It?s an SM961, not PM951.
> Am 21.07.2017 um 20:24 schrieb Stefan Bethke <stb at lassitu.de>:
>
> I have a fresh SuperMicro SYS-5019S-M and I?ve installed a Samsung SM961
128GBB, which I want to use as a ZFS cache.
>
> After installing 11.1-RC3, I?m getting the below errors during boot, and
trying to read or write to it produces the same message.
>
> Is there a tunable to make this work? A quick test with Windows did not
show any issues.
>
>
> Stefan
>
> --
> Stefan Bethke <stb at lassitu.de> Fon +49 151 14070811
>
>
>
> Copyright (c) 1992-2017 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.1-RC3 #0 r320976: Fri Jul 14 02:20:44 UTC 2017
> root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
> FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM
4.0.0)
> VT(vga): resolution 640x480
> CPU: Intel(R) Xeon(R) CPU E3-1240 v6 @ 3.70GHz (3696.16-MHz K8-class CPU)
> Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e
Stepping=9
>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
> AMD Features2=0x121<LAHF,ABM,Prefetch>
> Structured Extended
Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
> TSC: P-state invariant, performance statistics
> real memory = 68719476736 (65536 MB)
> avail memory = 66668195840 (63579 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: < >
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
> random: unblocking device.
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #7 Launched!
> Timecounter "TSC-low" frequency 1848080854 Hz quality 1000
> random: entropy device external interface
> kbd1 at kbdmux0
> netmap: loaded module
> module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19
> random: registering fast source Intel Secure Key RNG
> random: fast provider: "Intel Secure Key RNG"
> nexus0
> vtvga0: <VT VGA driver> on motherboard
> cryptosoft0: <software crypto> on motherboard
> acpi0: <SUPERM SUPERM> on motherboard
> acpi0: Power Button (fixed)
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
> Timecounter "HPET" frequency 24000000 Hz quality 950
> Event timer "HPET" frequency 24000000 Hz quality 550
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on
acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <old, non-VGA display device> at device 19.0 (no driver
attached)
> xhci0: <Intel Sunrise Point USB 3.0 controller> mem
0xdf400000-0xdf40ffff irq 16 at device 20.0 on pci0
> xhci0: 32 bytes context size, 64-bit DMA
> usbus0 on xhci0
> usbus0: 5.0Gbps Super Speed USB v3.0
> pci0: <simple comms> at device 22.0 (no driver attached)
> pci0: <simple comms> at device 22.1 (no driver attached)
> ahci0: <Intel Sunrise Point AHCI SATA controller> port
0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem
0xdf410000-0xdf411fff,0xdf41e000-0xdf41e0ff,0xdf41d000-0xdf41d7ff irq 16 at
device 23.0 on pci0
> ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich3: <AHCI channel> at channel 3 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> ahcich6: <AHCI channel> at channel 6 on ahci0
> ahcich7: <AHCI channel> at channel 7 on ahci0
> ahciem0: <AHCI enclosure management bridge> on ahci0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port
0xe000-0xe01f mem 0xdf300000-0xdf37ffff,0xdf380000-0xdf383fff irq 16 at device
0.0 on pci1
> igb0: Using MSIX interrupts with 5 vectors
> igb0: Ethernet address: ac:1f:6b:18:06:6e
> igb0: Bound queue 0 to cpu 0
> igb0: Bound queue 1 to cpu 1
> igb0: Bound queue 2 to cpu 2
> igb0: Bound queue 3 to cpu 3
> igb0: netmap queues/slots: TX 4/1024, RX 4/1024
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> pci2: <ACPI PCI bus> on pcib2
> igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port
0xd000-0xd01f mem 0xdf200000-0xdf27ffff,0xdf280000-0xdf283fff irq 17 at device
0.0 on pci2
> igb1: Using MSIX interrupts with 5 vectors
> igb1: Ethernet address: ac:1f:6b:18:06:6f
> igb1: Bound queue 0 to cpu 4
> igb1: Bound queue 1 to cpu 5
> igb1: Bound queue 2 to cpu 6
> igb1: Bound queue 3 to cpu 7
> igb1: netmap queues/slots: TX 4/1024, RX 4/1024
> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci3: <ACPI PCI bus> on pcib3
> nvme0: <Generic NVMe Device> mem 0xdf100000-0xdf103fff irq 16 at
device 0.0 on pci3
> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
> pci5: <ACPI PCI bus> on pcib5
> vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem
0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 18 at device 0.0 on pci5
> vgapci0: Boot video device
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <memory> at device 31.2 (no driver attached)
> acpi_button0: <Sleep Button> on acpi0
> acpi_button1: <Power Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
> ppc0: cannot reserve I/O port range
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> nvme cam probe device init
> ugen0.1: <0x8086 XHCI root HUB> at usbus0
> uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
usbus0
> nvd0: <SAMSUNG MZVPW128HEGM-00000> NVMe namespace
> nvd0: 122104MB (250069680 512 byte sectors)
> ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
> ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
> ses0: SEMB SES Device
> ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
> ada0: <ST3000DM001-1CH166 CC27> ACS-2 ATA SATA 3.x device
> ada0: Serial Number W1F50MGQ
> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 2861588MB (5860533168 512 byte sectors)
> ada0: quirks=0x1<4K>
> ada1 at ahcich5 bus 0 scbus5 target 0 lun 0
> ada1: <ST3000DM001-1CH166 CC24> ATA8-ACS SATA 3.x device
> ada1: Serial Number W1F29WMP
> ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 2861588MB (5860533168 512 byte sectors)
> ada1: quirks=0x1<4K>
> Trying to mount root from zfs:zroot/ROOT/default []...
> Root mount waiting for: usbus0
> uhub0: 26 ports with 26 removable, self powered
> Root mount waiting for: usbus0
> ugen0.2: <Apple, Inc. Keyboard Hub> at usbus0
> uhub1 on uhub0
> uhub1: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 1>
on usbus0
> Root mount waiting for: usbus0
> uhub1: 3 ports with 2 removable, bus powered
> ugen0.3: <Apple, Inc Apple Keyboard> at usbus0
> ukbd0 on uhub1
> ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 2>
on usbus0
> kbd2 at ukbd0
> Root mount waiting for: usbus0
> Root mount waiting for: usbus0
> ugen0.4: <JetFlash Mass Storage Device> at usbus0
> umass0 on uhub0
> umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr
3> on usbus0
> umass0: SCSI over Bulk-Only; quirks = 0x8100
> umass0:9:0: Attached to scbus9
> da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
> da0: <JetFlash Transcend 16GB 1100> Removable Direct Access SCSI
device
> da0: Serial Number 05E3MIRCU1FD9Y8U
> da0: 40.000MB/s transfers
> da0: 15296MB (31326208 512 byte sectors)
> da0: quirks=0x12<NO_6_BYTE,NO_RC16>
> GEOM: da0: the secondary GPT header is not in the last LBA.
> ugen0.5: <vendor 0x0557 product 0x7000> at usbus0
> uhub2 on uhub0
> uhub2: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr
4> on usbus0
> uhub2: 4 ports with 3 removable, self powered
> Root mount waiting for: usbus0
> ugen0.6: <vendor 0x0557 product 0x2419> at usbus0
> ukbd1 on uhub2
> ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr
5> on usbus0
> kbd3 at ukbd1
> nvme0: resetting controller
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0
> nvme0: resetting controller
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0
> nvme0: resetting controller
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0
> nvme0: resetting controller
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0
> nvme0: resetting controller
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0
> nvme0: aborting outstanding i/o
> nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224
> nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0
> igb0: link state changed to UP
> uhid0 on uhub1
> uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 2>
on usbus0
> ums0 on uhub2
> ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr
5> on usbus0
> ums0: 3 buttons and [Z] coordinates ID=0
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at
freebsd.org"
--
Stefan Bethke <stb at lassitu.de> Fon +49 151 14070811