I have a weird situation with an PCEngines APU3, where I can't seem to be
able to transmit packets through either of the igb interfaces. With tcpdump, I
can see packets arriving, and the interface flags appear to be just fine:
options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 00:0d:b9:58:xx:xx
inet6 fe80::20d:b9ff:xxxx:xxxx%igb0 prefixlen 64 scopeid 0x1
inet6 2a02:8108:4840:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 autoconf
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
dhclient is running on that interfaces, and I got an IPv6 address through RA.
Assigning an address manually doesn't change anything.
igb0 at pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x157b8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'I210 Gigabit Network Connection'
class = network
subclass = ethernet
# freebsd-version
12.2-RELEASE
I installed 12.2-REL a couple of weeks ago, and haven't done anything since.
Tried the three different port with different cables on different switch ports,
which are working fine with other machines.
I'm installing updates now via a USB adapter.
Any suggestions?
Stefan
--
Stefan Bethke <stb at lassitu.de> Fon +49 151 14070811
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: Message signed with OpenPGP
URL:
<http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20210122/2e3a976b/attachment.sig>
Am 22.01.2021 um 22:10 schrieb Stefan Bethke <stb at lassitu.de>:> > I have a weird situation with an PCEngines APU3, where I can't seem to be able to transmit packets through either of the igb interfaces. With tcpdump, I can see packets arriving, and the interface flags appear to be just fine: > options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:0d:b9:58:xx:xx > inet6 fe80::20d:b9ff:xxxx:xxxx%igb0 prefixlen 64 scopeid 0x1 > inet6 2a02:8108:4840:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 autoconf > inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 > media: Ethernet autoselect (1000baseT <full-duplex>) > status: active > nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> > > dhclient is running on that interfaces, and I got an IPv6 address through RA. > > Assigning an address manually doesn't change anything. > > igb0 at pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x157b8086 rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = 'I210 Gigabit Network Connection' > class = network > subclass = ethernet > > # freebsd-version > 12.2-RELEASE > > I installed 12.2-REL a couple of weeks ago, and haven't done anything since. > > Tried the three different port with different cables on different switch ports, which are working fine with other machines. > > I'm installing updates now via a USB adapter.Updating the firmware to apu2_v4.11.0.6.rom didn't change a thing. Somebody suggested turning off LRO, but that didn't help either. I have another APU2 with 12.1 that is doing just fine. I guess I can downgrade and see if that changes anything. Stefan -- Stefan Bethke <stb at lassitu.de> Fon +49 151 14070811 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 488 bytes Desc: Message signed with OpenPGP URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20210122/030c19b8/attachment.sig>
Try "ifconfig $ifname -rxcsum -txcsum" and possibly " -vlanhwtso -tso4" as well. Graham On 23/01/2021 8:10 am, Stefan Bethke wrote:> I have a weird situation with an PCEngines APU3, where I can't seem to be able to transmit packets through either of the igb interfaces. With tcpdump, I can see packets arriving, and the interface flags appear to be just fine: > options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:0d:b9:58:xx:xx > inet6 fe80::20d:b9ff:xxxx:xxxx%igb0 prefixlen 64 scopeid 0x1 > inet6 2a02:8108:4840:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 autoconf > inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 > media: Ethernet autoselect (1000baseT <full-duplex>) > status: active > nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> > > dhclient is running on that interfaces, and I got an IPv6 address through RA. > > Assigning an address manually doesn't change anything. > > igb0 at pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x157b8086 rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = 'I210 Gigabit Network Connection' > class = network > subclass = ethernet > > # freebsd-version > 12.2-RELEASE > > I installed 12.2-REL a couple of weeks ago, and haven't done anything since. > > Tried the three different port with different cables on different switch ports, which are working fine with other machines. > > I'm installing updates now via a USB adapter. > > Any suggestions? > > > Stefan > > -- > Stefan Bethke <stb at lassitu.de> Fon +49 151 14070811 >