On 1/19/2018 3:22 PM, Lucas Holt wrote:> I have an Asus Prime X370-pro and a Ryzen 7 1700 that I bought in late
Thanks! Thats the board I have, but no luck with amdtemp. Did you have
to change the source code for it to work ?
dmidecode shows
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: PRIME X370-PRO
Vendor: American Megatrends Inc.
Version: 3402
Release Date: 12/11/2017
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 16 MB
Characteristics:
memory is
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2133 MT/s
Manufacturer: Unknown
Serial Number: 192BE196
Asset Tag: Not Specified
Part Number: CT16G4DFD824A.C16FHD
Rank: 2
Configured Clock Speed: 1067 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
When I try and load the kld, I get nothing :(
0(ms-v1)# kldload amdtemp
0(ms-v1)# dmesg | tail -2
ums0: at uhub0, port 3, addr 1 (disconnected)
ums0: detached
0(ms-v1)#
> April.? Make sure you have the latest BIOS for these boards or else it
> will randomly freak out.
>
> While i haven't used it much with FreeBSD, I can confirm that I had a
> lot of stability issues solved with a December BIOS update on
> MidnightBSD. I back ported the shared page fix and amdtemp.? (it's
> basically FreeBSD 9.1)
>
> I couldn't even get it to boot until the August BIOS update.? I've
had
> my box stay up at least a week, and it's my primary development box so
> I'm mostly doing src/ports builds all the time on it.
>
> If you have the latest BIOS, check the memory timings too.? It's rather
> picky with some memory modules.
>
> Luke
>
>
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/