On Sun, 28 Feb 2021 09:26:23 -0800 Carl Johnson <carlj at peak.org> wrote:> I have an 8GB RPi 4B that I am trying out, but it has no USB response at > all. That means that I can't use a keyboard or mouse, but I can use a > serial console and ethernet. I can plug any USB device into any port, > but there is nothing logged in /var/messages. Running usbconfig as root > just reports 'No device match or lack of permissions'. Running > 'dmesg | grep -i usb' reports only the following lines: > > usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 > bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 81 at device 0.0 on pci2 > usb_needs_explore_all: no devclass > > Running 'pciconf -lv' shows there is a VL805 USB controller present. I > tested this with Linux and everything worked properly. This is a new > computer that I bought only a couple of weeks ago. Does anybody have > any ideas on what this might be, or what I could do to try to figure it > out? > > Thanks in advance for any ideas. > -- > Carl Johnson carlj at peak.org > > _______________________________________________ > freebsd-stable at freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"Hello, This is known, see https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252971#c25 I wanted to wait that a tag was created on the rpi-firmware github repo but it seems that they don't want to so I'll update the port next week so RC1 will have the updated firmware. Cheers, -- Emmanuel Vadot <manu at bidouilliste.com> <manu at FreeBSD.org>
Emmanuel Vadot <manu at bidouilliste.com> writes:> On Sun, 28 Feb 2021 09:26:23 -0800 > Carl Johnson <carlj at peak.org> wrote: > >> I have an 8GB RPi 4B that I am trying out, but it has no USB response at >> all. That means that I can't use a keyboard or mouse, but I can use a >> serial console and ethernet. I can plug any USB device into any port, >> but there is nothing logged in /var/messages. Running usbconfig as root >> just reports 'No device match or lack of permissions'. Running >> 'dmesg | grep -i usb' reports only the following lines: >> >> usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 >> bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 81 at device 0.0 on pci2 >> usb_needs_explore_all: no devclass >> >> Running 'pciconf -lv' shows there is a VL805 USB controller present. I >> tested this with Linux and everything worked properly. This is a new >> computer that I bought only a couple of weeks ago. Does anybody have >> any ideas on what this might be, or what I could do to try to figure it >> out? >> >> Thanks in advance for any ideas. >> -- >> Carl Johnson carlj at peak.org >> >> _______________________________________________ >> freebsd-stable at freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org" > > Hello, > > This is known, see > https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252971#c25 > > I wanted to wait that a tag was created on the rpi-firmware github > repo but it seems that they don't want to so I'll update the port next > week so RC1 will have the updated firmware. > > Cheers,Thank you very much for that! I will test that as soon as it comes out. -- Carl Johnson carlj at peak.org
Carl Johnson <carlj at peak.org> writes:> Emmanuel Vadot <manu at bidouilliste.com> writes: > >> On Sun, 28 Feb 2021 09:26:23 -0800 >> Carl Johnson <carlj at peak.org> wrote: >> >>> I have an 8GB RPi 4B that I am trying out, but it has no USB response at >>> all. That means that I can't use a keyboard or mouse, but I can use a >>> serial console and ethernet. I can plug any USB device into any port, >>> but there is nothing logged in /var/messages. Running usbconfig as root >>> just reports 'No device match or lack of permissions'. Running >>> 'dmesg | grep -i usb' reports only the following lines: >>> >>> usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 >>> bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 81 at device 0.0 on pci2 >>> usb_needs_explore_all: no devclass >>> >>> Running 'pciconf -lv' shows there is a VL805 USB controller present. I >>> tested this with Linux and everything worked properly. This is a new >>> computer that I bought only a couple of weeks ago. Does anybody have >>> any ideas on what this might be, or what I could do to try to figure it >>> out? >>> >>> Thanks in advance for any ideas. >>> -- >>> Carl Johnson carlj at peak.org >> >> Hello, >> >> This is known, see >> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252971#c25 >> >> I wanted to wait that a tag was created on the rpi-firmware github >> repo but it seems that they don't want to so I'll update the port next >> week so RC1 will have the updated firmware. >> >> Cheers, > > Thank you very much for that! I will test that as soon as it comes > out.Just for the record, RC3 now works properly. Thanks to everyone for getting this fix in before the release. -- Carl Johnson carlj at peak.org