Miroslav Lachman
2017-Oct-11 08:18 UTC
cannot access Areca controller after OS upgrade to 10.4-RELEASE
Hello, We have machine with Areca controller: arcmsr0: <Areca SATA 3G Host Adapter RAID Controller arcmsr version 1.40.00.00 2017-07-11 > mem 0xde000000-0xde0fffff,0xde110000-0xde11ffff,0xde100000-0xde10ffff irq 17 at device 0.0 on pci2 Areca RAID adapter0: ARC-1200 F/W version V1.50 2012-01-04 smartmontools worked on device arcmsr0 for years, but after system upgrade from 10.3 to 10.4-RELEASE smartmontools does not return results, it hangs indefinitely. Smartmontools packages are built on our Poudriere with OS version 10.4 so it should match. We use smartctl with this params: # smartctl -A -d areca,2 /dev/arcmsr0 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.4-RELEASE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org Nothing more is displayed. Pressing Ctrl+T gives me load: 3.01 cmd: smartctl 25305 [running] 71.45r 3.09u 68.25s 100% 4204k load: 3.01 cmd: smartctl 25305 [running] 74.96r 3.26u 71.58s 100% 4204k I tried to run areca-cli but it also shows nothing. OS is running from RAID device da0 fine, but controller info is inaccessible. Was there some changes between 10.3 / 10.4? What can I do to debug this problem? Kind regards Miroslav Lachman