OK, this is fairly easy to repeat. If I start a sync of a snapshot via
zrep, it hangs the box. CTRL+T shows
DEBUG: overiding stale lock on zroot/chyves from pid 19378
sending zroot/chyves at zrep_000010 to 10.151.9.2:zroot/chyves
cannot receive new filesystem stream: destination
'zroot/chyves/guests/resi/disk1' exists
must specify -F to overwrite it
^C
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 358.94r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 360.42r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 360.79r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 360.99r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 361.19r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 361.37r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 361.55r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 361.74r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 361.92r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 362.11r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 362.31r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 362.50r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 362.69r 0.00u 0.00s 0%
3476k
load: 0.48 cmd: zfs 29690 [tx->tx_sync_done_cv] 362.90r 0.00u 0.00s 0%
3476k
load: 0.52 cmd: zfs 29690 [tx->tx_sync_done_cv] 363.08r 0.00u 0.00s 0%
3476k
On 8/24/2017 11:48 AM, Mike Tancsa wrote:> I upgraded a server yesterday from RELENG_11 from march 2017 to r322800
> (Aug 22) and noticed that under heavy disk IO in a VM, the server is
> locking up. In the vm, I was doing a large untar and I noticed that
> prior to the lockup, the hypervisor would be struggling to keep up the
> disk writes. The VM is on a zvol if that makes any difference. A few
> times in the VM, IO would be clogged to the point that the disk would
> timeout in the VM
>
> Aug 24 08:32:02 kernel: ahcich6: Timeout on slot 14 port 0
> Aug 24 08:32:02 kernel: ahcich6: is 00000000 cs 00000000 ss ffffffff rs
> ffffffff tfd 50 serr 00000000 cmd 0001db17
> Aug 24 08:32:02 kernel: (ada1:ahcich6:0:0:0): WRITE_FPDMA_QUEUED. ACB:
> 61 00 a8 47 d8 40 01 00 00 01 00 00
> Aug 24 08:32:02 kernel: (ada1:ahcich6:0:0:0): CAM status: Command timeout
> Aug 24 08:32:02 kernel: (ada1:ahcich6:0:0:0): Retrying command
>
> When the parent deadlocks, I cant run anything thats not already in RAM.
> shutdown doesnt work and I have to reboot the box via IPMI.
>
> Any ideas how to debug this or try and better understand the problem so
> I can at least work around it ?
>
> ---Mike
>
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/