Hello
I've got old PCI NIC D-Link DGE530T Rev 11 with SysKonnect chip on it.
Years ago it worked in FreeBSD 8/9 Stable with if_sk driver.
Now I'm runnig
11.1-STABLE FreeBSD 11.1-STABLE #1 r323214: Sat Nov 11 19:06:20 MSK 2017
amd_miek at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 1101502
1101502
But recently I plugged this card back and it's not being recognized by a
driver.
pciconf says that is
none0 at pci0:5:1:0: class=0x020000 card=0x4b011086 chip=0x4b011086
rev=0x11 hdr=0x00
vendor = 'J. Bond Computer Systems'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xfebec000, size 16384, enabled
bar [14] = type I/O Port, range 32, base 0xee00, size 512, enabled
cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D3
cap 03[50] = VPD
According /usr/share/misc/pci_vendors this D-link should have 4b011186 not
4b011086.
I looked into driver code (if_sk) and it expects 1186 card also.
I googled about this issue but found no one similar in a recent years
So I'd like to know what's wrong - some changes in driver in a recent
years
or smth going wrong while OS detecting this NIC. But that's confusing,
because this exact NIC worked years ago...
--
amd_miek
Think different.
Just superior.
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
???
???????. www.avast.ru
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Wed, 15 Nov 2017 23:00:33 +0300 Mike Black <amdmiek at gmail.com> wrote> Hello > > I've got old PCI NIC D-Link DGE530T Rev 11 with SysKonnect chip on it. > Years ago it worked in FreeBSD 8/9 Stable with if_sk driver. > > Now I'm runnig > 11.1-STABLE FreeBSD 11.1-STABLE #1 r323214: Sat Nov 11 19:06:20 MSK 2017 > amd_miek at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 1101502 > 1101502 > > But recently I plugged this card back and it's not being recognized by a > driver. > > pciconf says that is > none0 at pci0:5:1:0: class=0x020000 card=0x4b011086 chip=0x4b011086 > rev=0x11 hdr=0x00 > vendor = 'J. Bond Computer Systems' > class = network > subclass = ethernet > bar [10] = type Memory, range 32, base 0xfebec000, size 16384, enabled > bar [14] = type I/O Port, range 32, base 0xee00, size 512, enabled > cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D3 > cap 03[50] = VPD > > According /usr/share/misc/pci_vendors this D-link should have 4b011186 not > 4b011086.Just a hunch; But maybe it was simply a typo? You can probably omit the additional "1" on your local copy of the source, and try to build it again. My guess is you'll have success. NOTE: I'm not an authority on this driver. I'm only attempting to provide a possible solution. :) If you *are* successful. I would advise opening a PR for this. :) --Chris> I looked into driver code (if_sk) and it expects 1186 card also. > I googled about this issue but found no one similar in a recent years > So I'd like to know what's wrong - some changes in driver in a recent years > or smth going wrong while OS detecting this NIC. But that's confusing, > because this exact NIC worked years ago... > > -- > amd_miek > Think different. > Just superior. > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig > n=sig-email&utm_content=webmail> ??? > ???????. www.avast.ru > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig > n=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > _______________________________________________ > freebsd-stable at freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
Hello. I looked into svn code for 8.3R and 11.1R and there seems no changes in descriptors/identifiers. So I think that NIC is being wrongly identified during startup process - it is being recognized with a wrong PCI VID. How can this be checked or fixed? I use a loadable kernel module after a startup, so there is no useful messages during boot process. 15 ????. 2017 ?. 11:00 PM ???????????? "Mike Black" <amdmiek at gmail.com> ???????:> Hello > > I've got old PCI NIC D-Link DGE530T Rev 11 with SysKonnect chip on it. > Years ago it worked in FreeBSD 8/9 Stable with if_sk driver. > > Now I'm runnig > 11.1-STABLE FreeBSD 11.1-STABLE #1 r323214: Sat Nov 11 19:06:20 MSK 2017 > amd_miek at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 > 1101502 1101502 > > But recently I plugged this card back and it's not being recognized by a > driver. > > pciconf says that is > none0 at pci0:5:1:0: class=0x020000 card=0x4b011086 chip=0x4b011086 > rev=0x11 hdr=0x00 > vendor = 'J. Bond Computer Systems' > class = network > subclass = ethernet > bar [10] = type Memory, range 32, base 0xfebec000, size 16384, > enabled > bar [14] = type I/O Port, range 32, base 0xee00, size 512, enabled > cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D3 > cap 03[50] = VPD > > According /usr/share/misc/pci_vendors this D-link should have 4b011186 not > 4b011086. > I looked into driver code (if_sk) and it expects 1186 card also. > I googled about this issue but found no one similar in a recent years > So I'd like to know what's wrong - some changes in driver in a recent > years or smth going wrong while OS detecting this NIC. But that's > confusing, because this exact NIC worked years ago... > > -- > amd_miek > Think different. > Just superior. > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> ??? > ???????. www.avast.ru > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> > <#m_6570072101733768544_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >