hi, just trying out 12,1 on a DELL PowerEdge R710, and I see: ... Oct 16 22:52:12 store-08 kernel: bce3: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x0023600E) Oct 16 22:52:13 store-08 kernel: Limiting icmp unreach response from 3244 to 200 packets/sec Oct 16 22:52:13 store-08 kernel: bce3: bce_pulse(): Bootcode found the driver pulse! (bc_state = 0x0003610E) Oct 17 06:04:29 store-08 kernel: Limiting icmp unreach response from 564 to 200 packets/sec there is nothing connected to bce3, only bce0, rev is r353486, and it?s diskless. BTW: is there a way of knowing which port is being reported as unreachable? any ideas? thanks, danny
17.10.2019 12:37, Daniel Braniss wrote:> just trying out 12,1 on a DELL PowerEdge R710, and I see: > ... > Oct 16 22:52:12 store-08 kernel: bce3: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x0023600E) > Oct 16 22:52:13 store-08 kernel: Limiting icmp unreach response from 3244 to 200 packets/sec > Oct 16 22:52:13 store-08 kernel: bce3: bce_pulse(): Bootcode found the driver pulse! (bc_state = 0x0003610E) > Oct 17 06:04:29 store-08 kernel: Limiting icmp unreach response from 564 to 200 packets/sec > > there is nothing connected to bce3, only bce0, > rev is r353486, and it?s diskless.Does it experience some disruption? If not, you may just ignore those.> BTW: is there a way of knowing which port is being reported as unreachable?So many packets should be easily seen with net/trafshow or just tcpdump.