Hello
VPD is
none0 at pci0:5:1:0: class=0x020000 card=0x4b011086 chip=0x4b011086
rev=0x11 hdr=0x00
vendor = 'J. Bond Computer Systems'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfebec000, size 16384, enabled
bar [14] = type I/O Port, range 32, base 0xee00, size 512, enabled
cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D3
cap 03[50] = VPD
VPD ident = 'DGD-530T Ghgabht Ethernet @dapte'
But I see... it says some DGD-530T... Do not know why, because it's
DGE-530T for sure.
So you're saying this it hardware degradation?
I will try to find some windows host and plug it in there to check it.
2017-11-17 13:19 GMT+03:00 YongHyeon PYUN <pyunyh at gmail.com>:
> On Fri, Nov 17, 2017 at 09:55:03AM +0300, Mike Black wrote:
> > Hello. I looked into svn code for 8.3R and 11.1R and there seems no
> changes
> > in descriptors/identifiers. So I think that NIC is being wrongly
> identified
> > during startup process - it is being recognized with a wrong PCI VID.
How
> > can this be checked or fixed?
> > I use a loadable kernel module after a startup, so there is no useful
> > messages during boot process.
> >
>
> It seems it's single bit error but if it's dying there would no way
> to get fixed. Given that pciconf(8) says VPD capability, try to
> read it(i.e. pciconf -lcbvV). Generally VPD contains a readable
> product string so you may be able to know whether there are other
> errors. If vendor ID is the only corrupted one, you can simply
> patch the device ID in the driver.
>
> > 15 ????. 2017 ?. 11:00 PM ???????????? "Mike Black"
<amdmiek at gmail.com>
> > ???????:
> >
> > > Hello
> > >
> > > I've got old PCI NIC D-Link DGE530T Rev 11 with SysKonnect
chip on it.
> > > Years ago it worked in FreeBSD 8/9 Stable with if_sk driver.
> > >
> > > Now I'm runnig
> > > 11.1-STABLE FreeBSD 11.1-STABLE #1 r323214: Sat Nov 11 19:06:20
MSK
> 2017
> > > amd_miek at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64
amd64
> > > 1101502 1101502
> > >
> > > But recently I plugged this card back and it's not being
recognized by
> a
> > > driver.
> > >
> > > pciconf says that is
> > > none0 at pci0:5:1:0: class=0x020000 card=0x4b011086
chip=0x4b011086
> > > rev=0x11 hdr=0x00
> > > vendor = 'J. Bond Computer Systems'
> > > class = network
> > > subclass = ethernet
> > > bar [10] = type Memory, range 32, base 0xfebec000, size
16384,
> > > enabled
> > > bar [14] = type I/O Port, range 32, base 0xee00, size 512,
> enabled
> > > cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D3
> > > cap 03[50] = VPD
> > >
> > > According /usr/share/misc/pci_vendors this D-link should have
4b011186
> not
> > > 4b011086.
> > > I looked into driver code (if_sk) and it expects 1186 card also.
> > > I googled about this issue but found no one similar in a recent
years
> > > So I'd like to know what's wrong - some changes in driver
in a recent
> > > years or smth going wrong while OS detecting this NIC. But
that's
> > > confusing, because this exact NIC worked years ago...
> > >
> > > --
> > > amd_miek
> > > Think different.
> > > Just superior.
>
--
amd_miek
Think different.
Just superior.