Kaleb Keithley
2015-Sep-22 10:47 UTC
[Gluster-users] Fwd: nfs-ganesha HA with arbiter volume
Hi, IIRC, the setup is two nodes gluster+ganesha nodes plus the arbiter node for gluster quorum. Have I remembered that correctly? The Ganesha HA in 3.7 requires a minimum of three servers running ganesha and pacemaker. Two might work if you change the ganesha-ha.sh to not enable pacemaker quorum, but I haven't tried that myself. I'll try and find time in the next couple of days to update the documentation or write a blog post. ----- Original Message ----> > > > On 21/09/15 21:21, Tiemen Ruiten wrote: > > Whoops, replied off-list. > > > > Additionally I noticed that the generated corosync config is not > > valid, as there is no interface section: > > > > /etc/corosync/corosync.conf > > > > totem { > > version: 2 > > secauth: off > > cluster_name: rd-ganesha-ha > > transport: udpu > > } > > > > nodelist { > > node { > > ring0_addr: cobalt > > nodeid: 1 > > } > > node { > > ring0_addr: iron > > nodeid: 2 > > } > > } > > > > quorum { > > provider: corosync_votequorum > > two_node: 1 > > } > > > > logging { > > to_syslog: yes > > } > > > > > > > > May be Kaleb can help you out. > > > > ---------- Forwarded message ---------- > > From: *Tiemen Ruiten* <t.ruiten at rdmedia.com <mailto:t.ruiten at rdmedia.com>> > > Date: 21 September 2015 at 17:16 > > Subject: Re: [Gluster-users] nfs-ganesha HA with arbiter volume > > To: Jiffin Tony Thottan <jthottan at redhat.com <mailto:jthottan at redhat.com>> > > > > > > Could you point me to the latest documentation? I've been struggling > > to find something up-to-date. I believe I have all the prerequisites: > > > > - shared storage volume exists and is mounted > > - all nodes in hosts files > > - Gluster-NFS disabled > > - corosync, pacemaker and nfs-ganesha rpm's installed > > > > Anything I missed? > > > > Everything has been installed by RPM so is in the default locations: > > /usr/libexec/ganesha/ganesha-ha.sh > > /etc/ganesha/ganesha.conf (empty) > > /etc/ganesha/ganesha-ha.conf > > > > Looks fine for me. > > > After I started the pcsd service manually, nfs-ganesha could be > > enabled successfully, but there was no virtual IP present on the > > interfaces and looking at the system log, I noticed corosync failed to > > start: > > > > - on the host where I issued the gluster nfs-ganesha enable command: > > > > Sep 21 17:07:18 iron systemd: Starting NFS-Ganesha file server... > > Sep 21 17:07:19 iron systemd: Started NFS-Ganesha file server. > > Sep 21 17:07:19 iron rpc.statd[2409]: Received SM_UNMON_ALL request > > from iron.int.rdmedia.com <http://iron.int.rdmedia.com> while not > > monitoring any hosts > > Sep 21 17:07:20 iron systemd: Starting Corosync Cluster Engine... > > Sep 21 17:07:20 iron corosync[3426]: [MAIN ] Corosync Cluster Engine > > ('2.3.4'): started and ready to provide service. > > Sep 21 17:07:20 iron corosync[3426]: [MAIN ] Corosync built-in > > features: dbus systemd xmlconf snmp pie relro bindnow > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing transport > > (UDP/IP Unicast). > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing > > transmit/receive security (NSS) crypto: none hash: none > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] The network interface > > [10.100.30.38] is now up. > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > corosync configuration map access [0] > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cmap > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > corosync configuration service [1] > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cfg > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > corosync cluster closed process group service v1.01 [2] > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cpg > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > corosync profile loading service [4] > > Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Using quorum provider > > corosync_votequorum > > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > > members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > corosync vote quorum service v1.0 [5] > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: votequorum > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > corosync cluster quorum service v0.1 [3] > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: quorum > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member > > {10.100.30.38} > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member > > {10.100.30.37} > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership > > (10.100.30.38:104 <http://10.100.30.38:104>) was formed. Members joined: 1 > > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > > members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > > members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > > members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Members[1]: 1 > > Sep 21 17:07:20 iron corosync[3427]: [MAIN ] Completed service > > synchronization, ready to provide service. > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership > > (10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members joined: 1 > > Sep 21 17:08:21 iron corosync: Starting Corosync Cluster Engine > > (corosync): [FAILED] > > Sep 21 17:08:21 iron systemd: corosync.service: control process > > exited, code=exited status=1 > > Sep 21 17:08:21 iron systemd: Failed to start Corosync Cluster Engine. > > Sep 21 17:08:21 iron systemd: Unit corosync.service entered failed state. > > > > > > - on the other host: > > > > Sep 21 17:07:19 cobalt systemd: Starting Preprocess NFS configuration... > > Sep 21 17:07:19 cobalt systemd: Starting RPC Port Mapper. > > Sep 21 17:07:19 cobalt systemd: Reached target RPC Port Mapper. > > Sep 21 17:07:19 cobalt systemd: Starting Host and Network Name Lookups. > > Sep 21 17:07:19 cobalt systemd: Reached target Host and Network Name > > Lookups. > > Sep 21 17:07:19 cobalt systemd: Starting RPC bind service... > > Sep 21 17:07:19 cobalt systemd: Started Preprocess NFS configuration. > > Sep 21 17:07:19 cobalt systemd: Started RPC bind service. > > Sep 21 17:07:19 cobalt systemd: Starting NFS status monitor for > > NFSv2/3 locking.... > > Sep 21 17:07:19 cobalt rpc.statd[2662]: Version 1.3.0 starting > > Sep 21 17:07:19 cobalt rpc.statd[2662]: Flags: TI-RPC > > Sep 21 17:07:19 cobalt systemd: Started NFS status monitor for NFSv2/3 > > locking.. > > Sep 21 17:07:19 cobalt systemd: Starting NFS-Ganesha file server... > > Sep 21 17:07:19 cobalt systemd: Started NFS-Ganesha file server. > > Sep 21 17:07:19 cobalt kernel: warning: `ganesha.nfsd' uses 32-bit > > capabilities (legacy support in use) > > Sep 21 17:07:19 cobalt logger: setting up rd-ganesha-ha > > Sep 21 17:07:19 cobalt rpc.statd[2662]: Received SM_UNMON_ALL request > > from cobalt.int.rdmedia.com <http://cobalt.int.rdmedia.com> while not > > monitoring any hosts > > Sep 21 17:07:19 cobalt logger: setting up cluster rd-ganesha-ha with > > the following cobalt iron > > Sep 21 17:07:20 cobalt systemd: Stopped Pacemaker High Availability > > Cluster Manager. > > Sep 21 17:07:20 cobalt systemd: Stopped Corosync Cluster Engine. > > Sep 21 17:07:20 cobalt systemd: Reloading. > > Sep 21 17:07:20 cobalt systemd: > > [/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue > > 'RemoveOnStop' in section 'Socket' > > Sep 21 17:07:20 cobalt systemd: > > [/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue > > 'RemoveOnStop' in section 'Socket' > > Sep 21 17:07:20 cobalt systemd: Reloading. > > Sep 21 17:07:20 cobalt systemd: > > [/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue > > 'RemoveOnStop' in section 'Socket' > > Sep 21 17:07:20 cobalt systemd: > > [/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue > > 'RemoveOnStop' in section 'Socket' > > Sep 21 17:07:20 cobalt systemd: Starting Corosync Cluster Engine... > > Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ] Corosync Cluster > > Engine ('2.3.4'): started and ready to provide service. > > Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ] Corosync built-in > > features: dbus systemd xmlconf snmp pie relro bindnow > > Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing transport > > (UDP/IP Unicast). > > Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing > > transmit/receive security (NSS) crypto: none hash: none > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] The network interface > > [10.100.30.37] is now up. > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > corosync configuration map access [0] > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cmap > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > corosync configuration service [1] > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cfg > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > corosync cluster closed process group service v1.01 [2] > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cpg > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > corosync profile loading service [4] > > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Using quorum provider > > corosync_votequorum > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > cluster members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > corosync vote quorum service v1.0 [5] > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: votequorum > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > corosync cluster quorum service v0.1 [3] > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: quorum > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member > > {10.100.30.37} > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member > > {10.100.30.38} > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership > > (10.100.30.37:100 <http://10.100.30.37:100>) was formed. Members joined: 1 > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > cluster members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > cluster members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > cluster members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1 > > Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ] Completed service > > synchronization, ready to provide service. > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership > > (10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members joined: 1 > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > cluster members. Current votes: 1 expected_votes: 2 > > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1 > > Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ] Completed service > > synchronization, ready to provide service. > > Sep 21 17:08:50 cobalt systemd: corosync.service operation timed out. > > Terminating. > > Sep 21 17:08:50 cobalt corosync: Starting Corosync Cluster Engine > > (corosync): > > Sep 21 17:08:50 cobalt systemd: Failed to start Corosync Cluster Engine. > > Sep 21 17:08:50 cobalt systemd: Unit corosync.service entered failed > > state. > > Sep 21 17:08:55 cobalt logger: warning: pcs property set > > no-quorum-policy=ignore failed > > Sep 21 17:08:55 cobalt logger: warning: pcs property set > > stonith-enabled=false failed > > Sep 21 17:08:55 cobalt logger: warning: pcs resource create nfs_start > > ganesha_nfsd ha_vol_mnt=/var/run/gluster/shared_storage --clone failed > > Sep 21 17:08:56 cobalt logger: warning: pcs resource delete > > nfs_start-clone failed > > Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-mon > > ganesha_mon --clone failed > > Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-grace > > ganesha_grace --clone failed > > Sep 21 17:08:57 cobalt logger: warning pcs resource create > > cobalt-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op > > monitor interval=15s failed > > Sep 21 17:08:57 cobalt logger: warning: pcs resource create > > cobalt-trigger_ip-1 ocf:heartbeat:Dummy failed > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add > > cobalt-cluster_ip-1 with cobalt-trigger_ip-1 failed > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > > cobalt-trigger_ip-1 then nfs-grace-clone failed > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > > nfs-grace-clone then cobalt-cluster_ip-1 failed > > Sep 21 17:08:57 cobalt logger: warning pcs resource create > > iron-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor > > interval=15s failed > > Sep 21 17:08:57 cobalt logger: warning: pcs resource create > > iron-trigger_ip-1 ocf:heartbeat:Dummy failed > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add > > iron-cluster_ip-1 with iron-trigger_ip-1 failed > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > > iron-trigger_ip-1 then nfs-grace-clone failed > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint order > > nfs-grace-clone then iron-cluster_ip-1 failed > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > cobalt-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > cobalt-cluster_ip-1 prefers iron=1000 failed > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > cobalt-cluster_ip-1 prefers cobalt=2000 failed > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > iron-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > iron-cluster_ip-1 prefers cobalt=1000 failed > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > iron-cluster_ip-1 prefers iron=2000 failed > > Sep 21 17:08:58 cobalt logger: warning pcs cluster cib-push > > /tmp/tmp.nXTfyA1GMR failed > > Sep 21 17:08:58 cobalt logger: warning: scp ganesha-ha.conf to cobalt > > failed > > > > BTW, I'm using CentOS 7. There are multiple network interfaces on the > > servers, could that be a problem? > > > > > > > > > > On 21 September 2015 at 11:48, Jiffin Tony Thottan > > <jthottan at redhat.com <mailto:jthottan at redhat.com>> wrote: > > > > > > > > On 21/09/15 13:56, Tiemen Ruiten wrote: > >> Hello Soumya, Kaleb, list, > >> > >> This Friday I created the gluster_shared_storage volume manually, > >> I just tried it with the command you supplied, but both have the > >> same result: > >> > >> from etc-glusterfs-glusterd.vol.log on the node where I issued > >> the command: > >> > >> [2015-09-21 07:59:47.756845] I [MSGID: 106474] > >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha > >> host found Hostname is cobalt > >> [2015-09-21 07:59:48.071755] I [MSGID: 106474] > >> [glusterd-ganesha.c:349:is_ganesha_host] 0-management: ganesha > >> host found Hostname is cobalt > >> [2015-09-21 07:59:48.653879] E [MSGID: 106470] > >> [glusterd-ganesha.c:264:glusterd_op_set_ganesha] 0-management: > >> Initial NFS-Ganesha set up failed > > > > As far as what I understand from the logs, it called > > setup_cluser()[calls `ganesha-ha.sh` script ] but script failed. > > Can u please provide following details : > > -Location of ganesha.sh file?? > > -Location of ganesha-ha.conf, ganesha.conf files ? > > > > > > And also can u cross check whether all the prerequisites before HA > > setup satisfied ? > > > > -- > > With Regards, > > Jiffin > > > > > >> [2015-09-21 07:59:48.653912] E [MSGID: 106123] > >> [glusterd-syncop.c:1404:gd_commit_op_phase] 0-management: Commit > >> of operation 'Volume (null)' failed on localhost : Failed to set > >> up HA config for NFS-Ganesha. Please check the log file for details > >> [2015-09-21 07:59:45.402458] I [MSGID: 106006] > >> [glusterd-svc-mgmt.c:323:glusterd_svc_common_rpc_notify] > >> 0-management: nfs has disconnected from glusterd. > >> [2015-09-21 07:59:48.071578] I [MSGID: 106474] > >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha > >> host found Hostname is cobalt > >> > >> from etc-glusterfs-glusterd.vol.log on the other node: > >> > >> [2015-09-21 08:12:50.111877] E [MSGID: 106062] > >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: > >> Unable to acquire volname > >> [2015-09-21 08:14:50.548087] E [MSGID: 106062] > >> [glusterd-op-sm.c:3635:glusterd_op_ac_lock] 0-management: Unable > >> to acquire volname > >> [2015-09-21 08:14:50.654746] I [MSGID: 106132] > >> [glusterd-proc-mgmt.c:83:glusterd_proc_stop] 0-management: nfs > >> already stopped > >> [2015-09-21 08:14:50.655095] I [MSGID: 106474] > >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha > >> host found Hostname is cobalt > >> [2015-09-21 08:14:51.287156] E [MSGID: 106062] > >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: > >> Unable to acquire volname > >> > >> > >> from etc-glusterfs-glusterd.vol.log on the arbiter node: > >> > >> [2015-09-21 08:18:50.934713] E [MSGID: 101075] > >> [common-utils.c:3127:gf_is_local_addr] 0-management: error in > >> getaddrinfo: Name or service not known > >> [2015-09-21 08:18:51.504694] E [MSGID: 106062] > >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: > >> Unable to acquire volname > >> > >> I have put the hostnames of all servers in my /etc/hosts file, > >> including the arbiter node. > >> > >> > >> On 18 September 2015 at 16:52, Soumya Koduri <skoduri at redhat.com > >> <mailto:skoduri at redhat.com>> wrote: > >> > >> Hi Tiemen, > >> > >> One of the pre-requisites before setting up nfs-ganesha HA is > >> to create and mount shared_storage volume. Use below CLI for that > >> > >> "gluster volume set all cluster.enable-shared-storage enable" > >> > >> It shall create the volume and mount in all the nodes > >> (including the arbiter node). Note this volume shall be > >> mounted on all the nodes of the gluster storage pool (though > >> in this case it may not be part of nfs-ganesha cluster). > >> > >> So instead of manually creating those directory paths, please > >> use above CLI and try re-configuring the setup. > >> > >> Thanks, > >> Soumya > >> > >> On 09/18/2015 07:29 PM, Tiemen Ruiten wrote: > >> > >> Hello Kaleb, > >> > >> I don't: > >> > >> # Name of the HA cluster created. > >> # must be unique within the subnet > >> HA_NAME="rd-ganesha-ha" > >> # > >> # The gluster server from which to mount the shared data > >> volume. > >> HA_VOL_SERVER="iron" > >> # > >> # N.B. you may use short names or long names; you may not > >> use IP addrs. > >> # Once you select one, stay with it as it will be mildly > >> unpleasant to > >> # clean up if you switch later on. Ensure that all names > >> - short and/or > >> # long - are in DNS or /etc/hosts on all machines in the > >> cluster. > >> # > >> # The subset of nodes of the Gluster Trusted Pool that > >> form the ganesha > >> # HA cluster. Hostname is specified. > >> HA_CLUSTER_NODES="cobalt,iron" > >> #HA_CLUSTER_NODES="server1.lab.redhat.com > >> <http://server1.lab.redhat.com> > >> <http://server1.lab.redhat.com>,server2.lab.redhat.com > >> <http://server2.lab.redhat.com> > >> <http://server2.lab.redhat.com>,..." > >> # > >> # Virtual IPs for each of the nodes specified above. > >> VIP_server1="10.100.30.101" > >> VIP_server2="10.100.30.102" > >> #VIP_server1_lab_redhat_com="10.0.2.1" > >> #VIP_server2_lab_redhat_com="10.0.2.2" > >> > >> hosts cobalt & iron are the data nodes, the arbiter > >> ip/hostname (neon) > >> isn't mentioned anywhere in this config file. > >> > >> > >> On 18 September 2015 at 15:56, Kaleb S. KEITHLEY > >> <kkeithle at redhat.com <mailto:kkeithle at redhat.com> > >> <mailto:kkeithle at redhat.com > >> <mailto:kkeithle at redhat.com>>> wrote: > >> > >> On 09/18/2015 09:46 AM, Tiemen Ruiten wrote: > >> > Hello, > >> > > >> > I have a Gluster cluster with a single replica 3, > >> arbiter 1 volume (so > >> > two nodes with actual data, one arbiter node). I > >> would like to setup > >> > NFS-Ganesha HA for this volume but I'm having some > >> difficulties. > >> > > >> > - I needed to create a directory > >> /var/run/gluster/shared_storage > >> > manually on all nodes, or the command 'gluster > >> nfs-ganesha enable would > >> > fail with the following error: > >> > [2015-09-18 13:13:34.690416] E [MSGID: 106032] > >> > [glusterd-ganesha.c:708:pre_setup] 0-THIS->name: > >> mkdir() failed on path > >> > /var/run/gluster/shared_storage/nfs-ganesha, [No > >> such file or directory] > >> > > >> > - Then I found out that the command connects to the > >> arbiter node as > >> > well, but obviously I don't want to set up > >> NFS-Ganesha there. Is it > >> > actually possible to setup NFS-Ganesha HA with an > >> arbiter node? If it's > >> > possible, is there any documentation on how to do that? > >> > > >> > >> Please send the /etc/ganesha/ganesha-ha.conf file > >> you're using. > >> > >> Probably you have included the arbiter in your HA > >> config; that would be > >> a mistake. > >> > >> -- > >> > >> Kaleb > >> > >> > >> > >> > >> -- > >> Tiemen Ruiten > >> Systems Engineer > >> R&D Media > >> > >> > >> _______________________________________________ > >> Gluster-users mailing list > >> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > >> http://www.gluster.org/mailman/listinfo/gluster-users > >> > >> > >> > >> > >> -- > >> Tiemen Ruiten > >> Systems Engineer > >> R&D Media > >> > >> > >> _______________________________________________ > >> Gluster-users mailing list > >> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > >> http://www.gluster.org/mailman/listinfo/gluster-users > > > > > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > > http://www.gluster.org/mailman/listinfo/gluster-users > > > > > > > > > > -- > > Tiemen Ruiten > > Systems Engineer > > R&D Media > > > > > > > > -- > > Tiemen Ruiten > > Systems Engineer > > R&D Media > > > > > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org > > http://www.gluster.org/mailman/listinfo/gluster-users > >
Tiemen Ruiten
2015-Sep-22 11:36 UTC
[Gluster-users] Fwd: nfs-ganesha HA with arbiter volume
That's correct and my original question was actually if a two node + arbiter setup is possible. The documentation provided by Soumya only mentions two servers in the example ganesha-ha.sh script. Perhaps that could be updated as well then, to not give the wrong impression. I could try to change the script to disable quorum, but wouldn't that defeat the purpose? What will happen in case one node goes down unexpectedly? On 22 September 2015 at 12:47, Kaleb Keithley <kkeithle at redhat.com> wrote:> > Hi, > > IIRC, the setup is two nodes gluster+ganesha nodes plus the arbiter node > for gluster quorum. > > Have I remembered that correctly? > > The Ganesha HA in 3.7 requires a minimum of three servers running ganesha > and pacemaker. Two might work if you change the ganesha-ha.sh to not enable > pacemaker quorum, but I haven't tried that myself. I'll try and find time > in the next couple of days to update the documentation or write a blog post. > > > > ----- Original Message ---- > > > > > > > > On 21/09/15 21:21, Tiemen Ruiten wrote: > > > Whoops, replied off-list. > > > > > > Additionally I noticed that the generated corosync config is not > > > valid, as there is no interface section: > > > > > > /etc/corosync/corosync.conf > > > > > > totem { > > > version: 2 > > > secauth: off > > > cluster_name: rd-ganesha-ha > > > transport: udpu > > > } > > > > > > nodelist { > > > node { > > > ring0_addr: cobalt > > > nodeid: 1 > > > } > > > node { > > > ring0_addr: iron > > > nodeid: 2 > > > } > > > } > > > > > > quorum { > > > provider: corosync_votequorum > > > two_node: 1 > > > } > > > > > > logging { > > > to_syslog: yes > > > } > > > > > > > > > > > > > May be Kaleb can help you out. > > > > > > ---------- Forwarded message ---------- > > > From: *Tiemen Ruiten* <t.ruiten at rdmedia.com <mailto: > t.ruiten at rdmedia.com>> > > > Date: 21 September 2015 at 17:16 > > > Subject: Re: [Gluster-users] nfs-ganesha HA with arbiter volume > > > To: Jiffin Tony Thottan <jthottan at redhat.com <mailto: > jthottan at redhat.com>> > > > > > > > > > Could you point me to the latest documentation? I've been struggling > > > to find something up-to-date. I believe I have all the prerequisites: > > > > > > - shared storage volume exists and is mounted > > > - all nodes in hosts files > > > - Gluster-NFS disabled > > > - corosync, pacemaker and nfs-ganesha rpm's installed > > > > > > Anything I missed? > > > > > > Everything has been installed by RPM so is in the default locations: > > > /usr/libexec/ganesha/ganesha-ha.sh > > > /etc/ganesha/ganesha.conf (empty) > > > /etc/ganesha/ganesha-ha.conf > > > > > > > Looks fine for me. > > > > > After I started the pcsd service manually, nfs-ganesha could be > > > enabled successfully, but there was no virtual IP present on the > > > interfaces and looking at the system log, I noticed corosync failed to > > > start: > > > > > > - on the host where I issued the gluster nfs-ganesha enable command: > > > > > > Sep 21 17:07:18 iron systemd: Starting NFS-Ganesha file server... > > > Sep 21 17:07:19 iron systemd: Started NFS-Ganesha file server. > > > Sep 21 17:07:19 iron rpc.statd[2409]: Received SM_UNMON_ALL request > > > from iron.int.rdmedia.com <http://iron.int.rdmedia.com> while not > > > monitoring any hosts > > > Sep 21 17:07:20 iron systemd: Starting Corosync Cluster Engine... > > > Sep 21 17:07:20 iron corosync[3426]: [MAIN ] Corosync Cluster Engine > > > ('2.3.4'): started and ready to provide service. > > > Sep 21 17:07:20 iron corosync[3426]: [MAIN ] Corosync built-in > > > features: dbus systemd xmlconf snmp pie relro bindnow > > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing transport > > > (UDP/IP Unicast). > > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing > > > transmit/receive security (NSS) crypto: none hash: none > > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] The network interface > > > [10.100.30.38] is now up. > > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > > corosync configuration map access [0] > > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cmap > > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > > corosync configuration service [1] > > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cfg > > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > > corosync cluster closed process group service v1.01 [2] > > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cpg > > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > > corosync profile loading service [4] > > > Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Using quorum provider > > > corosync_votequorum > > > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > > > members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > > corosync vote quorum service v1.0 [5] > > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: votequorum > > > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > > > corosync cluster quorum service v0.1 [3] > > > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: quorum > > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member > > > {10.100.30.38} > > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member > > > {10.100.30.37} > > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership > > > (10.100.30.38:104 <http://10.100.30.38:104>) was formed. Members > joined: 1 > > > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > > > members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > > > members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > > > members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Members[1]: 1 > > > Sep 21 17:07:20 iron corosync[3427]: [MAIN ] Completed service > > > synchronization, ready to provide service. > > > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership > > > (10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members > joined: 1 > > > Sep 21 17:08:21 iron corosync: Starting Corosync Cluster Engine > > > (corosync): [FAILED] > > > Sep 21 17:08:21 iron systemd: corosync.service: control process > > > exited, code=exited status=1 > > > Sep 21 17:08:21 iron systemd: Failed to start Corosync Cluster Engine. > > > Sep 21 17:08:21 iron systemd: Unit corosync.service entered failed > state. > > > > > > > > > - on the other host: > > > > > > Sep 21 17:07:19 cobalt systemd: Starting Preprocess NFS > configuration... > > > Sep 21 17:07:19 cobalt systemd: Starting RPC Port Mapper. > > > Sep 21 17:07:19 cobalt systemd: Reached target RPC Port Mapper. > > > Sep 21 17:07:19 cobalt systemd: Starting Host and Network Name Lookups. > > > Sep 21 17:07:19 cobalt systemd: Reached target Host and Network Name > > > Lookups. > > > Sep 21 17:07:19 cobalt systemd: Starting RPC bind service... > > > Sep 21 17:07:19 cobalt systemd: Started Preprocess NFS configuration. > > > Sep 21 17:07:19 cobalt systemd: Started RPC bind service. > > > Sep 21 17:07:19 cobalt systemd: Starting NFS status monitor for > > > NFSv2/3 locking.... > > > Sep 21 17:07:19 cobalt rpc.statd[2662]: Version 1.3.0 starting > > > Sep 21 17:07:19 cobalt rpc.statd[2662]: Flags: TI-RPC > > > Sep 21 17:07:19 cobalt systemd: Started NFS status monitor for NFSv2/3 > > > locking.. > > > Sep 21 17:07:19 cobalt systemd: Starting NFS-Ganesha file server... > > > Sep 21 17:07:19 cobalt systemd: Started NFS-Ganesha file server. > > > Sep 21 17:07:19 cobalt kernel: warning: `ganesha.nfsd' uses 32-bit > > > capabilities (legacy support in use) > > > Sep 21 17:07:19 cobalt logger: setting up rd-ganesha-ha > > > Sep 21 17:07:19 cobalt rpc.statd[2662]: Received SM_UNMON_ALL request > > > from cobalt.int.rdmedia.com <http://cobalt.int.rdmedia.com> while not > > > monitoring any hosts > > > Sep 21 17:07:19 cobalt logger: setting up cluster rd-ganesha-ha with > > > the following cobalt iron > > > Sep 21 17:07:20 cobalt systemd: Stopped Pacemaker High Availability > > > Cluster Manager. > > > Sep 21 17:07:20 cobalt systemd: Stopped Corosync Cluster Engine. > > > Sep 21 17:07:20 cobalt systemd: Reloading. > > > Sep 21 17:07:20 cobalt systemd: > > > [/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue > > > 'RemoveOnStop' in section 'Socket' > > > Sep 21 17:07:20 cobalt systemd: > > > [/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue > > > 'RemoveOnStop' in section 'Socket' > > > Sep 21 17:07:20 cobalt systemd: Reloading. > > > Sep 21 17:07:20 cobalt systemd: > > > [/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue > > > 'RemoveOnStop' in section 'Socket' > > > Sep 21 17:07:20 cobalt systemd: > > > [/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue > > > 'RemoveOnStop' in section 'Socket' > > > Sep 21 17:07:20 cobalt systemd: Starting Corosync Cluster Engine... > > > Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ] Corosync Cluster > > > Engine ('2.3.4'): started and ready to provide service. > > > Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ] Corosync built-in > > > features: dbus systemd xmlconf snmp pie relro bindnow > > > Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing transport > > > (UDP/IP Unicast). > > > Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing > > > transmit/receive security (NSS) crypto: none hash: none > > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] The network interface > > > [10.100.30.37] is now up. > > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > > corosync configuration map access [0] > > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cmap > > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > > corosync configuration service [1] > > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cfg > > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > > corosync cluster closed process group service v1.01 [2] > > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cpg > > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > > corosync profile loading service [4] > > > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Using quorum provider > > > corosync_votequorum > > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > > cluster members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > > corosync vote quorum service v1.0 [5] > > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: votequorum > > > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > > > corosync cluster quorum service v0.1 [3] > > > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: quorum > > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member > > > {10.100.30.37} > > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member > > > {10.100.30.38} > > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership > > > (10.100.30.37:100 <http://10.100.30.37:100>) was formed. Members > joined: 1 > > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > > cluster members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > > cluster members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > > cluster members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1 > > > Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ] Completed service > > > synchronization, ready to provide service. > > > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership > > > (10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members > joined: 1 > > > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > > > cluster members. Current votes: 1 expected_votes: 2 > > > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1 > > > Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ] Completed service > > > synchronization, ready to provide service. > > > Sep 21 17:08:50 cobalt systemd: corosync.service operation timed out. > > > Terminating. > > > Sep 21 17:08:50 cobalt corosync: Starting Corosync Cluster Engine > > > (corosync): > > > Sep 21 17:08:50 cobalt systemd: Failed to start Corosync Cluster > Engine. > > > Sep 21 17:08:50 cobalt systemd: Unit corosync.service entered failed > > > state. > > > Sep 21 17:08:55 cobalt logger: warning: pcs property set > > > no-quorum-policy=ignore failed > > > Sep 21 17:08:55 cobalt logger: warning: pcs property set > > > stonith-enabled=false failed > > > Sep 21 17:08:55 cobalt logger: warning: pcs resource create nfs_start > > > ganesha_nfsd ha_vol_mnt=/var/run/gluster/shared_storage --clone failed > > > Sep 21 17:08:56 cobalt logger: warning: pcs resource delete > > > nfs_start-clone failed > > > Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-mon > > > ganesha_mon --clone failed > > > Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-grace > > > ganesha_grace --clone failed > > > Sep 21 17:08:57 cobalt logger: warning pcs resource create > > > cobalt-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op > > > monitor interval=15s failed > > > Sep 21 17:08:57 cobalt logger: warning: pcs resource create > > > cobalt-trigger_ip-1 ocf:heartbeat:Dummy failed > > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add > > > cobalt-cluster_ip-1 with cobalt-trigger_ip-1 failed > > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > > > cobalt-trigger_ip-1 then nfs-grace-clone failed > > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > > > nfs-grace-clone then cobalt-cluster_ip-1 failed > > > Sep 21 17:08:57 cobalt logger: warning pcs resource create > > > iron-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor > > > interval=15s failed > > > Sep 21 17:08:57 cobalt logger: warning: pcs resource create > > > iron-trigger_ip-1 ocf:heartbeat:Dummy failed > > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add > > > iron-cluster_ip-1 with iron-trigger_ip-1 failed > > > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > > > iron-trigger_ip-1 then nfs-grace-clone failed > > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint order > > > nfs-grace-clone then iron-cluster_ip-1 failed > > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > > cobalt-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed > > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > > cobalt-cluster_ip-1 prefers iron=1000 failed > > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > > cobalt-cluster_ip-1 prefers cobalt=2000 failed > > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > > iron-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed > > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > > iron-cluster_ip-1 prefers cobalt=1000 failed > > > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > > > iron-cluster_ip-1 prefers iron=2000 failed > > > Sep 21 17:08:58 cobalt logger: warning pcs cluster cib-push > > > /tmp/tmp.nXTfyA1GMR failed > > > Sep 21 17:08:58 cobalt logger: warning: scp ganesha-ha.conf to cobalt > > > failed > > > > > > BTW, I'm using CentOS 7. There are multiple network interfaces on the > > > servers, could that be a problem? > > > > > > > > > > > > > > > On 21 September 2015 at 11:48, Jiffin Tony Thottan > > > <jthottan at redhat.com <mailto:jthottan at redhat.com>> wrote: > > > > > > > > > > > > On 21/09/15 13:56, Tiemen Ruiten wrote: > > >> Hello Soumya, Kaleb, list, > > >> > > >> This Friday I created the gluster_shared_storage volume manually, > > >> I just tried it with the command you supplied, but both have the > > >> same result: > > >> > > >> from etc-glusterfs-glusterd.vol.log on the node where I issued > > >> the command: > > >> > > >> [2015-09-21 07:59:47.756845] I [MSGID: 106474] > > >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha > > >> host found Hostname is cobalt > > >> [2015-09-21 07:59:48.071755] I [MSGID: 106474] > > >> [glusterd-ganesha.c:349:is_ganesha_host] 0-management: ganesha > > >> host found Hostname is cobalt > > >> [2015-09-21 07:59:48.653879] E [MSGID: 106470] > > >> [glusterd-ganesha.c:264:glusterd_op_set_ganesha] 0-management: > > >> Initial NFS-Ganesha set up failed > > > > > > As far as what I understand from the logs, it called > > > setup_cluser()[calls `ganesha-ha.sh` script ] but script failed. > > > Can u please provide following details : > > > -Location of ganesha.sh file?? > > > -Location of ganesha-ha.conf, ganesha.conf files ? > > > > > > > > > And also can u cross check whether all the prerequisites before HA > > > setup satisfied ? > > > > > > -- > > > With Regards, > > > Jiffin > > > > > > > > >> [2015-09-21 07:59:48.653912] E [MSGID: 106123] > > >> [glusterd-syncop.c:1404:gd_commit_op_phase] 0-management: Commit > > >> of operation 'Volume (null)' failed on localhost : Failed to set > > >> up HA config for NFS-Ganesha. Please check the log file for > details > > >> [2015-09-21 07:59:45.402458] I [MSGID: 106006] > > >> [glusterd-svc-mgmt.c:323:glusterd_svc_common_rpc_notify] > > >> 0-management: nfs has disconnected from glusterd. > > >> [2015-09-21 07:59:48.071578] I [MSGID: 106474] > > >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha > > >> host found Hostname is cobalt > > >> > > >> from etc-glusterfs-glusterd.vol.log on the other node: > > >> > > >> [2015-09-21 08:12:50.111877] E [MSGID: 106062] > > >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: > > >> Unable to acquire volname > > >> [2015-09-21 08:14:50.548087] E [MSGID: 106062] > > >> [glusterd-op-sm.c:3635:glusterd_op_ac_lock] 0-management: Unable > > >> to acquire volname > > >> [2015-09-21 08:14:50.654746] I [MSGID: 106132] > > >> [glusterd-proc-mgmt.c:83:glusterd_proc_stop] 0-management: nfs > > >> already stopped > > >> [2015-09-21 08:14:50.655095] I [MSGID: 106474] > > >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha > > >> host found Hostname is cobalt > > >> [2015-09-21 08:14:51.287156] E [MSGID: 106062] > > >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: > > >> Unable to acquire volname > > >> > > >> > > >> from etc-glusterfs-glusterd.vol.log on the arbiter node: > > >> > > >> [2015-09-21 08:18:50.934713] E [MSGID: 101075] > > >> [common-utils.c:3127:gf_is_local_addr] 0-management: error in > > >> getaddrinfo: Name or service not known > > >> [2015-09-21 08:18:51.504694] E [MSGID: 106062] > > >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: > > >> Unable to acquire volname > > >> > > >> I have put the hostnames of all servers in my /etc/hosts file, > > >> including the arbiter node. > > >> > > >> > > >> On 18 September 2015 at 16:52, Soumya Koduri <skoduri at redhat.com > > >> <mailto:skoduri at redhat.com>> wrote: > > >> > > >> Hi Tiemen, > > >> > > >> One of the pre-requisites before setting up nfs-ganesha HA is > > >> to create and mount shared_storage volume. Use below CLI for > that > > >> > > >> "gluster volume set all cluster.enable-shared-storage enable" > > >> > > >> It shall create the volume and mount in all the nodes > > >> (including the arbiter node). Note this volume shall be > > >> mounted on all the nodes of the gluster storage pool (though > > >> in this case it may not be part of nfs-ganesha cluster). > > >> > > >> So instead of manually creating those directory paths, please > > >> use above CLI and try re-configuring the setup. > > >> > > >> Thanks, > > >> Soumya > > >> > > >> On 09/18/2015 07:29 PM, Tiemen Ruiten wrote: > > >> > > >> Hello Kaleb, > > >> > > >> I don't: > > >> > > >> # Name of the HA cluster created. > > >> # must be unique within the subnet > > >> HA_NAME="rd-ganesha-ha" > > >> # > > >> # The gluster server from which to mount the shared data > > >> volume. > > >> HA_VOL_SERVER="iron" > > >> # > > >> # N.B. you may use short names or long names; you may not > > >> use IP addrs. > > >> # Once you select one, stay with it as it will be mildly > > >> unpleasant to > > >> # clean up if you switch later on. Ensure that all names > > >> - short and/or > > >> # long - are in DNS or /etc/hosts on all machines in the > > >> cluster. > > >> # > > >> # The subset of nodes of the Gluster Trusted Pool that > > >> form the ganesha > > >> # HA cluster. Hostname is specified. > > >> HA_CLUSTER_NODES="cobalt,iron" > > >> #HA_CLUSTER_NODES="server1.lab.redhat.com > > >> <http://server1.lab.redhat.com> > > >> <http://server1.lab.redhat.com>,server2.lab.redhat.com > > >> <http://server2.lab.redhat.com> > > >> <http://server2.lab.redhat.com>,..." > > >> # > > >> # Virtual IPs for each of the nodes specified above. > > >> VIP_server1="10.100.30.101" > > >> VIP_server2="10.100.30.102" > > >> #VIP_server1_lab_redhat_com="10.0.2.1" > > >> #VIP_server2_lab_redhat_com="10.0.2.2" > > >> > > >> hosts cobalt & iron are the data nodes, the arbiter > > >> ip/hostname (neon) > > >> isn't mentioned anywhere in this config file. > > >> > > >> > > >> On 18 September 2015 at 15:56, Kaleb S. KEITHLEY > > >> <kkeithle at redhat.com <mailto:kkeithle at redhat.com> > > >> <mailto:kkeithle at redhat.com > > >> <mailto:kkeithle at redhat.com>>> wrote: > > >> > > >> On 09/18/2015 09:46 AM, Tiemen Ruiten wrote: > > >> > Hello, > > >> > > > >> > I have a Gluster cluster with a single replica 3, > > >> arbiter 1 volume (so > > >> > two nodes with actual data, one arbiter node). I > > >> would like to setup > > >> > NFS-Ganesha HA for this volume but I'm having some > > >> difficulties. > > >> > > > >> > - I needed to create a directory > > >> /var/run/gluster/shared_storage > > >> > manually on all nodes, or the command 'gluster > > >> nfs-ganesha enable would > > >> > fail with the following error: > > >> > [2015-09-18 13:13:34.690416] E [MSGID: 106032] > > >> > [glusterd-ganesha.c:708:pre_setup] 0-THIS->name: > > >> mkdir() failed on path > > >> > /var/run/gluster/shared_storage/nfs-ganesha, [No > > >> such file or directory] > > >> > > > >> > - Then I found out that the command connects to the > > >> arbiter node as > > >> > well, but obviously I don't want to set up > > >> NFS-Ganesha there. Is it > > >> > actually possible to setup NFS-Ganesha HA with an > > >> arbiter node? If it's > > >> > possible, is there any documentation on how to do > that? > > >> > > > >> > > >> Please send the /etc/ganesha/ganesha-ha.conf file > > >> you're using. > > >> > > >> Probably you have included the arbiter in your HA > > >> config; that would be > > >> a mistake. > > >> > > >> -- > > >> > > >> Kaleb > > >> > > >> > > >> > > >> > > >> -- > > >> Tiemen Ruiten > > >> Systems Engineer > > >> R&D Media > > >> > > >> > > >> _______________________________________________ > > >> Gluster-users mailing list > > >> Gluster-users at gluster.org <mailto: > Gluster-users at gluster.org> > > >> http://www.gluster.org/mailman/listinfo/gluster-users > > >> > > >> > > >> > > >> > > >> -- > > >> Tiemen Ruiten > > >> Systems Engineer > > >> R&D Media > > >> > > >> > > >> _______________________________________________ > > >> Gluster-users mailing list > > >> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > > >> http://www.gluster.org/mailman/listinfo/gluster-users > > > > > > > > > _______________________________________________ > > > Gluster-users mailing list > > > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > > > http://www.gluster.org/mailman/listinfo/gluster-users > > > > > > > > > > > > > > > -- > > > Tiemen Ruiten > > > Systems Engineer > > > R&D Media > > > > > > > > > > > > -- > > > Tiemen Ruiten > > > Systems Engineer > > > R&D Media > > > > > > > > > _______________________________________________ > > > Gluster-users mailing list > > > Gluster-users at gluster.org > > > http://www.gluster.org/mailman/listinfo/gluster-users > > > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://www.gluster.org/mailman/listinfo/gluster-users >-- Tiemen Ruiten Systems Engineer R&D Media -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20150922/7ced304c/attachment.html>