>>>>>>>> > > > http://www.gluster.org/mailman/listinfo/gluster-users >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > >>>>>>>>>>>>> > > > _______________________________________________ >>>>>>>>>>>>> > > > Gluster-users mailing list >>>>>>>>>>>>> > > > Gluster-users at gluster.org >>>>>>>>>>>>> > > > http://www.gluster.org/mailman/listinfo/gluster-users >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > -- >>>>>>>>>>>>> > > Thanks, >>>>>>>>>>>>> > > Anuradha. >>>>>>>>>>>>> > > >>>>>>>>>>>>> > >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Thanks, >>>>>>>>>>>>> Anuradha. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160831/93a58310/attachment.html>