Willem Jan Withagen
2018-May-14 14:35 UTC
USB GSM still in trouble after upgrade to 11.1-RELEASE-p10
Hi, Yesterday evening I upgraded a system to 11.1-RELEASE-p10. But that sort of upset my GSM-dongle I use for alarming. And it did not do that before the upgrade, where I was running -p9. This is what I find repeated at rather high frequency in the logs: +ugen1.3: <HUAWEI Technologies HUAWEI Mobile> at usbus1 +u3g0 on uhub3 +u3g0: <Data Interface> on usbus1 +u3g0: Found 2 ports. +umass0 on uhub3 +umass0: <HUAWEI Technologies HUAWEI Mobile, class 0/0, rev 1.10/0.00, addr 3> on usbus1 +umass0: SCSI over Bulk-Only; quirks = 0x0000 +umass0:3:0: Attached to scbus3 +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error +(probe0:umass-sim0:0:0:0): Retrying command +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error +(probe0:umass-sim0:0:0:0): Retrying command +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error +(probe0:umass-sim0:0:0:0): Retrying command +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error +(probe0:umass-sim0:0:0:0): Retrying command +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error +(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted +ugen1.3: <HUAWEI Technologies HUAWEI Mobile> at usbus1 (disconnected) +u3g0: at uhub3, port 2, addr 3 (disconnected) +u3g0: detached +umass0: at uhub3, port 2, addr 3 (disconnected) +umass0: detached So when I get home, I'm going to pull the stick. But what could be going on here? --WjW
Per olof Ljungmark
2018-May-14 20:32 UTC
USB GSM still in trouble after upgrade to 11.1-RELEASE-p10
On 05/14/18 16:35, Willem Jan Withagen wrote:> Hi, > > Yesterday evening I upgraded a system to 11.1-RELEASE-p10. > But that sort of upset my GSM-dongle I use for alarming. > > And it did not do that before the upgrade, where I was running -p9. > > > This is what I find repeated at rather high frequency in the logs: > +ugen1.3: <HUAWEI Technologies HUAWEI Mobile> at usbus1 > +u3g0 on uhub3 > +u3g0: <Data Interface> on usbus1 > +u3g0: Found 2 ports. > +umass0 on uhub3 > +umass0: <HUAWEI Technologies HUAWEI Mobile, class 0/0, rev 1.10/0.00, > addr 3> on usbus1 > +umass0: SCSI over Bulk-Only; quirks = 0x0000 > +umass0:3:0: Attached to scbus3 > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Retrying command > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Retrying command > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Retrying command > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Retrying command > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted > +ugen1.3: <HUAWEI Technologies HUAWEI Mobile> at usbus1 (disconnected) > +u3g0: at uhub3, port 2, addr 3 (disconnected) > +u3g0: detached > +umass0: at uhub3, port 2, addr 3 (disconnected) > +umass0: detached > > So when I get home, I'm going to pull the stick. > But what could be going on here?I have identical behavior on a FreeBSD 11.1-STABLE #0 r330526 system after it was restarted today. It used to work with a Huawei E398 but after the reboot it does not, just like your above. Interestingly, I replaced it with a much older Huawei E1750 and that one worked, but only after I rebooted again. With the E398 after a reboot I only see /dev/cuau1, no cuaUX.X If I pull it and replace with E1750 nothing happens If I reboot with the E1750 in place, I get /dev/cuaUX.X Fishy...