I have a two node replicated volume, I recently rebuilt one and while they are re re synced even with a gigabit interconnect, they only transfer at 300mbps and with 6 cores at 2.0 utilization. I turned on performance.lower.threads.disable which didn't change much and stat'd the whole volume. There's also no other traffic and no frame errors on the switch. Underlying volumes are zfs (compression/no dedup) over luks, but I don't see any major use from either processes either. Disks are on a sata iii. Any suggestions are appreciated based on similar configuration. -Ben Sent from my phone. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20150526/21ce15a7/attachment.html>