Hello!
I got silent data corruption when transferring data via em(4) interface on
10.2-STABLE r286912.
1. I got broken large file transferred via ftp (MD5 checksum mismatched);
2. I got disconnects when transferring large data via ssh with messages:
Corrupted MAC on input.
Disconnecting: Packet corrupt
Problem occurs only after few hours of uptime. Immediately after reboot I
transferred same file via ftp without any errors.
I tried to use:
- em0 and em2 interfaces in link aggregation
- em1 as "clean" interface
But I got same problem in both cases.
Also one time when transferring file I got this messages:
em0: Interface stopped DISTRIBUTING, possible flapping
em0: Watchdog timeout -- resetting
em2: Interface stopped DISTRIBUTING, possible flapping
em2: Watchdog timeout -- resetting
netstat -in does not see any problems:
Name    Mtu Network       Address              Ipkts Ierrs Idrop    Opkts
Oerrs  Coll
em0    1500 <Link#1>      00:14:4f:01:3f:7a  6689452     0     0
146720     0     0
em1    1500 <Link#2>      00:14:4f:01:3f:7b  5732168     0     0
2865912     0     0
em2    1500 <Link#3>      00:14:4f:01:3f:7c   501817     0     0
3392333     0     0
Network adapters is build in to the Sun Fire X4100 mother board:
em0 at pci0:1:1:0: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x03
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82546EB Gigabit Ethernet Controller (Copper)'
    class      = network
    subclass   = ethernet
TCP_OFFLOAD disabled in kernel's config.
Any ideas?
-- 
MATPOCKuH
On 08/20/15 at 12:57P, KOT MATPOCKuH wrote:> Hello! > > I got silent data corruption when transferring data via em(4) interface on > 10.2-STABLE r286912. > 1. I got broken large file transferred via ftp (MD5 checksum mismatched); > 2. I got disconnects when transferring large data via ssh with messages: > Corrupted MAC on input. > Disconnecting: Packet corrupt > > Problem occurs only after few hours of uptime. Immediately after reboot I > transferred same file via ftp without any errors. > > I tried to use: > - em0 and em2 interfaces in link aggregation > - em1 as "clean" interface > But I got same problem in both cases. > > Also one time when transferring file I got this messages: > em0: Interface stopped DISTRIBUTING, possible flapping > em0: Watchdog timeout -- resetting > em2: Interface stopped DISTRIBUTING, possible flapping > em2: Watchdog timeout -- resetting > > netstat -in does not see any problems: > Name Mtu Network Address Ipkts Ierrs Idrop Opkts > Oerrs Coll > em0 1500 <Link#1> 00:14:4f:01:3f:7a 6689452 0 0 > 146720 0 0 > em1 1500 <Link#2> 00:14:4f:01:3f:7b 5732168 0 0 > 2865912 0 0 > em2 1500 <Link#3> 00:14:4f:01:3f:7c 501817 0 0 > 3392333 0 0 > > Network adapters is build in to the Sun Fire X4100 mother board: > em0 at pci0:1:1:0: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82546EB Gigabit Ethernet Controller (Copper)' > class = network > subclass = ethernet > > TCP_OFFLOAD disabled in kernel's config.See if disabling TSO helps. You can disable on the interface with '-tso'. Cheers, Hiren -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 618 bytes Desc: not available URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20150824/7e550967/attachment.bin>
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 On 08/20/15 02:57, KOT MATPOCKuH wrote:> Hello! > > I got silent data corruption when transferring data via em(4) > interface on 10.2-STABLE r286912. 1. I got broken large file > transferred via ftp (MD5 checksum mismatched); 2. I got disconnects > when transferring large data via ssh with messages: Corrupted MAC > on input. Disconnecting: Packet corrupt > > Problem occurs only after few hours of uptime. Immediately after > reboot I transferred same file via ftp without any errors. > > I tried to use: - em0 and em2 interfaces in link aggregation - em1 > as "clean" interface But I got same problem in both cases. > > Also one time when transferring file I got this messages: em0: > Interface stopped DISTRIBUTING, possible flapping em0: Watchdog > timeout -- resetting em2: Interface stopped DISTRIBUTING, possible > flapping em2: Watchdog timeout -- resetting > > netstat -in does not see any problems: Name Mtu Network > Address Ipkts Ierrs Idrop Opkts Oerrs Coll em0 > 1500 <Link#1> 00:14:4f:01:3f:7a 6689452 0 0 146720 > 0 0 em1 1500 <Link#2> 00:14:4f:01:3f:7b 5732168 0 > 0 2865912 0 0 em2 1500 <Link#3> 00:14:4f:01:3f:7c > 501817 0 0 3392333 0 0 > > Network adapters is build in to the Sun Fire X4100 mother board: > em0 at pci0:1:1:0: class=0x020000 card=0x10118086 chip=0x10108086 > rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device > '82546EB Gigabit Ethernet Controller (Copper)' class > network subclass = ethernet > > TCP_OFFLOAD disabled in kernel's config. > > Any ideas? >Can you file a bugzilla report for this with all possible information from your report? sean -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQF8BAEBCgBmBQJV25vFXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXRCQUFENDYzMkU3MTIxREU4RDIwOTk3REQx MjAxRUZDQTFFNzI3RTY0AAoJEBIB78oecn5kyC8H+QFLXz2hbRmkBhTlxExfZpUw ZtWDvrwJAnLXXsMVPi+E3icGLX2YYljw/MCpD8LqxJTs2jQOc+X3wIjI4nt5WEHI ve/KTpsdYjdxvLrIFRgUbt+oCv8C0NFfmQNsLqFRCe2Cz3tUtdwQsFGUXH6NkKxN Xj3tC1yBRwwVoywhmaU5uahaBtv4IC6x00iDkbjrX9GZKiBZD11HcGYyNMoCUFsP Njz1UZjtuztuy1IuDXbVn+HMm90VOsRziMgU2LQmsWTp6sSw+T/45ce0UYzrlhEl n/50fboUdS8k8kfjjyxid2kaskOAfe/qWZB59qdiKFDdgBFz7/oBRwN/yq6Ww1U=fy/H -----END PGP SIGNATURE-----