Gluster users - Aug 2016 - 3.7.13 Upgrade to 3.8.1

On Sat, Aug 6, 2016 at 9:58 PM, Lindsay Mathieson <
lindsay.mathieson at gmail.com> wrote:
> On 7/08/2016 12:56 PM, David Gossage wrote:
>
>> My Dev server with one VM doing almost nothing handled update to 3.8.1
>> and op-version update just fine.
>>
>
> Good to know, thanks :)
>
>
> turned on the new granular setting but haven't simulated any brick
>> failures yet to see what happens.
>>
>>
> is that the "cluster.locking-scheme: granular" one? its available
in
> 3.7.12 as well, I've had it activate for a couple of weeks.

Granular Entry self-heal for AFR

*Notes for users:* This feature can be enabled using the command

gluster volume set <vol-name> granular-entry-heal on

*Limitations:* 1. The feature is not backward compatible. So please enable
the option only after you have upgraded all your clients and servers to 3.8
and op-version is 30800 2. Make sure the volume is stopped and there is no
pending heal before you enable the feature.

Not even sure if I can test what it's meant to improve on my lackluster dev
setup.

>
>
> --
> Lindsay Mathieson
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.gluster.org/pipermail/gluster-users/attachments/20160806/b9cef128/attachment.html>

But if you *do* decide to test the feature, I'd suggest that you do so with
3.8.2 (which is slated to be released on Aug 10) as it contains some
important bug fixes. :)

-Krutika

On Sun, Aug 7, 2016 at 8:39 AM, David Gossage <dgossage at
carouselchecks.com>
wrote:
> On Sat, Aug 6, 2016 at 9:58 PM, Lindsay Mathieson <
> lindsay.mathieson at gmail.com> wrote:
>
>> On 7/08/2016 12:56 PM, David Gossage wrote:
>>
>>> My Dev server with one VM doing almost nothing handled update to
3.8.1
>>> and op-version update just fine.
>>>
>>
>> Good to know, thanks :)
>>
>>
>> turned on the new granular setting but haven't simulated any brick
>>> failures yet to see what happens.
>>>
>>>
>> is that the "cluster.locking-scheme: granular" one? its
available in
>> 3.7.12 as well, I've had it activate for a couple of weeks.
>
>
> Granular Entry self-heal for AFR
>
> *Notes for users:* This feature can be enabled using the command
>
> gluster volume set <vol-name> granular-entry-heal on
>
> *Limitations:* 1. The feature is not backward compatible. So please
> enable the option only after you have upgraded all your clients and servers
> to 3.8 and op-version is 30800 2. Make sure the volume is stopped and there
> is no pending heal before you enable the feature.
>
> Not even sure if I can test what it's meant to improve on my lackluster
> dev setup.
>
>
>>
>>
>> --
>> Lindsay Mathieson
>>
>>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.gluster.org/pipermail/gluster-users/attachments/20160808/12080b9f/attachment.html>