Tiemen Ruiten
2015-Sep-21 15:51 UTC
[Gluster-users] Fwd: nfs-ganesha HA with arbiter volume
Whoops, replied off-list.
Additionally I noticed that the generated corosync config is not valid, as
there is no interface section:
/etc/corosync/corosync.conf
totem {
version: 2
secauth: off
cluster_name: rd-ganesha-ha
transport: udpu
}
nodelist {
node {
ring0_addr: cobalt
nodeid: 1
}
node {
ring0_addr: iron
nodeid: 2
}
}
quorum {
provider: corosync_votequorum
two_node: 1
}
logging {
to_syslog: yes
}
---------- Forwarded message ----------
From: Tiemen Ruiten <t.ruiten at rdmedia.com>
Date: 21 September 2015 at 17:16
Subject: Re: [Gluster-users] nfs-ganesha HA with arbiter volume
To: Jiffin Tony Thottan <jthottan at redhat.com>
Could you point me to the latest documentation? I've been struggling to
find something up-to-date. I believe I have all the prerequisites:
- shared storage volume exists and is mounted
- all nodes in hosts files
- Gluster-NFS disabled
- corosync, pacemaker and nfs-ganesha rpm's installed
Anything I missed?
Everything has been installed by RPM so is in the default locations:
/usr/libexec/ganesha/ganesha-ha.sh
/etc/ganesha/ganesha.conf (empty)
/etc/ganesha/ganesha-ha.conf
After I started the pcsd service manually, nfs-ganesha could be enabled
successfully, but there was no virtual IP present on the interfaces and
looking at the system log, I noticed corosync failed to start:
- on the host where I issued the gluster nfs-ganesha enable command:
Sep 21 17:07:18 iron systemd: Starting NFS-Ganesha file server...
Sep 21 17:07:19 iron systemd: Started NFS-Ganesha file server.
Sep 21 17:07:19 iron rpc.statd[2409]: Received SM_UNMON_ALL request from
iron.int.rdmedia.com while not monitoring any hosts
Sep 21 17:07:20 iron systemd: Starting Corosync Cluster Engine...
Sep 21 17:07:20 iron corosync[3426]: [MAIN ] Corosync Cluster Engine
('2.3.4'): started and ready to provide service.
Sep 21 17:07:20 iron corosync[3426]: [MAIN ] Corosync built-in features:
dbus systemd xmlconf snmp pie relro bindnow
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing transport
(UDP/IP Unicast).
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing transmit/receive
security (NSS) crypto: none hash: none
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] The network interface
[10.100.30.38] is now up.
Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded:
corosync configuration map access [0]
Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cmap
Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded:
corosync configuration service [1]
Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cfg
Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded:
corosync cluster closed process group service v1.01 [2]
Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cpg
Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded:
corosync profile loading service [4]
Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Using quorum provider
corosync_votequorum
Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded:
corosync vote quorum service v1.0 [5]
Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: votequorum
Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded:
corosync cluster quorum service v0.1 [3]
Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: quorum
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member
{10.100.30.38}
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member
{10.100.30.37}
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership (
10.100.30.38:104) was formed. Members joined: 1
Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Members[1]: 1
Sep 21 17:07:20 iron corosync[3427]: [MAIN ] Completed service
synchronization, ready to provide service.
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership (
10.100.30.37:108) was formed. Members joined: 1
Sep 21 17:08:21 iron corosync: Starting Corosync Cluster Engine (corosync):
[FAILED]
Sep 21 17:08:21 iron systemd: corosync.service: control process exited,
code=exited status=1
Sep 21 17:08:21 iron systemd: Failed to start Corosync Cluster Engine.
Sep 21 17:08:21 iron systemd: Unit corosync.service entered failed state.
- on the other host:
Sep 21 17:07:19 cobalt systemd: Starting Preprocess NFS configuration...
Sep 21 17:07:19 cobalt systemd: Starting RPC Port Mapper.
Sep 21 17:07:19 cobalt systemd: Reached target RPC Port Mapper.
Sep 21 17:07:19 cobalt systemd: Starting Host and Network Name Lookups.
Sep 21 17:07:19 cobalt systemd: Reached target Host and Network Name
Lookups.
Sep 21 17:07:19 cobalt systemd: Starting RPC bind service...
Sep 21 17:07:19 cobalt systemd: Started Preprocess NFS configuration.
Sep 21 17:07:19 cobalt systemd: Started RPC bind service.
Sep 21 17:07:19 cobalt systemd: Starting NFS status monitor for NFSv2/3
locking....
Sep 21 17:07:19 cobalt rpc.statd[2662]: Version 1.3.0 starting
Sep 21 17:07:19 cobalt rpc.statd[2662]: Flags: TI-RPC
Sep 21 17:07:19 cobalt systemd: Started NFS status monitor for NFSv2/3
locking..
Sep 21 17:07:19 cobalt systemd: Starting NFS-Ganesha file server...
Sep 21 17:07:19 cobalt systemd: Started NFS-Ganesha file server.
Sep 21 17:07:19 cobalt kernel: warning: `ganesha.nfsd' uses 32-bit
capabilities (legacy support in use)
Sep 21 17:07:19 cobalt logger: setting up rd-ganesha-ha
Sep 21 17:07:19 cobalt rpc.statd[2662]: Received SM_UNMON_ALL request from
cobalt.int.rdmedia.com while not monitoring any hosts
Sep 21 17:07:19 cobalt logger: setting up cluster rd-ganesha-ha with the
following cobalt iron
Sep 21 17:07:20 cobalt systemd: Stopped Pacemaker High Availability Cluster
Manager.
Sep 21 17:07:20 cobalt systemd: Stopped Corosync Cluster Engine.
Sep 21 17:07:20 cobalt systemd: Reloading.
Sep 21 17:07:20 cobalt systemd:
[/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue
'RemoveOnStop'
in section 'Socket'
Sep 21 17:07:20 cobalt systemd:
[/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue
'RemoveOnStop' in section 'Socket'
Sep 21 17:07:20 cobalt systemd: Reloading.
Sep 21 17:07:20 cobalt systemd:
[/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue
'RemoveOnStop'
in section 'Socket'
Sep 21 17:07:20 cobalt systemd:
[/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue
'RemoveOnStop' in section 'Socket'
Sep 21 17:07:20 cobalt systemd: Starting Corosync Cluster Engine...
Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ] Corosync Cluster Engine
('2.3.4'): started and ready to provide service.
Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ] Corosync built-in features:
dbus systemd xmlconf snmp pie relro bindnow
Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing transport
(UDP/IP Unicast).
Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing
transmit/receive security (NSS) crypto: none hash: none
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] The network interface
[10.100.30.37] is now up.
Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded:
corosync configuration map access [0]
Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cmap
Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded:
corosync configuration service [1]
Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cfg
Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded:
corosync cluster closed process group service v1.01 [2]
Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cpg
Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded:
corosync profile loading service [4]
Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Using quorum provider
corosync_votequorum
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded:
corosync vote quorum service v1.0 [5]
Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: votequorum
Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded:
corosync cluster quorum service v0.1 [3]
Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: quorum
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member
{10.100.30.37}
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member
{10.100.30.38}
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership (
10.100.30.37:100) was formed. Members joined: 1
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1
Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ] Completed service
synchronization, ready to provide service.
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership (
10.100.30.37:108) was formed. Members joined: 1
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1
Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ] Completed service
synchronization, ready to provide service.
Sep 21 17:08:50 cobalt systemd: corosync.service operation timed out.
Terminating.
Sep 21 17:08:50 cobalt corosync: Starting Corosync Cluster Engine
(corosync):
Sep 21 17:08:50 cobalt systemd: Failed to start Corosync Cluster Engine.
Sep 21 17:08:50 cobalt systemd: Unit corosync.service entered failed state.
Sep 21 17:08:55 cobalt logger: warning: pcs property set
no-quorum-policy=ignore failed
Sep 21 17:08:55 cobalt logger: warning: pcs property set
stonith-enabled=false failed
Sep 21 17:08:55 cobalt logger: warning: pcs resource create nfs_start
ganesha_nfsd ha_vol_mnt=/var/run/gluster/shared_storage --clone failed
Sep 21 17:08:56 cobalt logger: warning: pcs resource delete nfs_start-clone
failed
Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-mon
ganesha_mon --clone failed
Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-grace
ganesha_grace --clone failed
Sep 21 17:08:57 cobalt logger: warning pcs resource create
cobalt-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor
interval=15s failed
Sep 21 17:08:57 cobalt logger: warning: pcs resource create
cobalt-trigger_ip-1 ocf:heartbeat:Dummy failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add
cobalt-cluster_ip-1 with cobalt-trigger_ip-1 failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint order
cobalt-trigger_ip-1 then nfs-grace-clone failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint order
nfs-grace-clone then cobalt-cluster_ip-1 failed
Sep 21 17:08:57 cobalt logger: warning pcs resource create
iron-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor
interval=15s failed
Sep 21 17:08:57 cobalt logger: warning: pcs resource create
iron-trigger_ip-1 ocf:heartbeat:Dummy failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add
iron-cluster_ip-1 with iron-trigger_ip-1 failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint order
iron-trigger_ip-1 then nfs-grace-clone failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint order
nfs-grace-clone then iron-cluster_ip-1 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
cobalt-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
cobalt-cluster_ip-1 prefers iron=1000 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
cobalt-cluster_ip-1 prefers cobalt=2000 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
iron-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
iron-cluster_ip-1 prefers cobalt=1000 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
iron-cluster_ip-1 prefers iron=2000 failed
Sep 21 17:08:58 cobalt logger: warning pcs cluster cib-push
/tmp/tmp.nXTfyA1GMR failed
Sep 21 17:08:58 cobalt logger: warning: scp ganesha-ha.conf to cobalt failed
BTW, I'm using CentOS 7. There are multiple network interfaces on the
servers, could that be a problem?
On 21 September 2015 at 11:48, Jiffin Tony Thottan <jthottan at
redhat.com>
wrote:
>
>
> On 21/09/15 13:56, Tiemen Ruiten wrote:
>
> Hello Soumya, Kaleb, list,
>
> This Friday I created the gluster_shared_storage volume manually, I just
> tried it with the command you supplied, but both have the same result:
>
> from etc-glusterfs-glusterd.vol.log on the node where I issued the command:
>
> [2015-09-21 07:59:47.756845] I [MSGID: 106474]
> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha host found
> Hostname is cobalt
> [2015-09-21 07:59:48.071755] I [MSGID: 106474]
> [glusterd-ganesha.c:349:is_ganesha_host] 0-management: ganesha host found
> Hostname is cobalt
> [2015-09-21 07:59:48.653879] E [MSGID: 106470]
> [glusterd-ganesha.c:264:glusterd_op_set_ganesha] 0-management: Initial
> NFS-Ganesha set up failed
>
>
> As far as what I understand from the logs, it called setup_cluser()[calls
> `ganesha-ha.sh` script ] but script failed.
> Can u please provide following details :
> -Location of ganesha.sh file??
> -Location of ganesha-ha.conf, ganesha.conf files ?
>
>
> And also can u cross check whether all the prerequisites before HA setup
> satisfied ?
>
> --
> With Regards,
> Jiffin
>
>
> [2015-09-21 07:59:48.653912] E [MSGID: 106123]
> [glusterd-syncop.c:1404:gd_commit_op_phase] 0-management: Commit of
> operation 'Volume (null)' failed on localhost : Failed to set up HA
config
> for NFS-Ganesha. Please check the log file for details
> [2015-09-21 07:59:45.402458] I [MSGID: 106006]
> [glusterd-svc-mgmt.c:323:glusterd_svc_common_rpc_notify] 0-management: nfs
> has disconnected from glusterd.
> [2015-09-21 07:59:48.071578] I [MSGID: 106474]
> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha host found
> Hostname is cobalt
>
> from etc-glusterfs-glusterd.vol.log on the other node:
>
> [2015-09-21 08:12:50.111877] E [MSGID: 106062]
> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable to
> acquire volname
> [2015-09-21 08:14:50.548087] E [MSGID: 106062]
> [glusterd-op-sm.c:3635:glusterd_op_ac_lock] 0-management: Unable to acquire
> volname
> [2015-09-21 08:14:50.654746] I [MSGID: 106132]
> [glusterd-proc-mgmt.c:83:glusterd_proc_stop] 0-management: nfs already
> stopped
> [2015-09-21 08:14:50.655095] I [MSGID: 106474]
> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha host found
> Hostname is cobalt
> [2015-09-21 08:14:51.287156] E [MSGID: 106062]
> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable to
> acquire volname
>
>
> from etc-glusterfs-glusterd.vol.log on the arbiter node:
>
> [2015-09-21 08:18:50.934713] E [MSGID: 101075]
> [common-utils.c:3127:gf_is_local_addr] 0-management: error in getaddrinfo:
> Name or service not known
> [2015-09-21 08:18:51.504694] E [MSGID: 106062]
> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable to
> acquire volname
>
> I have put the hostnames of all servers in my /etc/hosts file, including
> the arbiter node.
>
>
> On 18 September 2015 at 16:52, Soumya Koduri <skoduri at redhat.com>
wrote:
>
>> Hi Tiemen,
>>
>> One of the pre-requisites before setting up nfs-ganesha HA is to create
>> and mount shared_storage volume. Use below CLI for that
>>
>> "gluster volume set all cluster.enable-shared-storage enable"
>>
>> It shall create the volume and mount in all the nodes (including the
>> arbiter node). Note this volume shall be mounted on all the nodes of
the
>> gluster storage pool (though in this case it may not be part of
nfs-ganesha
>> cluster).
>>
>> So instead of manually creating those directory paths, please use above
>> CLI and try re-configuring the setup.
>>
>> Thanks,
>> Soumya
>>
>> On 09/18/2015 07:29 PM, Tiemen Ruiten wrote:
>>
>>> Hello Kaleb,
>>>
>>> I don't:
>>>
>>> # Name of the HA cluster created.
>>> # must be unique within the subnet
>>> HA_NAME="rd-ganesha-ha"
>>> #
>>> # The gluster server from which to mount the shared data volume.
>>> HA_VOL_SERVER="iron"
>>> #
>>> # N.B. you may use short names or long names; you may not use IP
addrs.
>>> # Once you select one, stay with it as it will be mildly unpleasant
to
>>> # clean up if you switch later on. Ensure that all names - short
and/or
>>> # long - are in DNS or /etc/hosts on all machines in the cluster.
>>> #
>>> # The subset of nodes of the Gluster Trusted Pool that form the
ganesha
>>> # HA cluster. Hostname is specified.
>>> HA_CLUSTER_NODES="cobalt,iron"
>>> #HA_CLUSTER_NODES="server1.lab.redhat.com
>>> <http://server1.lab.redhat.com>,server2.lab.redhat.com
>>> <http://server2.lab.redhat.com>,..."
>>> #
>>> # Virtual IPs for each of the nodes specified above.
>>> VIP_server1="10.100.30.101"
>>> VIP_server2="10.100.30.102"
>>> #VIP_server1_lab_redhat_com="10.0.2.1"
>>> #VIP_server2_lab_redhat_com="10.0.2.2"
>>>
>>> hosts cobalt & iron are the data nodes, the arbiter ip/hostname
(neon)
>>> isn't mentioned anywhere in this config file.
>>>
>>>
>>> On 18 September 2015 at 15:56, Kaleb S. KEITHLEY < <kkeithle
at redhat.com>
>>> kkeithle at redhat.com
>>> <mailto:kkeithle at redhat.com>> wrote:
>>>
>>> On 09/18/2015 09:46 AM, Tiemen Ruiten wrote:
>>> > Hello,
>>> >
>>> > I have a Gluster cluster with a single replica 3, arbiter
1 volume
>>> (so
>>> > two nodes with actual data, one arbiter node). I would
like to
>>> setup
>>> > NFS-Ganesha HA for this volume but I'm having some
difficulties.
>>> >
>>> > - I needed to create a directory
/var/run/gluster/shared_storage
>>> > manually on all nodes, or the command 'gluster
nfs-ganesha enable
>>> would
>>> > fail with the following error:
>>> > [2015-09-18 13:13:34.690416] E [MSGID: 106032]
>>> > [glusterd-ganesha.c:708:pre_setup] 0-THIS->name:
mkdir() failed on
>>> path
>>> > /var/run/gluster/shared_storage/nfs-ganesha, [No such file
or
>>> directory]
>>> >
>>> > - Then I found out that the command connects to the
arbiter node as
>>> > well, but obviously I don't want to set up NFS-Ganesha
there. Is it
>>> > actually possible to setup NFS-Ganesha HA with an arbiter
node? If
>>> it's
>>> > possible, is there any documentation on how to do that?
>>> >
>>>
>>> Please send the /etc/ganesha/ganesha-ha.conf file you're
using.
>>>
>>> Probably you have included the arbiter in your HA config; that
would
>>> be
>>> a mistake.
>>>
>>> --
>>>
>>> Kaleb
>>>
>>>
>>>
>>>
>>> --
>>> Tiemen Ruiten
>>> Systems Engineer
>>> R&D Media
>>>
>>>
>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>
>>>
>
>
> --
> Tiemen Ruiten
> Systems Engineer
> R&D Media
>
>
> _______________________________________________
> Gluster-users mailing listGluster-users at
gluster.orghttp://www.gluster.org/mailman/listinfo/gluster-users
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users
>
--
Tiemen Ruiten
Systems Engineer
R&D Media
--
Tiemen Ruiten
Systems Engineer
R&D Media
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.gluster.org/pipermail/gluster-users/attachments/20150921/60445e26/attachment.html>
Jiffin Tony Thottan
2015-Sep-22 06:15 UTC
[Gluster-users] Fwd: nfs-ganesha HA with arbiter volume
On 21/09/15 21:21, Tiemen Ruiten wrote:> Whoops, replied off-list. > > Additionally I noticed that the generated corosync config is not > valid, as there is no interface section: > > /etc/corosync/corosync.conf > > totem { > version: 2 > secauth: off > cluster_name: rd-ganesha-ha > transport: udpu > } > > nodelist { > node { > ring0_addr: cobalt > nodeid: 1 > } > node { > ring0_addr: iron > nodeid: 2 > } > } > > quorum { > provider: corosync_votequorum > two_node: 1 > } > > logging { > to_syslog: yes > } > > >May be Kaleb can help you out.> > ---------- Forwarded message ---------- > From: *Tiemen Ruiten* <t.ruiten at rdmedia.com <mailto:t.ruiten at rdmedia.com>> > Date: 21 September 2015 at 17:16 > Subject: Re: [Gluster-users] nfs-ganesha HA with arbiter volume > To: Jiffin Tony Thottan <jthottan at redhat.com <mailto:jthottan at redhat.com>> > > > Could you point me to the latest documentation? I've been struggling > to find something up-to-date. I believe I have all the prerequisites: > > - shared storage volume exists and is mounted > - all nodes in hosts files > - Gluster-NFS disabled > - corosync, pacemaker and nfs-ganesha rpm's installed > > Anything I missed? > > Everything has been installed by RPM so is in the default locations: > /usr/libexec/ganesha/ganesha-ha.sh > /etc/ganesha/ganesha.conf (empty) > /etc/ganesha/ganesha-ha.conf >Looks fine for me.> After I started the pcsd service manually, nfs-ganesha could be > enabled successfully, but there was no virtual IP present on the > interfaces and looking at the system log, I noticed corosync failed to > start: > > - on the host where I issued the gluster nfs-ganesha enable command: > > Sep 21 17:07:18 iron systemd: Starting NFS-Ganesha file server... > Sep 21 17:07:19 iron systemd: Started NFS-Ganesha file server. > Sep 21 17:07:19 iron rpc.statd[2409]: Received SM_UNMON_ALL request > from iron.int.rdmedia.com <http://iron.int.rdmedia.com> while not > monitoring any hosts > Sep 21 17:07:20 iron systemd: Starting Corosync Cluster Engine... > Sep 21 17:07:20 iron corosync[3426]: [MAIN ] Corosync Cluster Engine > ('2.3.4'): started and ready to provide service. > Sep 21 17:07:20 iron corosync[3426]: [MAIN ] Corosync built-in > features: dbus systemd xmlconf snmp pie relro bindnow > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing transport > (UDP/IP Unicast). > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing > transmit/receive security (NSS) crypto: none hash: none > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] The network interface > [10.100.30.38] is now up. > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > corosync configuration map access [0] > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cmap > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > corosync configuration service [1] > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cfg > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > corosync cluster closed process group service v1.01 [2] > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: cpg > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > corosync profile loading service [4] > Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Using quorum provider > corosync_votequorum > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > corosync vote quorum service v1.0 [5] > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: votequorum > Sep 21 17:07:20 iron corosync[3427]: [SERV ] Service engine loaded: > corosync cluster quorum service v0.1 [3] > Sep 21 17:07:20 iron corosync[3427]: [QB ] server name: quorum > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member > {10.100.30.38} > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member > {10.100.30.37} > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership > (10.100.30.38:104 <http://10.100.30.38:104>) was formed. Members joined: 1 > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Members[1]: 1 > Sep 21 17:07:20 iron corosync[3427]: [MAIN ] Completed service > synchronization, ready to provide service. > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership > (10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members joined: 1 > Sep 21 17:08:21 iron corosync: Starting Corosync Cluster Engine > (corosync): [FAILED] > Sep 21 17:08:21 iron systemd: corosync.service: control process > exited, code=exited status=1 > Sep 21 17:08:21 iron systemd: Failed to start Corosync Cluster Engine. > Sep 21 17:08:21 iron systemd: Unit corosync.service entered failed state. > > > - on the other host: > > Sep 21 17:07:19 cobalt systemd: Starting Preprocess NFS configuration... > Sep 21 17:07:19 cobalt systemd: Starting RPC Port Mapper. > Sep 21 17:07:19 cobalt systemd: Reached target RPC Port Mapper. > Sep 21 17:07:19 cobalt systemd: Starting Host and Network Name Lookups. > Sep 21 17:07:19 cobalt systemd: Reached target Host and Network Name > Lookups. > Sep 21 17:07:19 cobalt systemd: Starting RPC bind service... > Sep 21 17:07:19 cobalt systemd: Started Preprocess NFS configuration. > Sep 21 17:07:19 cobalt systemd: Started RPC bind service. > Sep 21 17:07:19 cobalt systemd: Starting NFS status monitor for > NFSv2/3 locking.... > Sep 21 17:07:19 cobalt rpc.statd[2662]: Version 1.3.0 starting > Sep 21 17:07:19 cobalt rpc.statd[2662]: Flags: TI-RPC > Sep 21 17:07:19 cobalt systemd: Started NFS status monitor for NFSv2/3 > locking.. > Sep 21 17:07:19 cobalt systemd: Starting NFS-Ganesha file server... > Sep 21 17:07:19 cobalt systemd: Started NFS-Ganesha file server. > Sep 21 17:07:19 cobalt kernel: warning: `ganesha.nfsd' uses 32-bit > capabilities (legacy support in use) > Sep 21 17:07:19 cobalt logger: setting up rd-ganesha-ha > Sep 21 17:07:19 cobalt rpc.statd[2662]: Received SM_UNMON_ALL request > from cobalt.int.rdmedia.com <http://cobalt.int.rdmedia.com> while not > monitoring any hosts > Sep 21 17:07:19 cobalt logger: setting up cluster rd-ganesha-ha with > the following cobalt iron > Sep 21 17:07:20 cobalt systemd: Stopped Pacemaker High Availability > Cluster Manager. > Sep 21 17:07:20 cobalt systemd: Stopped Corosync Cluster Engine. > Sep 21 17:07:20 cobalt systemd: Reloading. > Sep 21 17:07:20 cobalt systemd: > [/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue > 'RemoveOnStop' in section 'Socket' > Sep 21 17:07:20 cobalt systemd: > [/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue > 'RemoveOnStop' in section 'Socket' > Sep 21 17:07:20 cobalt systemd: Reloading. > Sep 21 17:07:20 cobalt systemd: > [/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue > 'RemoveOnStop' in section 'Socket' > Sep 21 17:07:20 cobalt systemd: > [/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue > 'RemoveOnStop' in section 'Socket' > Sep 21 17:07:20 cobalt systemd: Starting Corosync Cluster Engine... > Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ] Corosync Cluster > Engine ('2.3.4'): started and ready to provide service. > Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ] Corosync built-in > features: dbus systemd xmlconf snmp pie relro bindnow > Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing transport > (UDP/IP Unicast). > Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing > transmit/receive security (NSS) crypto: none hash: none > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] The network interface > [10.100.30.37] is now up. > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > corosync configuration map access [0] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cmap > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > corosync configuration service [1] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cfg > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > corosync cluster closed process group service v1.01 [2] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: cpg > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > corosync profile loading service [4] > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Using quorum provider > corosync_votequorum > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > cluster members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > corosync vote quorum service v1.0 [5] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: votequorum > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ] Service engine loaded: > corosync cluster quorum service v0.1 [3] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ] server name: quorum > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member > {10.100.30.37} > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member > {10.100.30.38} > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership > (10.100.30.37:100 <http://10.100.30.37:100>) was formed. Members joined: 1 > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > cluster members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > cluster members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > cluster members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1 > Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ] Completed service > synchronization, ready to provide service. > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership > (10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members joined: 1 > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all > cluster members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1 > Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ] Completed service > synchronization, ready to provide service. > Sep 21 17:08:50 cobalt systemd: corosync.service operation timed out. > Terminating. > Sep 21 17:08:50 cobalt corosync: Starting Corosync Cluster Engine > (corosync): > Sep 21 17:08:50 cobalt systemd: Failed to start Corosync Cluster Engine. > Sep 21 17:08:50 cobalt systemd: Unit corosync.service entered failed > state. > Sep 21 17:08:55 cobalt logger: warning: pcs property set > no-quorum-policy=ignore failed > Sep 21 17:08:55 cobalt logger: warning: pcs property set > stonith-enabled=false failed > Sep 21 17:08:55 cobalt logger: warning: pcs resource create nfs_start > ganesha_nfsd ha_vol_mnt=/var/run/gluster/shared_storage --clone failed > Sep 21 17:08:56 cobalt logger: warning: pcs resource delete > nfs_start-clone failed > Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-mon > ganesha_mon --clone failed > Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-grace > ganesha_grace --clone failed > Sep 21 17:08:57 cobalt logger: warning pcs resource create > cobalt-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op > monitor interval=15s failed > Sep 21 17:08:57 cobalt logger: warning: pcs resource create > cobalt-trigger_ip-1 ocf:heartbeat:Dummy failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add > cobalt-cluster_ip-1 with cobalt-trigger_ip-1 failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > cobalt-trigger_ip-1 then nfs-grace-clone failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > nfs-grace-clone then cobalt-cluster_ip-1 failed > Sep 21 17:08:57 cobalt logger: warning pcs resource create > iron-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor > interval=15s failed > Sep 21 17:08:57 cobalt logger: warning: pcs resource create > iron-trigger_ip-1 ocf:heartbeat:Dummy failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add > iron-cluster_ip-1 with iron-trigger_ip-1 failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > iron-trigger_ip-1 then nfs-grace-clone failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint order > nfs-grace-clone then iron-cluster_ip-1 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > cobalt-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > cobalt-cluster_ip-1 prefers iron=1000 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > cobalt-cluster_ip-1 prefers cobalt=2000 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > iron-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > iron-cluster_ip-1 prefers cobalt=1000 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > iron-cluster_ip-1 prefers iron=2000 failed > Sep 21 17:08:58 cobalt logger: warning pcs cluster cib-push > /tmp/tmp.nXTfyA1GMR failed > Sep 21 17:08:58 cobalt logger: warning: scp ganesha-ha.conf to cobalt > failed > > BTW, I'm using CentOS 7. There are multiple network interfaces on the > servers, could that be a problem? > > > > > On 21 September 2015 at 11:48, Jiffin Tony Thottan > <jthottan at redhat.com <mailto:jthottan at redhat.com>> wrote: > > > > On 21/09/15 13:56, Tiemen Ruiten wrote: >> Hello Soumya, Kaleb, list, >> >> This Friday I created the gluster_shared_storage volume manually, >> I just tried it with the command you supplied, but both have the >> same result: >> >> from etc-glusterfs-glusterd.vol.log on the node where I issued >> the command: >> >> [2015-09-21 07:59:47.756845] I [MSGID: 106474] >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha >> host found Hostname is cobalt >> [2015-09-21 07:59:48.071755] I [MSGID: 106474] >> [glusterd-ganesha.c:349:is_ganesha_host] 0-management: ganesha >> host found Hostname is cobalt >> [2015-09-21 07:59:48.653879] E [MSGID: 106470] >> [glusterd-ganesha.c:264:glusterd_op_set_ganesha] 0-management: >> Initial NFS-Ganesha set up failed > > As far as what I understand from the logs, it called > setup_cluser()[calls `ganesha-ha.sh` script ] but script failed. > Can u please provide following details : > -Location of ganesha.sh file?? > -Location of ganesha-ha.conf, ganesha.conf files ? > > > And also can u cross check whether all the prerequisites before HA > setup satisfied ? > > -- > With Regards, > Jiffin > > >> [2015-09-21 07:59:48.653912] E [MSGID: 106123] >> [glusterd-syncop.c:1404:gd_commit_op_phase] 0-management: Commit >> of operation 'Volume (null)' failed on localhost : Failed to set >> up HA config for NFS-Ganesha. Please check the log file for details >> [2015-09-21 07:59:45.402458] I [MSGID: 106006] >> [glusterd-svc-mgmt.c:323:glusterd_svc_common_rpc_notify] >> 0-management: nfs has disconnected from glusterd. >> [2015-09-21 07:59:48.071578] I [MSGID: 106474] >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha >> host found Hostname is cobalt >> >> from etc-glusterfs-glusterd.vol.log on the other node: >> >> [2015-09-21 08:12:50.111877] E [MSGID: 106062] >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: >> Unable to acquire volname >> [2015-09-21 08:14:50.548087] E [MSGID: 106062] >> [glusterd-op-sm.c:3635:glusterd_op_ac_lock] 0-management: Unable >> to acquire volname >> [2015-09-21 08:14:50.654746] I [MSGID: 106132] >> [glusterd-proc-mgmt.c:83:glusterd_proc_stop] 0-management: nfs >> already stopped >> [2015-09-21 08:14:50.655095] I [MSGID: 106474] >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha >> host found Hostname is cobalt >> [2015-09-21 08:14:51.287156] E [MSGID: 106062] >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: >> Unable to acquire volname >> >> >> from etc-glusterfs-glusterd.vol.log on the arbiter node: >> >> [2015-09-21 08:18:50.934713] E [MSGID: 101075] >> [common-utils.c:3127:gf_is_local_addr] 0-management: error in >> getaddrinfo: Name or service not known >> [2015-09-21 08:18:51.504694] E [MSGID: 106062] >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: >> Unable to acquire volname >> >> I have put the hostnames of all servers in my /etc/hosts file, >> including the arbiter node. >> >> >> On 18 September 2015 at 16:52, Soumya Koduri <skoduri at redhat.com >> <mailto:skoduri at redhat.com>> wrote: >> >> Hi Tiemen, >> >> One of the pre-requisites before setting up nfs-ganesha HA is >> to create and mount shared_storage volume. Use below CLI for that >> >> "gluster volume set all cluster.enable-shared-storage enable" >> >> It shall create the volume and mount in all the nodes >> (including the arbiter node). Note this volume shall be >> mounted on all the nodes of the gluster storage pool (though >> in this case it may not be part of nfs-ganesha cluster). >> >> So instead of manually creating those directory paths, please >> use above CLI and try re-configuring the setup. >> >> Thanks, >> Soumya >> >> On 09/18/2015 07:29 PM, Tiemen Ruiten wrote: >> >> Hello Kaleb, >> >> I don't: >> >> # Name of the HA cluster created. >> # must be unique within the subnet >> HA_NAME="rd-ganesha-ha" >> # >> # The gluster server from which to mount the shared data >> volume. >> HA_VOL_SERVER="iron" >> # >> # N.B. you may use short names or long names; you may not >> use IP addrs. >> # Once you select one, stay with it as it will be mildly >> unpleasant to >> # clean up if you switch later on. Ensure that all names >> - short and/or >> # long - are in DNS or /etc/hosts on all machines in the >> cluster. >> # >> # The subset of nodes of the Gluster Trusted Pool that >> form the ganesha >> # HA cluster. Hostname is specified. >> HA_CLUSTER_NODES="cobalt,iron" >> #HA_CLUSTER_NODES="server1.lab.redhat.com >> <http://server1.lab.redhat.com> >> <http://server1.lab.redhat.com>,server2.lab.redhat.com >> <http://server2.lab.redhat.com> >> <http://server2.lab.redhat.com>,..." >> # >> # Virtual IPs for each of the nodes specified above. >> VIP_server1="10.100.30.101" >> VIP_server2="10.100.30.102" >> #VIP_server1_lab_redhat_com="10.0.2.1" >> #VIP_server2_lab_redhat_com="10.0.2.2" >> >> hosts cobalt & iron are the data nodes, the arbiter >> ip/hostname (neon) >> isn't mentioned anywhere in this config file. >> >> >> On 18 September 2015 at 15:56, Kaleb S. KEITHLEY >> <kkeithle at redhat.com <mailto:kkeithle at redhat.com> >> <mailto:kkeithle at redhat.com >> <mailto:kkeithle at redhat.com>>> wrote: >> >> On 09/18/2015 09:46 AM, Tiemen Ruiten wrote: >> > Hello, >> > >> > I have a Gluster cluster with a single replica 3, >> arbiter 1 volume (so >> > two nodes with actual data, one arbiter node). I >> would like to setup >> > NFS-Ganesha HA for this volume but I'm having some >> difficulties. >> > >> > - I needed to create a directory >> /var/run/gluster/shared_storage >> > manually on all nodes, or the command 'gluster >> nfs-ganesha enable would >> > fail with the following error: >> > [2015-09-18 13:13:34.690416] E [MSGID: 106032] >> > [glusterd-ganesha.c:708:pre_setup] 0-THIS->name: >> mkdir() failed on path >> > /var/run/gluster/shared_storage/nfs-ganesha, [No >> such file or directory] >> > >> > - Then I found out that the command connects to the >> arbiter node as >> > well, but obviously I don't want to set up >> NFS-Ganesha there. Is it >> > actually possible to setup NFS-Ganesha HA with an >> arbiter node? If it's >> > possible, is there any documentation on how to do that? >> > >> >> Please send the /etc/ganesha/ganesha-ha.conf file >> you're using. >> >> Probably you have included the arbiter in your HA >> config; that would be >> a mistake. >> >> -- >> >> Kaleb >> >> >> >> >> -- >> Tiemen Ruiten >> Systems Engineer >> R&D Media >> >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> >> http://www.gluster.org/mailman/listinfo/gluster-users >> >> >> >> >> -- >> Tiemen Ruiten >> Systems Engineer >> R&D Media >> >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> >> http://www.gluster.org/mailman/listinfo/gluster-users > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > http://www.gluster.org/mailman/listinfo/gluster-users > > > > > -- > Tiemen Ruiten > Systems Engineer > R&D Media > > > > -- > Tiemen Ruiten > Systems Engineer > R&D Media > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://www.gluster.org/mailman/listinfo/gluster-users-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20150922/41821848/attachment.html>
Soumya Koduri
2015-Sep-22 07:04 UTC
[Gluster-users] Fwd: nfs-ganesha HA with arbiter volume
Hi Tiemen, Have added the steps to configure HA NFS in the below doc. Please verify if you have all the pre-requisites done & steps performed right. https://github.com/soumyakoduri/glusterdocs/blob/ha_guide/Administrator%20Guide/Configuring%20HA%20NFS%20Server.md Thanks, Soumya On 09/21/2015 09:21 PM, Tiemen Ruiten wrote:> Whoops, replied off-list. > > Additionally I noticed that the generated corosync config is not valid, > as there is no interface section: > > /etc/corosync/corosync.conf > > totem { > version: 2 > secauth: off > cluster_name: rd-ganesha-ha > transport: udpu > } > > nodelist { > ? node { > ? ? ? ? ring0_addr: cobalt > ? ? ? ? nodeid: 1 > ? ? ? ? } > ? node { > ? ? ? ? ring0_addr: iron > ? ? ? ? nodeid: 2 > ? ? ? ? } > } > > quorum { > provider: corosync_votequorum > two_node: 1 > } > > logging { > to_syslog: yes > } > > > > > ---------- Forwarded message ---------- > From: *Tiemen Ruiten* <t.ruiten at rdmedia.com <mailto:t.ruiten at rdmedia.com>> > Date: 21 September 2015 at 17:16 > Subject: Re: [Gluster-users] nfs-ganesha HA with arbiter volume > To: Jiffin Tony Thottan <jthottan at redhat.com <mailto:jthottan at redhat.com>> > > > Could you point me to the latest documentation? I've been struggling to > find something up-to-date. I believe I have all the prerequisites: > > - shared storage volume exists and is mounted > - all nodes in hosts files > - Gluster-NFS disabled > - corosync, pacemaker and nfs-ganesha rpm's installed > > Anything I missed? > > Everything has been installed by RPM so is in the default locations: > /usr/libexec/ganesha/ganesha-ha.sh > /etc/ganesha/ganesha.conf (empty) > /etc/ganesha/ganesha-ha.conf > > After I started the pcsd service manually, nfs-ganesha could be enabled > successfully, but there was no virtual IP present on the interfaces and > looking at the system log, I noticed corosync failed to start: > > - on the host where I issued the gluster nfs-ganesha enable command: > > Sep 21 17:07:18 iron systemd: Starting NFS-Ganesha file server... > Sep 21 17:07:19 iron systemd: Started NFS-Ganesha file server. > Sep 21 17:07:19 iron rpc.statd[2409]: Received SM_UNMON_ALL request from > iron.int.rdmedia.com <http://iron.int.rdmedia.com> while not monitoring > any hosts > Sep 21 17:07:20 iron systemd: Starting Corosync Cluster Engine... > Sep 21 17:07:20 iron corosync[3426]: [MAIN ? ] Corosync Cluster Engine > ('2.3.4'): started and ready to provide service. > Sep 21 17:07:20 iron corosync[3426]: [MAIN ? ] Corosync built-in > features: dbus systemd xmlconf snmp pie relro bindnow > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing transport > (UDP/IP Unicast). > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing > transmit/receive security (NSS) crypto: none hash: none > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] The network interface > [10.100.30.38] is now up. > Sep 21 17:07:20 iron corosync[3427]: [SERV ? ] Service engine loaded: > corosync configuration map access [0] > Sep 21 17:07:20 iron corosync[3427]: [QB ? ? ] server name: cmap > Sep 21 17:07:20 iron corosync[3427]: [SERV ? ] Service engine loaded: > corosync configuration service [1] > Sep 21 17:07:20 iron corosync[3427]: [QB ? ? ] server name: cfg > Sep 21 17:07:20 iron corosync[3427]: [SERV ? ] Service engine loaded: > corosync cluster closed process group service v1.01 [2] > Sep 21 17:07:20 iron corosync[3427]: [QB ? ? ] server name: cpg > Sep 21 17:07:20 iron corosync[3427]: [SERV ? ] Service engine loaded: > corosync profile loading service [4] > Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Using quorum provider > corosync_votequorum > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:20 iron corosync[3427]: [SERV ? ] Service engine loaded: > corosync vote quorum service v1.0 [5] > Sep 21 17:07:20 iron corosync[3427]: [QB ? ? ] server name: votequorum > Sep 21 17:07:20 iron corosync[3427]: [SERV ? ] Service engine loaded: > corosync cluster quorum service v0.1 [3] > Sep 21 17:07:20 iron corosync[3427]: [QB ? ? ] server name: quorum > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member > {10.100.30.38} > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member > {10.100.30.37} > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership > (10.100.30.38:104 <http://10.100.30.38:104>) was formed. Members joined: 1 > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Members[1]: 1 > Sep 21 17:07:20 iron corosync[3427]: [MAIN ? ] Completed service > synchronization, ready to provide service. > Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership > (10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members joined: 1 > Sep 21 17:08:21 iron corosync: Starting Corosync Cluster Engine > (corosync): [FAILED] > Sep 21 17:08:21 iron systemd: corosync.service: control process exited, > code=exited status=1 > Sep 21 17:08:21 iron systemd: Failed to start Corosync Cluster Engine. > Sep 21 17:08:21 iron systemd: Unit corosync.service entered failed state. > > > - on the other host: > > Sep 21 17:07:19 cobalt systemd: Starting Preprocess NFS configuration... > Sep 21 17:07:19 cobalt systemd: Starting RPC Port Mapper. > Sep 21 17:07:19 cobalt systemd: Reached target RPC Port Mapper. > Sep 21 17:07:19 cobalt systemd: Starting Host and Network Name Lookups. > Sep 21 17:07:19 cobalt systemd: Reached target Host and Network Name > Lookups. > Sep 21 17:07:19 cobalt systemd: Starting RPC bind service... > Sep 21 17:07:19 cobalt systemd: Started Preprocess NFS configuration. > Sep 21 17:07:19 cobalt systemd: Started RPC bind service. > Sep 21 17:07:19 cobalt systemd: Starting NFS status monitor for NFSv2/3 > locking.... > Sep 21 17:07:19 cobalt rpc.statd[2662]: Version 1.3.0 starting > Sep 21 17:07:19 cobalt rpc.statd[2662]: Flags: TI-RPC > Sep 21 17:07:19 cobalt systemd: Started NFS status monitor for NFSv2/3 > locking.. > Sep 21 17:07:19 cobalt systemd: Starting NFS-Ganesha file server... > Sep 21 17:07:19 cobalt systemd: Started NFS-Ganesha file server. > Sep 21 17:07:19 cobalt kernel: warning: `ganesha.nfsd' uses 32-bit > capabilities (legacy support in use) > Sep 21 17:07:19 cobalt logger: setting up rd-ganesha-ha > Sep 21 17:07:19 cobalt rpc.statd[2662]: Received SM_UNMON_ALL request > from cobalt.int.rdmedia.com <http://cobalt.int.rdmedia.com> while not > monitoring any hosts > Sep 21 17:07:19 cobalt logger: setting up cluster rd-ganesha-ha with the > following cobalt iron > Sep 21 17:07:20 cobalt systemd: Stopped Pacemaker High Availability > Cluster Manager. > Sep 21 17:07:20 cobalt systemd: Stopped Corosync Cluster Engine. > Sep 21 17:07:20 cobalt systemd: Reloading. > Sep 21 17:07:20 cobalt systemd: > [/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue > 'RemoveOnStop' in section 'Socket' > Sep 21 17:07:20 cobalt systemd: > [/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue > 'RemoveOnStop' in section 'Socket' > Sep 21 17:07:20 cobalt systemd: Reloading. > Sep 21 17:07:20 cobalt systemd: > [/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue > 'RemoveOnStop' in section 'Socket' > Sep 21 17:07:20 cobalt systemd: > [/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue > 'RemoveOnStop' in section 'Socket' > Sep 21 17:07:20 cobalt systemd: Starting Corosync Cluster Engine... > Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ? ] Corosync Cluster Engine > ('2.3.4'): started and ready to provide service. > Sep 21 17:07:20 cobalt corosync[2816]: [MAIN ? ] Corosync built-in > features: dbus systemd xmlconf snmp pie relro bindnow > Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing transport > (UDP/IP Unicast). > Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing > transmit/receive security (NSS) crypto: none hash: none > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] The network interface > [10.100.30.37] is now up. > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ? ] Service engine loaded: > corosync configuration map access [0] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ? ? ] server name: cmap > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ? ] Service engine loaded: > corosync configuration service [1] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ? ? ] server name: cfg > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ? ] Service engine loaded: > corosync cluster closed process group service v1.01 [2] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ? ? ] server name: cpg > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ? ] Service engine loaded: > corosync profile loading service [4] > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Using quorum provider > corosync_votequorum > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ? ] Service engine loaded: > corosync vote quorum service v1.0 [5] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ? ? ] server name: votequorum > Sep 21 17:07:21 cobalt corosync[2817]: [SERV ? ] Service engine loaded: > corosync cluster quorum service v0.1 [3] > Sep 21 17:07:21 cobalt corosync[2817]: [QB ? ? ] server name: quorum > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member > {10.100.30.37} > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member > {10.100.30.38} > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership > (10.100.30.37:100 <http://10.100.30.37:100>) was formed. Members joined: 1 > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1 > Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ? ] Completed service > synchronization, ready to provide service. > Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership > (10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members joined: 1 > Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster > members. Current votes: 1 expected_votes: 2 > Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1 > Sep 21 17:07:21 cobalt corosync[2817]: [MAIN ? ] Completed service > synchronization, ready to provide service. > Sep 21 17:08:50 cobalt systemd: corosync.service operation timed out. > Terminating. > Sep 21 17:08:50 cobalt corosync: Starting Corosync Cluster Engine > (corosync): > Sep 21 17:08:50 cobalt systemd: Failed to start Corosync Cluster Engine. > Sep 21 17:08:50 cobalt systemd: Unit corosync.service entered failed state. > Sep 21 17:08:55 cobalt logger: warning: pcs property set > no-quorum-policy=ignore failed > Sep 21 17:08:55 cobalt logger: warning: pcs property set > stonith-enabled=false failed > Sep 21 17:08:55 cobalt logger: warning: pcs resource create nfs_start > ganesha_nfsd ha_vol_mnt=/var/run/gluster/shared_storage --clone failed > Sep 21 17:08:56 cobalt logger: warning: pcs resource delete > nfs_start-clone failed > Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-mon > ganesha_mon --clone failed > Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-grace > ganesha_grace --clone failed > Sep 21 17:08:57 cobalt logger: warning pcs resource create > cobalt-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor > interval=15s failed > Sep 21 17:08:57 cobalt logger: warning: pcs resource create > cobalt-trigger_ip-1 ocf:heartbeat:Dummy failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add > cobalt-cluster_ip-1 with cobalt-trigger_ip-1 failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > cobalt-trigger_ip-1 then nfs-grace-clone failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > nfs-grace-clone then cobalt-cluster_ip-1 failed > Sep 21 17:08:57 cobalt logger: warning pcs resource create > iron-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor > interval=15s failed > Sep 21 17:08:57 cobalt logger: warning: pcs resource create > iron-trigger_ip-1 ocf:heartbeat:Dummy failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add > iron-cluster_ip-1 with iron-trigger_ip-1 failed > Sep 21 17:08:57 cobalt logger: warning: pcs constraint order > iron-trigger_ip-1 then nfs-grace-clone failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint order > nfs-grace-clone then iron-cluster_ip-1 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > cobalt-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > cobalt-cluster_ip-1 prefers iron=1000 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > cobalt-cluster_ip-1 prefers cobalt=2000 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > iron-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > iron-cluster_ip-1 prefers cobalt=1000 failed > Sep 21 17:08:58 cobalt logger: warning: pcs constraint location > iron-cluster_ip-1 prefers iron=2000 failed > Sep 21 17:08:58 cobalt logger: warning pcs cluster cib-push > /tmp/tmp.nXTfyA1GMR failed > Sep 21 17:08:58 cobalt logger: warning: scp ganesha-ha.conf to cobalt failed > > BTW, I'm using CentOS 7. There are multiple network interfaces on the > servers, could that be a problem?? > > > > > On 21 September 2015 at 11:48, Jiffin Tony Thottan <jthottan at redhat.com > <mailto:jthottan at redhat.com>> wrote: > > > > On 21/09/15 13:56, Tiemen Ruiten wrote: >> Hello Soumya, Kaleb, list, >> >> This Friday I created the gluster_shared_storage volume manually, >> I just tried it with the command you supplied, but both have the >> same result: >> >> from etc-glusterfs-glusterd.vol.log on the node where I issued the >> command: >> >> [2015-09-21 07:59:47.756845] I [MSGID: 106474] >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha >> host found Hostname is cobalt >> [2015-09-21 07:59:48.071755] I [MSGID: 106474] >> [glusterd-ganesha.c:349:is_ganesha_host] 0-management: ganesha >> host found Hostname is cobalt >> [2015-09-21 07:59:48.653879] E [MSGID: 106470] >> [glusterd-ganesha.c:264:glusterd_op_set_ganesha] 0-management: >> Initial NFS-Ganesha set up failed > > As far as what I understand from the logs, it called > setup_cluser()[calls `ganesha-ha.sh` script ] but script failed. > Can u please provide following details : > -Location of ganesha.sh file?? > -Location of ganesha-ha.conf, ganesha.conf files ? > > > And also can u cross check whether all the prerequisites before HA > setup satisfied ? > > -- > With Regards, > Jiffin > > >> [2015-09-21 07:59:48.653912] E [MSGID: 106123] >> [glusterd-syncop.c:1404:gd_commit_op_phase] 0-management: Commit >> of operation 'Volume (null)' failed on localhost : Failed to set >> up HA config for NFS-Ganesha. Please check the log file for details >> [2015-09-21 07:59:45.402458] I [MSGID: 106006] >> [glusterd-svc-mgmt.c:323:glusterd_svc_common_rpc_notify] >> 0-management: nfs has disconnected from glusterd. >> [2015-09-21 07:59:48.071578] I [MSGID: 106474] >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha >> host found Hostname is cobalt >> >> from etc-glusterfs-glusterd.vol.log on the other node: >> >> [2015-09-21 08:12:50.111877] E [MSGID: 106062] >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable >> to acquire volname >> [2015-09-21 08:14:50.548087] E [MSGID: 106062] >> [glusterd-op-sm.c:3635:glusterd_op_ac_lock] 0-management: Unable >> to acquire volname >> [2015-09-21 08:14:50.654746] I [MSGID: 106132] >> [glusterd-proc-mgmt.c:83:glusterd_proc_stop] 0-management: nfs >> already stopped >> [2015-09-21 08:14:50.655095] I [MSGID: 106474] >> [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha >> host found Hostname is cobalt >> [2015-09-21 08:14:51.287156] E [MSGID: 106062] >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable >> to acquire volname >> >> >> from etc-glusterfs-glusterd.vol.log on the arbiter node: >> >> [2015-09-21 08:18:50.934713] E [MSGID: 101075] >> [common-utils.c:3127:gf_is_local_addr] 0-management: error in >> getaddrinfo: Name or service not known >> [2015-09-21 08:18:51.504694] E [MSGID: 106062] >> [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable >> to acquire volname >> >> I have put the hostnames of all servers in my /etc/hosts file, >> including the arbiter node. >> >> >> On 18 September 2015 at 16:52, Soumya Koduri <skoduri at redhat.com >> <mailto:skoduri at redhat.com>> wrote: >> >> Hi Tiemen, >> >> One of the pre-requisites before setting up nfs-ganesha HA is >> to create and mount shared_storage volume. Use below CLI for that >> >> "gluster volume set all cluster.enable-shared-storage enable" >> >> It shall create the volume and mount in all the nodes >> (including the arbiter node). Note this volume shall be >> mounted on all the nodes of the gluster storage pool (though >> in this case it may not be part of nfs-ganesha cluster). >> >> So instead of manually creating those directory paths, please >> use above CLI and try re-configuring the setup. >> >> Thanks, >> Soumya >> >> On 09/18/2015 07:29 PM, Tiemen Ruiten wrote: >> >> Hello Kaleb, >> >> I don't: >> >> # Name of the HA cluster created. >> # must be unique within the subnet >> HA_NAME="rd-ganesha-ha" >> # >> # The gluster server from which to mount the shared data >> volume. >> HA_VOL_SERVER="iron" >> # >> # N.B. you may use short names or long names; you may not >> use IP addrs. >> # Once you select one, stay with it as it will be mildly >> unpleasant to >> # clean up if you switch later on. Ensure that all names - >> short and/or >> # long - are in DNS or /etc/hosts on all machines in the >> cluster. >> # >> # The subset of nodes of the Gluster Trusted Pool that >> form the ganesha >> # HA cluster. Hostname is specified. >> HA_CLUSTER_NODES="cobalt,iron" >> #HA_CLUSTER_NODES="server1.lab.redhat.com >> <http://server1.lab.redhat.com> >> <http://server1.lab.redhat.com>,server2.lab.redhat.com >> <http://server2.lab.redhat.com> >> <http://server2.lab.redhat.com>,..." >> # >> # Virtual IPs for each of the nodes specified above. >> VIP_server1="10.100.30.101" >> VIP_server2="10.100.30.102" >> #VIP_server1_lab_redhat_com="10.0.2.1" >> #VIP_server2_lab_redhat_com="10.0.2.2" >> >> hosts cobalt & iron are the data nodes, the arbiter >> ip/hostname (neon) >> isn't mentioned anywhere in this config file. >> >> >> On 18 September 2015 at 15:56, Kaleb S. KEITHLEY >> <<mailto:kkeithle at redhat.com>kkeithle at redhat.com >> <mailto:kkeithle at redhat.com> >> <mailto:kkeithle at redhat.com <mailto:kkeithle at redhat.com>>> >> wrote: >> >> ? ? On 09/18/2015 09:46 AM, Tiemen Ruiten wrote: >> ? ? > Hello, >> ? ? > >> ? ? > I have a Gluster cluster with a single replica 3, >> arbiter 1 volume (so >> ? ? > two nodes with actual data, one arbiter node). I >> would like to setup >> ? ? > NFS-Ganesha HA for this volume but I'm having some >> difficulties. >> ? ? > >> ? ? > - I needed to create a directory >> /var/run/gluster/shared_storage >> ? ? > manually on all nodes, or the command 'gluster >> nfs-ganesha enable would >> ? ? > fail with the following error: >> ? ? > [2015-09-18 13:13:34.690416] E [MSGID: 106032] >> ? ? > [glusterd-ganesha.c:708:pre_setup] 0-THIS->name: >> mkdir() failed on path >> ? ? > /var/run/gluster/shared_storage/nfs-ganesha, [No >> such file or directory] >> ? ? > >> ? ? > - Then I found out that the command connects to >> the arbiter node as >> ? ? > well, but obviously I don't want to set up >> NFS-Ganesha there. Is it >> ? ? > actually possible to setup NFS-Ganesha HA with an >> arbiter node? If it's >> ? ? > possible, is there any documentation on how to do >> that? >> ? ? > >> >> ? ? Please send the /etc/ganesha/ganesha-ha.conf file >> you're using. >> >> ? ? Probably you have included the arbiter in your HA >> config; that would be >> ? ? a mistake. >> >> ? ? -- >> >> ? ? Kaleb >> >> >> >> >> -- >> Tiemen Ruiten >> Systems Engineer >> R&D Media >> >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> >> http://www.gluster.org/mailman/listinfo/gluster-users >> >> >> >> >> -- >> Tiemen Ruiten >> Systems Engineer >> R&D Media >> >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> >> http://www.gluster.org/mailman/listinfo/gluster-users > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > http://www.gluster.org/mailman/listinfo/gluster-users > > > > > -- > Tiemen Ruiten > Systems Engineer > R&D Media > > > > -- > Tiemen Ruiten > Systems Engineer > R&D Media > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://www.gluster.org/mailman/listinfo/gluster-users >