On Mon, April 23, 2018 23:18, Nenhum_de_Nos wrote:> Hi,
>
> I would like to know how to debug this. I have two 4 disk enclosures:
>
> Mediasonic ProBox 4 Bay 3.5' SATA HDD Enclosure ? USB 3.0 & eSATA
> (HF2-SU3S2)
> NexStar HX4 - NST-640SU3-BK
>
> and both have 4 disk on them, and not all disk are equal.
>
> The issue comes when I plug the probox usb3 enclosure on the system. I
> can't even read the /var/log/message, it crashes very quickly.
>
> I can see on the boot process up to the point where the second enclosure
> comes to be loaded. The 4 disk are shown on the dmesg/console, and then a
> core dump happens, the boot process goes to the debug screen and a restart
> happens like a flash.
>
> The motherboard is a Intel? Desktop Board D525MW running 8GB RAM.
> All disk use ZFS, 4 or 5 zpools, one raidz, one mirror and two or three
> single disk pools.
> FreeBSD xxx 11.1-RELEASE-p7 FreeBSD 11.1-RELEASE-p7 #1 r330596: Thu Mar 8
> 06:45:59 -03 2018 root at xxx:/usr/obj/usr/src/sys/FreeBSD-11-amd64-PF
> amd64
>
> The kernel is a slightly modified generic, just to have altq.
>
> How can I debug this? I have no idea. I have to use two machines to run
> all those disks, and I would really like to have just one for it.
>
> Can it be the amount of RAM? The other box is and APU2 from PCEngines and
> have 4GB ram. apu2 uname -a: FreeBSD yyy 11.1-RELEASE-p4 FreeBSD
> 11.1-RELEASE-p4 #0: Tue Nov 14 06:12:40 UTC 2017
> root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>
> I tried to plug the Vantec hardware on the apu2 box, but there it would
> not panic, but won't load all vantec disks neither. I really run out of
> ideas here :(
>
> thanks.
>
> --
> "We will call you Cygnus,
> the God of balance you shall be."
Hi,
I found some logs on the daily security output:
+ZFS filesystem version: 5
+ZFS storage pool version: features support (5000)
+panic: Solaris(panic): blkptr at 0xfffff8000b93c848 DVA 1 has invalid VDEV 1
+cpuid = 0
+KDB: stack backtrace:
+#0 0xffffffff80ab65c7 at kdb_backtrace+0x67
+#1 0xffffffff80a746a6 at vpanic+0x186
+#2 0xffffffff80a74513 at panic+0x43
+#3 0xffffffff82623192 at vcmn_err+0xc2
+#4 0xffffffff824a73ba at zfs_panic_recover+0x5a
+#5 0xffffffff824ce893 at zfs_blkptr_verify+0x2d3
+#6 0xffffffff824ce8dc at zio_read+0x2c
+#7 0xffffffff82445fb4 at arc_read+0x6c4
+#8 0xffffffff824636a4 at dmu_objset_open_impl+0xd4
+#9 0xffffffff8247eafa at dsl_pool_init+0x2a
+#10 0xffffffff8249b093 at spa_load+0x823
+#11 0xffffffff8249a2de at spa_load_best+0x6e
+#12 0xffffffff82496a81 at spa_open_common+0x101
+#13 0xffffffff824e2879 at pool_status_check+0x29
+#14 0xffffffff824eba3d at zfsdev_ioctl+0x4ed
+#15 0xffffffff809429f8 at devfs_ioctl_f+0x128
+#16 0xffffffff80ad1f15 at kern_ioctl+0x255
+CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1800.11-MHz K8-class CPU)
+avail memory = 8246845440 (7864 MB)
+Timecounter "TSC" frequency 1800110007 Hz quality 1000
+GEOM_PART: integrity check failed (ada0s1, BSD)
+GEOM_PART: integrity check failed (diskid/DISK-5LZ0ZDBBs1, BSD)
+ugen1.2: <Dell Dell KM632 Wireless Keyboard and Mouse> at usbus1
+ukbd0 on uhub0
+ukbd0: <Dell Dell KM632 Wireless Keyboard and Mouse, class 0/0, rev
2.00/1.30, addr
2> on usbus1
+kbd2 at ukbd0
+ZFS filesystem version: 5
+ZFS storage pool version: features support (5000)
+re0: link state changed to DOWN
+uhid0 on uhub0
+uhid0: <Dell Dell KM632 Wireless Keyboard and Mouse, class 0/0, rev
2.00/1.30, addr
2> on usbus1
+ums0 on uhub0
+ums0: <Dell Dell KM632 Wireless Keyboard and Mouse, class 0/0, rev
2.00/1.30, addr
2> on usbus1
+ums0: 3 buttons and [XYZ] coordinates ID=0
+re0: promiscuous mode enabled
+re0: link state changed to UP
For what I see can be ZFS related.
If anyone have any hints, please tell :)
I kinda got curious about this:
+ZFS storage pool version: features support (5000)
How can I figure out if my pools are from different versions and may this
be the culprit here?
thanks,
matheus
--
"We will call you Cygnus,
the God of balance you shall be."