Hans Petter Selasky
2017-Aug-07 17:09 UTC
[USB] hang after upgrade from 11.0 to 11.1, ZFS or callout() related?
On 08/07/17 18:28, Michael Schmiedgen wrote:> dmesg: > > Aug 7 18:26:34 antares kernel: usbd_pipe_enter: enter > Aug 7 18:26:34 antares kernel: usbd_pipe_enter: enter > Aug 7 18:26:34 antares kernel: usbd_pipe_start: start > Aug 7 18:26:34 antares kernel: usbd_pipe_start: start > Aug 7 18:26:34 antares kernel: usbd_transfer_done: > err=USB_ERR_NORMAL_COMPLETION > Aug 7 18:26:34 antares kernel: usbd_transfer_done: > err=USB_ERR_NORMAL_COMPLETION > Aug 7 18:26:34 antares kernelCan you get dmesg without the USB debug enabled? --HPS
Michael Schmiedgen
2017-Aug-07 17:17 UTC
[USB] hang after upgrade from 11.0 to 11.1, ZFS or callout() related?
On 07.08.2017 19:09, Hans Petter Selasky wrote:> > Can you get dmesg without the USB debug enabled? >But this is all for 11.0, on 11.1 it hangs and I cannot look it up: Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016 root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E31245 @ 3.30GHz (3300.09-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33186914304 (31649 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x4 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device pcib2: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7e04000-0xf7e043ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib3: [GIANT-LOCKED] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci3: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 17 at device 0.0 on pci3 em0: Using MSIX interrupts with 3 vectors em0: Ethernet address: 10:bf:48:d7:f1:29 em0: netmap queues/slots: TX 1/1024, RX 1/1024 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci4: <ACPI PCI bus> on pcib5 xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7c00000-0xf7c07fff irq 19 at device 0.0 on pci4 xhci0: 32 bytes context size, 32-bit DMA xhci0: Unable to map MSI-X table usbus1 on xhci0 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7e03000-0xf7e033ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e02000-0xf7e027ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 usbus0: 480Mbps High Speed USB v2.0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec nvme cam probe device init usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <0x1b21> at usbus1 uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: 4 ports with 4 removable, self powered ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST33000650NS 0004> ATA8-ACS SATA 3.x device ada0: Serial Number Z292SCYD ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 2861588MB (5860533168 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST33000650NS 0004> ATA8-ACS SATA 3.x device ada1: Serial Number Z292QCBX ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 2861588MB (5860533168 512 byte sectors) SMP: AP CPU #1 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! Timecounter "TSC-low" frequency 1650042874 Hz quality 1000 Trying to mount root from zfs:tank []... Root mount waiting for: usbus2 usbus0 uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus2 usbus0 ugen2.2: <vendor 0x8087> at usbus2 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen0.2: <vendor 0x8087> at usbus0 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 uhub4: 6 ports with 6 removable, self powered Root mount waiting for: usbus2 usbus0 uhub3: 8 ports with 8 removable, self powered ugen2.3: <vendor 0x05e3> at usbus2 uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.63, addr 3> on usbus2 Root mount waiting for: usbus2 uhub5: 4 ports with 4 removable, self powered ugen2.4: <Peppercon AG> at usbus2 ukbd0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 4> on usbus2 kbd2 at ukbd0 uhid0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 4> on usbus2 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled em0: link state changed to UP -- ___________________________ Michael Schmiedgen, BSc Senior Software Engineer Takwa GmbH Friedrich-List-Str. 36 99096 Erfurt GERMANY Tel +49 361 6534096 Fax +49 361 6534097 Mail schmiedgen at takwa.de Web http://www.takwa.de/ ___________________________ Amtsgericht Jena HRB 112964 Gesch?ftsf?hrung: Ingo Buchholz