Hi,
I have installed Gluster 3.6.8 on our cluster and have created a gluster
volume with bricks from several unused disk chunks from different nodes
which run Suse 11 (SLES 11SP3 x86_64). I ran some test and everything seems
to work fine on the cluster, ie. could read from and write to the gluster
volume. However when I tried to install gluster on different workstations,
all runing OpenSuse 12.3, I have failed completely. I tried different
gluster versions (3.7, 3.6, 3.5,.), trying to satisfy the required
dependencies in every case, but, despite the installation process seemed to
complete without problems in many cases, gluster did not work on the
workstations. Depending on the version installed, I got a segmentation fault
when running the command "gluster", or I got the gluster prompt but
then it
was inoperative (it did not do anything with any command other than
"help").
In some cases I found that the gluster daemond could not start or, more
probably, that it started and stopped right away. For example with the most
recent version (gluster 3.7.6), when I ran the command
/usr/local/sbin/gluterd -l gluster.log
these were the contents of gluster.log:
[2016-01-15 16:23:24.663512] I [MSGID: 100030] [glusterfsd.c:2318:main]
0-/usr/local/sbin/glusterd: Started running /usr/local/sbin/glusterd version
3.7.6 (args: /usr/local/sbin/glusterd -l gluster.log)
[2016-01-15 16:23:24.666710] I [MSGID: 106478] [glusterd.c:1350:init]
0-management: Maximum allowed open file descriptors set to 65536
[2016-01-15 16:23:24.666761] I [MSGID: 106479] [glusterd.c:1399:init]
0-management: Using /var/lib/glusterd as working directory
[2016-01-15 16:23:24.670374] E [socket.c:769:__socket_server_bind]
0-socket.management: binding to failed: Address is already in use
[2016-01-15 16:23:24.670388] E [socket.c:772:__socket_server_bind]
0-socket.management: Port is already in use
[2016-01-15 16:23:24.670399] W [rpcsvc.c:1604:rpcsvc_transport_create]
0-rpc-service: listening on transport failed
[2016-01-15 16:23:24.670408] E [MSGID: 106243] [glusterd.c:1616:init]
0-management: creation of listener failed
[2016-01-15 16:23:24.670416] E [MSGID: 101019] [xlator.c:428:xlator_init]
0-management: Initialization of volume 'management' failed, review your
volfile again
[2016-01-15 16:23:24.670422] E [graph.c:322:glusterfs_graph_init]
0-management: initializing translator failed
[2016-01-15 16:23:24.670427] E [graph.c:661:glusterfs_graph_activate]
0-graph: init failed
[2016-01-15 16:23:24.670586] W [glusterfsd.c:1236:cleanup_and_exit]
(-->/usr/local/sbin/glusterd(glusterfs_volumes_init+0xc2) [0x409242]
-->/usr/local/sbin/glusterd(glusterfs_process_volfp+0x116) [0x409136]
-->/usr/local/sbin/glusterd(cleanup_and_exit+0x65) [0x408805] ) 0-: received
signum (0), shutting down
If there is anybody who has been able to install gluster on OpenSuse 12.3
and make it work, I would appreciate any suggestions.
Regards,
Jordi
----------------------------------------------------------------------------
----------
Jordi Bujons, PhD
Dept. of Biological Chemistry and Molecular Modeling (QBMM)
Institute of Advanced Chemistry of Catalonia (IQAC)
National Research Council of Spain (CSIC)
Address: Jordi Girona 18-26, 08034 Barcelona, Spain
Phone: +34 934006100 ext. 1291
FAX: +34 932045904
<mailto:jordi.bujons at iqac.csic.es> jordi.bujons at iqac.csic.es
<mailto:jbujons1 at gmail.com> jbujons1 at gmail.com
<http://www.iqac.csic.es/> http://www.iqac.csic.es
----------------------------------------------------------------------------
----------
---
El software de antivirus Avast ha analizado este correo electr?nico en busca de
virus.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.gluster.org/pipermail/gluster-users/attachments/20160115/8204a88f/attachment.html>